From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S932746AbeE2Jt0 (ORCPT ); Tue, 29 May 2018 05:49:26 -0400 Received: from mail.bootlin.com ([62.4.15.54]:50050 "EHLO mail.bootlin.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S932418AbeE2JtV (ORCPT ); Tue, 29 May 2018 05:49:21 -0400 From: Maxime Ripard To: Thierry Reding , Chen-Yu Tsai , Maxime Ripard Cc: dri-devel@lists.freedesktop.org, Gustavo Padovan , Daniel Vetter , Maarten Lankhorst , Sean Paul , linux-kernel@vger.kernel.org, Linus Walleij Subject: [PATCH v5 1/3] dt-bindings: panel: Add the Ilitek ILI9881c panel documentation Date: Tue, 29 May 2018 11:49:14 +0200 Message-Id: X-Mailer: git-send-email 2.17.0 In-Reply-To: References: In-Reply-To: References: Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org The LHR050H41 from BananaPi is a 1280x700 4-lanes DSI panel based on the ILI9881c from Ilitek. Acked-by: Rob Herring Signed-off-by: Maxime Ripard --- Documentation/devicetree/bindings/display/panel/ilitek,ili9881c.txt | 20 ++++++++++++++++++++ 1 file changed, 20 insertions(+) create mode 100644 Documentation/devicetree/bindings/display/panel/ilitek,ili9881c.txt diff --git a/Documentation/devicetree/bindings/display/panel/ilitek,ili9881c.txt b/Documentation/devicetree/bindings/display/panel/ilitek,ili9881c.txt new file mode 100644 index 000000000000..4a041acb4e18 --- /dev/null +++ b/Documentation/devicetree/bindings/display/panel/ilitek,ili9881c.txt @@ -0,0 +1,20 @@ +Ilitek ILI9881c based MIPI-DSI panels + +Required properties: + - compatible: must be "ilitek,ili9881c" and one of: + * "bananapi,lhr050h41" + - reg: DSI virtual channel used by that screen + - power-supply: phandle to the power regulator + - reset-gpios: a GPIO phandle for the reset pin + +Optional properties: + - backlight: phandle to the backlight used + +Example: +panel@0 { + compatible = "bananapi,lhr050h41", "ilitek,ili9881c"; + reg = <0>; + power-supply = <®_display>; + reset-gpios = <&r_pio 0 5 GPIO_ACTIVE_LOW>; /* PL05 */ + backlight = <&pwm_bl>; +}; -- git-series 0.9.1