From: Alexander Beregalov <a.beregalov@gmail.com>
To: linux-acpi@vger.kernel.org, LKML <linux-kernel@vger.kernel.org>
Subject: 2.6.30-rc1: acpi: bus uevent() returned -12; ACPI: I/O resource w83627hf conflicts with ACPI region IP__
Date: Sun, 29 Mar 2009 20:53:46 +0400 [thread overview]
Message-ID: <a4423d670903290953w200513a0h69121cbe0249022a@mail.gmail.com> (raw)
[-- Attachment #1: Type: text/plain, Size: 1389 bytes --]
Hi
kernel is 2.6.29-05093-gc31f403
Full dmesg is attached.
ACPI: EC: Look up EC in DSDT
ACPI: Interpreter enabled
ACPI: (supports S0 S5)
ACPI: Using IOAPIC for interrupt routing
bus: 'acpi': registered
device: 'LNXSYSTM:00': device_add
bus: 'acpi': add device LNXSYSTM:00
device: 'LNXPWRBN:00': device_add
bus: 'acpi': add device LNXPWRBN:00
device: 'ACPI_CPU:00': device_add
bus: 'acpi': add device ACPI_CPU:00
device: 'device:00': device_add
bus: 'acpi': add device device:00
device: 'device:00': dev_uevent: bus uevent() returned -12
<..>
device: 'device:15': device_add
bus: 'acpi': add device device:15
device: 'device:15': dev_uevent: bus uevent() returned -12
<..>
w83627hf: Found W83627HF chip at 0x290
bus: 'platform': add driver w83627hf
ACPI: I/O resource w83627hf [0x295-0x296] conflicts with ACPI region
IP__ [0x295-0x296]
ACPI: Device needs an ACPI driver
w83627hf.656: use which platform_data?
Registering platform device 'w83627hf.656'. Parent at platform
device: 'w83627hf.656': device_add
bus: 'platform': add device w83627hf.656
bus: 'platform': driver_probe_device: matched device w83627hf.656 with
driver w83627hf
bus: 'platform': really_probe: probing driver w83627hf with device w83627hf.656
device: 'hwmon0': device_add
driver: 'w83627hf.656': driver_bound: bound to device 'w83627hf'
bus: 'platform': really_probe: bound device w83627hf.656 to driver w83627hf
[-- Attachment #2: tor-dmesg --]
[-- Type: application/octet-stream, Size: 72899 bytes --]
Linux version 2.6.29-05093-gc31f403-dirty (fireball@tor) (gcc version 4.3.3 (Gentoo 4.3.3-r2 p1.1, pie-10.1.5) ) #1 PREEMPT Sun Mar 29 19:37:46 MSD 2009
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
NSC Geode by NSC
Cyrix CyrixInstead
Centaur CentaurHauls
Transmeta GenuineTMx86
Transmeta TransmetaCPU
UMC UMC UMC UMC
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009d000 (usable)
BIOS-e820: 000000000009d000 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000005fff0000 (usable)
BIOS-e820: 000000005fff0000 - 000000005fff3000 (ACPI NVS)
BIOS-e820: 000000005fff3000 - 0000000060000000 (ACPI data)
BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
debug: ignoring loglevel setting.
DMI 2.2 present.
last_pfn = 0x5fff0 max_arch_pfn = 0x100000
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
kernel direct mapping tables up to 377fe000 @ b75000-c56000
ACPI: RSDP 000F6B00, 0014 (r0 Nvidia)
ACPI: RSDT 5FFF3000, 002C (r1 Nvidia AWRDACPI 42302E31 AWRD 0)
ACPI: FACP 5FFF3040, 0074 (r1 Nvidia AWRDACPI 42302E31 AWRD 0)
FADT: X_PM1a_EVT_BLK.bit_width (16) does not match PM1_EVT_LEN (4)
ACPI: DSDT 5FFF30C0, 48E8 (r1 NVIDIA AWRDACPI 1000 MSFT 100000D)
ACPI: FACS 5FFF0000, 0040
ACPI: APIC 5FFF79C0, 005A (r1 Nvidia AWRDACPI 42302E31 AWRD 0)
ACPI: Local APIC address 0xfee00000
647MB HIGHMEM available.
