From: Felix Kuehling <felix.kuehling@amd.com>
To: "Jeremy Cline" <jcline@redhat.com>,
"Alex Deucher" <alexander.deucher@amd.com>,
"Christian König" <christian.koenig@amd.com>
Cc: David Airlie <airlied@linux.ie>, Daniel Vetter <daniel@ffwll.ch>,
Kent Russell <kent.russell@amd.com>,
amd-gfx@lists.freedesktop.org, dri-devel@lists.freedesktop.org,
linux-kernel@vger.kernel.org
Subject: Re: [PATCH] drm/amdkfd: Fix out-of-bounds read in kdf_create_vcrat_image_cpu()
Date: Fri, 8 Jan 2021 18:46:17 -0500 [thread overview]
Message-ID: <a341f82d-5933-3df3-f665-cbb4fb5fc5ff@amd.com> (raw)
In-Reply-To: <20210108163104.411442-1-jcline@redhat.com>
Am 2021-01-08 um 11:31 a.m. schrieb Jeremy Cline:
> KASAN reported a slab-out-of-bounds read of size 1 in
> kdf_create_vcrat_image_cpu().
>
> This occurs when, for example, when on an x86_64 with a single NUMA node
> because kfd_fill_iolink_info_for_cpu() is a no-op, but afterwards the
> sub_type_hdr->length, which is out-of-bounds, is read and multiplied by
> entries. Fortunately, entries is 0 in this case so the overall
> crat_table->length is still correct.
That's a pretty big change to fix that. Wouldn't it be enough to add a
simple check after calling kfd_fill_iolink_info_for_cpu:
if (entries) {
crat_table->length += (sub_type_hdr->length * entries);
crat_table->total_entries += entries;
}
Or change the output parameters of the kfd_fill_..._for_cpu functions
from num_entries to size_filled, so the caller doesn't need to read
sub_type_hdr->length any more.
Regards,
Felix
>
> This refactors the helper functions to accept the crat_table directly
> and calculate the table entry pointer based on the current table length.
> This allows us to avoid an out-of-bounds read and hopefully makes the
> pointer arithmetic clearer. It should have no functional change beyond
> removing the out-of-bounds read.
>
> Fixes: b7b6c38529c9 ("drm/amdkfd: Calculate CPU VCRAT size dynamically (v2)")
> Signed-off-by: Jeremy Cline <jcline@redhat.com>
> ---
> drivers/gpu/drm/amd/amdkfd/kfd_crat.c | 86 +++++++++++++--------------
> 1 file changed, 40 insertions(+), 46 deletions(-)
>
> diff --git a/drivers/gpu/drm/amd/amdkfd/kfd_crat.c b/drivers/gpu/drm/amd/amdkfd/kfd_crat.c
> index 8cac497c2c45..e50db2c0f4ee 100644
> --- a/drivers/gpu/drm/amd/amdkfd/kfd_crat.c
> +++ b/drivers/gpu/drm/amd/amdkfd/kfd_crat.c
> @@ -829,21 +829,24 @@ int kfd_create_crat_image_acpi(void **crat_image, size_t *size)
> /* kfd_fill_cu_for_cpu - Fill in Compute info for the given CPU NUMA node
> *
> * @numa_node_id: CPU NUMA node id
> - * @avail_size: Available size in the memory
> - * @sub_type_hdr: Memory into which compute info will be filled in
> + * @avail_size: Available space in bytes at the end of the @crat_table.
> + * @crat_table: The CRAT table to append the Compute info to;
> + * on success the table length and total_entries count is updated.
