Re: [PATCH] mdio-airoha: fix refcount leak in airoha_mdio_probe()

[Andrew Lunn <andrew@lunn.ch>]

On Tue, Jun 09, 2026 at 09:07:29AM +0000, Wentao Liang wrote:
> In airoha_mdio_probe(), after calling reset_control_deassert(),
> if clk_set_rate() fails, the function returns immediately without
> calling reset_control_assert().  This leaves the reset line
> deasserted and causes a reference count leak on shared reset
> controllers.  The devm cleanup does not assert the reset line, so
> the unbalanced deassert persists.
> 
> Fix this by adding a reset_control_assert() call on the
> clk_set_rate() error path, matching the existing error handling
> for devm_of_mdiobus_register().
> 
> Cc: stable@vger.kernel.org
> Fixes: 67e3ba978361 ("net: mdio: Add MDIO bus controller for Airoha AN7583")
> Signed-off-by: Wentao Liang <vulab@iscas.ac.cn>
> ---
>  drivers/net/mdio/mdio-airoha.c | 4 +++-
>  1 file changed, 3 insertions(+), 1 deletion(-)
> 
> diff --git a/drivers/net/mdio/mdio-airoha.c b/drivers/net/mdio/mdio-airoha.c
> index 52e7475121ea..030482b8318f 100644
> --- a/drivers/net/mdio/mdio-airoha.c
> +++ b/drivers/net/mdio/mdio-airoha.c
> @@ -245,8 +245,10 @@ static int airoha_mdio_probe(struct platform_device *pdev)
>  		freq = 2500000;
>  
>  	ret = clk_set_rate(priv->clk, freq);
> -	if (ret)
> +	if (ret) {
> +		reset_control_assert(priv->reset);
>  		return ret;
> +	}
>  
>  	ret = devm_of_mdiobus_register(dev, bus, dev->of_node);
>  	if (ret) {

devm_of_mdiobus_register() also calls reset_control_assert() on
error. So please put all the error cleanup handling at the end and use
goto.

    Andrew

---
pw-bot: cr