887MB LOWMEM available.
mapped low ram: 0 - 377fe000
low ram: 00000000 - 377fe000
bootmap 00001000 - 00007f00
(6 early reservations) ==> bootmem [0000000000 - 00377fe000]
#0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
#1 [0000100000 - 0000b5f650] TEXT DATA BSS ==> [0000100000 - 0000b5f650]
#2 [0000b60000 - 0000b75000] INIT_PG_TABLE ==> [0000b60000 - 0000b75000]
#3 [000009d000 - 0000100000] BIOS reserved ==> [000009d000 - 0000100000]
#4 [0000b75000 - 0000c3e000] PGTABLE ==> [0000b75000 - 0000c3e000]
#5 [0000001000 - 0000008000] BOOTMAP ==> [0000001000 - 0000008000]
Zone PFN ranges:
DMA 0x00000000 -> 0x00001000
Normal 0x00001000 -> 0x000377fe
HighMem 0x000377fe -> 0x0005fff0
Movable zone start PFN for each node
early_node_map[2] active PFN ranges
0: 0x00000000 -> 0x0000009d
0: 0x00000100 -> 0x0005fff0
On node 0 totalpages: 393101
free_area_init_node: node 0, pgdat c06d8720, node_mem_map c1001000
DMA zone: 32 pages used for memmap
DMA zone: 0 pages reserved
DMA zone: 3965 pages, LIFO batch:0
Normal zone: 1744 pages used for memmap
Normal zone: 221486 pages, LIFO batch:31
HighMem zone: 1296 pages used for memmap
HighMem zone: 164578 pages, LIFO batch:31
Using APIC driver default
Nvidia board detected. Ignoring ACPI timer override.
If you got timer trouble try acpi_use_timer_override
ACPI: PM-Timer IO Port: 0x4008
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: BIOS IRQ0 pin2 override ignored.
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ9 used by override.
Enabling APIC mode: Flat. Using 1 I/O APICs
Using ACPI (MADT) for SMP configuration information
nr_irqs_gsi: 24
Allocating PCI resources starting at 70000000 (gap: 60000000:9ec00000)
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 390029
Kernel command line: root=/dev/sda1 netconsole=@192.168.99.1/eth0,6666@192.168.99.2/00:1d:7d:d1:c3:69 console=tty1 console=ttyS0,115200 ignore_loglevel ro
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
Preemptible RCU implementation.
NR_IRQS:288
PID hash table entries: 4096 (order: 12, 16384 bytes)
Fast TSC calibration using PIT
Detected 1830.121 MHz processor.
Console: colour VGA+ 80x25
console [tty1] enabled
console [ttyS0] enabled
Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar
... MAX_LOCKDEP_SUBCLASSES: 8
... MAX_LOCK_DEPTH: 48
... MAX_LOCKDEP_KEYS: 8191
... CLASSHASH_SIZE: 4096
... MAX_LOCKDEP_ENTRIES: 8192
... MAX_LOCKDEP_CHAINS: 16384
... CHAINHASH_SIZE: 8192
memory used by lock dependency info: 2591 kB
per task-struct memory footprint: 1920 bytes
------------------------
| Locking API testsuite:
----------------------------------------------------------------------------
| spin |wlock |rlock |mutex | wsem | rsem |
--------------------------------------------------------------------------
A-A deadlock: ok | ok | ok | ok | ok | ok |
A-B-B-A deadlock: ok | ok | ok | ok | ok | ok |
A-B-B-C-C-A deadlock: ok | ok | ok | ok | ok | ok |
A-B-C-A-B-C deadlock: ok | ok | ok | ok | ok | ok |
A-B-B-C-C-D-D-A deadlock: ok | ok | ok | ok | ok | ok |
A-B-C-D-B-D-D-A deadlock: ok | ok | ok | ok | ok | ok |
A-B-C-D-B-C-D-A deadlock: ok | ok | ok | ok | ok | ok |
double unlock: ok | ok | ok | ok | ok | ok |
initialize held: ok | ok | ok | ok | ok | ok |
bad unlock order: ok | ok | ok | ok | ok | ok |
--------------------------------------------------------------------------
recursive read-lock: | ok | | ok |