> *
> * Return 0 if successful else return -ve value
> */
> static int kfd_fill_cu_for_cpu(int numa_node_id, int *avail_size,
> - int proximity_domain,
> - struct crat_subtype_computeunit *sub_type_hdr)
> + struct crat_header *crat_table)
> {
> const struct cpumask *cpumask;
> + struct crat_subtype_computeunit *sub_type_hdr;
>
> *avail_size -= sizeof(struct crat_subtype_computeunit);
> if (*avail_size < 0)
> return -ENOMEM;
>
> + sub_type_hdr = (typeof(sub_type_hdr))((char *)crat_table +
> + crat_table->length);
> memset(sub_type_hdr, 0, sizeof(struct crat_subtype_computeunit));
>
> /* Fill in subtype header data */
> @@ -855,36 +858,42 @@ static int kfd_fill_cu_for_cpu(int numa_node_id, int *avail_size,
>
> /* Fill in CU data */
> sub_type_hdr->flags |= CRAT_CU_FLAGS_CPU_PRESENT;
> - sub_type_hdr->proximity_domain = proximity_domain;
> + sub_type_hdr->proximity_domain = crat_table->num_domains;
> sub_type_hdr->processor_id_low = kfd_numa_node_to_apic_id(numa_node_id);
> if (sub_type_hdr->processor_id_low == -1)
> return -EINVAL;
>
> sub_type_hdr->num_cpu_cores = cpumask_weight(cpumask);
>
> + crat_table->length += sub_type_hdr->length;
> + crat_table->total_entries++;
> +
> return 0;
> }
>
> /* kfd_fill_mem_info_for_cpu - Fill in Memory info for the given CPU NUMA node
> *
> * @numa_node_id: CPU NUMA node id
> - * @avail_size: Available size in the memory
> - * @sub_type_hdr: Memory into which compute info will be filled in
> + * @avail_size: Available space in bytes at the end of the @crat_table.
> + * @crat_table: The CRAT table to append the Memory info to;
> + * on success the table length and total_entries count is updated.
> *
> * Return 0 if successful else return -ve value
> */
> static int kfd_fill_mem_info_for_cpu(int numa_node_id, int *avail_size,
> - int proximity_domain,
> - struct crat_subtype_memory *sub_type_hdr)
> + struct crat_header *crat_table)
> {
> uint64_t mem_in_bytes = 0;
> pg_data_t *pgdat;
> int zone_type;
> + struct crat_subtype_memory *sub_type_hdr;
>
> *avail_size -= sizeof(struct crat_subtype_memory);
> if (*avail_size < 0)
> return -ENOMEM;
>
> + sub_type_hdr = (typeof(sub_type_hdr))((char *)crat_table +
> + crat_table->length);
> memset(sub_type_hdr, 0, sizeof(struct crat_subtype_memory));
>
> /* Fill in subtype header data */
> @@ -905,27 +914,37 @@ static int kfd_fill_mem_info_for_cpu(int numa_node_id, int *avail_size,
>
> sub_type_hdr->length_low = lower_32_bits(mem_in_bytes);
> sub_type_hdr->length_high = upper_32_bits(mem_in_bytes);
> - sub_type_hdr->proximity_domain = proximity_domain;
> + sub_type_hdr->proximity_domain = crat_table->num_domains;
> +
> + crat_table->length += sub_type_hdr->length;
> + crat_table->total_entries++;
>
> return 0;
> }
>
> #ifdef CONFIG_X86_64
> +/* kfd_fill_iolink_info_for_cpu() - Add IO link info to a Virtual CRAT
> + *
> + * @numa_node_id: The NUMA node ID for the CPU; as from for_each_online_node()
> + * @avail_size: Available space in bytes at the end of the @crat_table.
> + * @crat_table: The CRAT table to append the IO link info to; on success the
> + * table length and total_entries count is updated.
> + *
> + * Return: 0 if successful else return -ve value
> + */
> static int kfd_fill_iolink_info_for_cpu(int numa_node_id, int *avail_size,
> - uint32_t *num_entries,
> - struct crat_subtype_iolink *sub_type_hdr)
> + struct crat_header *crat_table)
> {
> int nid;
> struct cpuinfo_x86 *c = &cpu_data(0);
> uint8_t link_type;
> + struct crat_subtype_iolink *sub_type_hdr;
>
> if (c->x86_vendor == X86_VENDOR_AMD)
> link_type = CRAT_IOLINK_TYPE_HYPERTRANSPORT;
> else
> link_type = CRAT_IOLINK_TYPE_QPI_1_1;
>
> - *num_entries = 0;
> -
> /* Create IO links from this node to other CPU nodes */
> for_each_online_node(nid) {
> if (nid == numa_node_id) /* node itself */
> @@ -935,6 +954,8 @@ static int kfd_fill_iolink_info_for_cpu(int numa_node_id, int *avail_size,
> if (*avail_size < 0)
> return -ENOMEM;
>
> + sub_type_hdr = (typeof(sub_type_hdr))((char *)crat_table +
> + crat_table->length);
> memset(sub_type_hdr, 0, sizeof(struct crat_subtype_iolink));
>
> /* Fill in subtype header data */
> @@ -947,8 +968,8 @@ static int kfd_fill_iolink_info_for_cpu(int numa_node_id, int *avail_size,
> sub_type_hdr->proximity_domain_to = nid;
> sub_type_hdr->io_interface_type = link_type;
>
> - (*num_entries)++;
> - sub_type_hdr++;
> + crat_table->length += sub_type_hdr->length;
> + crat_table->total_entries++;
> }
>
> return 0;
> @@ -966,12 +987,8 @@ static int kfd_create_vcrat_image_cpu(void *pcrat_image, size_t *size)
> struct crat_header *crat_table = (struct crat_header *)pcrat_image;
> struct acpi_table_header *acpi_table;
> acpi_status status;
> - struct crat_subtype_generic *sub_type_hdr;
> int avail_size = *size;
> int numa_node_id;
> -#ifdef CONFIG_X86_64
> - uint32_t entries = 0;
> -#endif
> int ret = 0;
>
> if (!pcrat_image)
> @@ -1003,48 +1020,25 @@ static int kfd_create_vcrat_image_cpu(void *pcrat_image, size_t *size)
> crat_table->total_entries = 0;
> crat_table->num_domains = 0;
>
> - sub_type_hdr = (struct crat_subtype_generic *)(crat_table+1);
> -
> for_each_online_node(numa_node_id) {
> if (kfd_numa_node_to_apic_id(numa_node_id) == -1)
> continue;
>
> /* Fill in Subtype: Compute Unit */
> - ret = kfd_fill_cu_for_cpu(numa_node_id, &avail_size,
> - crat_table->num_domains,
> - (struct crat_subtype_computeunit *)sub_type_hdr);
> + ret = kfd_fill_cu_for_cpu(numa_node_id, &avail_size, crat_table);
> if (ret < 0)
> return ret;
> - crat_table->length += sub_type_hdr->length;
> - crat_table->total_entries++;
> -
> - sub_type_hdr = (typeof(sub_type_hdr))((char *)sub_type_hdr +
> - sub_type_hdr->length);
>
> /* Fill in Subtype: Memory */
> - ret = kfd_fill_mem_info_for_cpu(numa_node_id, &avail_size,
> - crat_table->num_domains,
> - (struct crat_subtype_memory *)sub_type_hdr);
> + ret = kfd_fill_mem_info_for_cpu(numa_node_id, &avail_size, crat_table);
> if (ret < 0)
> return ret;
> - crat_table->length += sub_type_hdr->length;
> - crat_table->total_entries++;
> -
> - sub_type_hdr = (typeof(sub_type_hdr))((char *)sub_type_hdr +
> - sub_type_hdr->length);
>
> /* Fill in Subtype: IO Link */
> #ifdef CONFIG_X86_64
> - ret = kfd_fill_iolink_info_for_cpu(numa_node_id, &avail_size,
> - &entries,
> - (struct crat_subtype_iolink *)sub_type_hdr);
> + ret = kfd_fill_iolink_info_for_cpu(numa_node_id, &avail_size, crat_table);
> if (ret < 0)
> return ret;
> - crat_table->length += (sub_type_hdr->length * entries);
> - crat_table->total_entries += entries;
> -
> - sub_type_hdr = (typeof(sub_type_hdr))((char *)sub_type_hdr +
> - sub_type_hdr->length * entries);
> #else
> pr_info("IO link not available for non x86 platforms\n");
> #endif
next prev parent reply other threads:[~2021-01-08 23:47 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-01-08 16:31 Jeremy Cline
2021-01-08 23:46 ` Felix Kuehling [this message]
2021-01-09 2:26 ` Jeremy Cline
2021-01-11 21:05 ` [PATCH v2] " Jeremy Cline
2021-01-11 21:46 ` Felix Kuehling
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=a341f82d-5933-3df3-f665-cbb4fb5fc5ff@amd.com \
--to=felix.kuehling@amd.com \
--cc=airlied@linux.ie \
--cc=alexander.deucher@amd.com \
--cc=amd-gfx@lists.freedesktop.org \
--cc=christian.koenig@amd.com \
--cc=daniel@ffwll.ch \
--cc=dri-devel@lists.freedesktop.org \
--cc=jcline@redhat.com \
--cc=kent.russell@amd.com \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®