recursive read-lock #2: | ok | | ok |
mixed read-write-lock: | ok | | ok |
mixed write-read-lock: | ok | | ok |
--------------------------------------------------------------------------
hard-irqs-on + irq-safe-A/12: ok | ok | ok |
soft-irqs-on + irq-safe-A/12: ok | ok | ok |
hard-irqs-on + irq-safe-A/21: ok | ok | ok |
soft-irqs-on + irq-safe-A/21: ok | ok | ok |
sirq-safe-A => hirqs-on/12: ok | ok | ok |
sirq-safe-A => hirqs-on/21: ok | ok | ok |
hard-safe-A + irqs-on/12: ok | ok | ok |
soft-safe-A + irqs-on/12: ok | ok | ok |
hard-safe-A + irqs-on/21: ok | ok | ok |
soft-safe-A + irqs-on/21: ok | ok | ok |
hard-safe-A + unsafe-B #1/123: ok | ok | ok |
soft-safe-A + unsafe-B #1/123: ok | ok | ok |
hard-safe-A + unsafe-B #1/132: ok | ok | ok |
soft-safe-A + unsafe-B #1/132: ok | ok | ok |
hard-safe-A + unsafe-B #1/213: ok | ok | ok |
soft-safe-A + unsafe-B #1/213: ok | ok | ok |
hard-safe-A + unsafe-B #1/231: ok | ok | ok |
soft-safe-A + unsafe-B #1/231: ok | ok | ok |
hard-safe-A + unsafe-B #1/312: ok | ok | ok |
soft-safe-A + unsafe-B #1/312: ok | ok | ok |
hard-safe-A + unsafe-B #1/321: ok | ok | ok |
soft-safe-A + unsafe-B #1/321: ok | ok | ok |
hard-safe-A + unsafe-B #2/123: ok | ok | ok |
soft-safe-A + unsafe-B #2/123: ok | ok | ok |
hard-safe-A + unsafe-B #2/132: ok | ok | ok |
soft-safe-A + unsafe-B #2/132: ok | ok | ok |
hard-safe-A + unsafe-B #2/213: ok | ok | ok |
soft-safe-A + unsafe-B #2/213: ok | ok | ok |
hard-safe-A + unsafe-B #2/231: ok | ok | ok |
soft-safe-A + unsafe-B #2/231: ok | ok | ok |
hard-safe-A + unsafe-B #2/312: ok | ok | ok |
soft-safe-A + unsafe-B #2/312: ok | ok | ok |
hard-safe-A + unsafe-B #2/321: ok | ok | ok |
soft-safe-A + unsafe-B #2/321: ok | ok | ok |
hard-irq lock-inversion/123: ok | ok | ok |
soft-irq lock-inversion/123: ok | ok | ok |
hard-irq lock-inversion/132: ok | ok | ok |
soft-irq lock-inversion/132: ok | ok | ok |
hard-irq lock-inversion/213: ok | ok | ok |
soft-irq lock-inversion/213: ok | ok | ok |
hard-irq lock-inversion/231: ok | ok | ok |
soft-irq lock-inversion/231: ok | ok | ok |
hard-irq lock-inversion/312: ok | ok | ok |
soft-irq lock-inversion/312: ok | ok | ok |
hard-irq lock-inversion/321: ok | ok | ok |
soft-irq lock-inversion/321: ok | ok | ok |
hard-irq read-recursion/123: ok |
soft-irq read-recursion/123: ok |
hard-irq read-recursion/132: ok |
soft-irq read-recursion/132: ok |
hard-irq read-recursion/213: ok |
soft-irq read-recursion/213: ok |
hard-irq read-recursion/231: ok |
soft-irq read-recursion/231: ok |
hard-irq read-recursion/312: ok |
soft-irq read-recursion/312: ok |
hard-irq read-recursion/321: ok |
soft-irq read-recursion/321: ok |
-------------------------------------------------------
Good, all 218 testcases passed! |
---------------------------------
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Memory: 1546868k/1572800k available (3334k kernel code, 24684k reserved, 2701k data, 260k init, 663496k highmem)
virtual kernel memory layout:
fixmap : 0xfff9e000 - 0xfffff000 ( 388 kB)
pkmap : 0xff800000 - 0xffc00000 (4096 kB)
vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB)
lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB)
.init : 0xc06e8000 - 0xc0729000 ( 260 kB)
.data : 0xc0441911 - 0xc06e4dd0 (2701 kB)
.text : 0xc0100000 - 0xc0441911 (3334 kB)
Checking if this processor honours the WP bit even in supervisor mode...Ok.
SLUB: Genslabs=13, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
Calibrating delay loop (skipped), value calculated using timer frequency.. 3660.24 BogoMIPS (lpj=18301210)
Mount-cache hash table entries: 512
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 512K (64 bytes/line)
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU: AMD Athlon(tm) XP 2500+ stepping 00
Checking 'hlt' instruction... OK.
ACPI: Core revision 20081204
..TIMER: vector=0x30 apic1=0 pin1=0 apic2=-1 pin2=-1
device: 'platform': device_add
bus: 'platform': registered
Registering sysdev class 'cpu'
net_namespace: 408 bytes
khelper used greatest stack depth: 7160 bytes left
NET: Registered protocol family 16
device class 'bdi': registering
device class 'pci_bus': registering
bus: 'pci': registered
device class 'tty': registering
device class 'vtconsole': registering
device: 'vtcon0': device_add
bus: 'i2c': registered
device class 'i2c-adapter': registering
bus: 'i2c': add driver dummy
ACPI: bus type pci registered
PCI: PCI BIOS revision 2.10 entry at 0xfb420, last bus=2
PCI: Using configuration type 1 for base access
Registering sys device of class 'cpu'
Registering sys device 'cpu0'
device: 'default': device_add
bio: create slab <bio-0> at 0
device class 'block': registering
khelper used greatest stack depth: 7052 bytes left
ACPI: EC: Look up EC in DSDT
ACPI: Interpreter enabled
ACPI: (supports S0 S5)
ACPI: Using IOAPIC for interrupt routing
bus: 'acpi': registered
device: 'LNXSYSTM:00': device_add
bus: 'acpi': add device LNXSYSTM:00
device: 'LNXPWRBN:00': device_add
bus: 'acpi': add device LNXPWRBN:00
device: 'ACPI_CPU:00': device_add
bus: 'acpi': add device ACPI_CPU:00
device: 'device:00': device_add
bus: 'acpi': add device device:00
device: 'device:00': dev_uevent: bus uevent() returned -12
device: 'PNP0C02:00': device_add
bus: 'acpi': add device PNP0C02:00
device: 'PNP0C02:01': device_add
bus: 'acpi': add device PNP0C02:01
device: 'PNP0C0C:00': device_add
bus: 'acpi': add device PNP0C0C:00
device: 'PNP0C01:00': device_add
bus: 'acpi': add device PNP0C01:00
device: 'PNP0A03:00': device_add
bus: 'acpi': add device PNP0A03:00
device: 'device:01': device_add
bus: 'acpi': add device device:01
device: 'device:01': dev_uevent: bus uevent() returned -12
device: 'device:02': device_add
bus: 'acpi': add device device:02
device: 'device:02': dev_uevent: bus uevent() returned -12
device: 'device:03': device_add
bus: 'acpi': add device device:03
device: 'device:03': dev_uevent: bus uevent() returned -12
device: 'device:04': device_add
bus: 'acpi': add device device:04
device: 'device:04': dev_uevent: bus uevent() returned -12
device: 'device:05': device_add
bus: 'acpi': add device device:05
device: 'device:05': dev_uevent: bus uevent() returned -12
device: 'device:06': device_add
bus: 'acpi': add device device:06
device: 'device:06': dev_uevent: bus uevent() returned -12
device: 'device:07': device_add
bus: 'acpi': add device device:07
device: 'device:07': dev_uevent: bus uevent() returned -12
device: 'device:08': device_add
bus: 'acpi': add device device:08
device: 'device:08': dev_uevent: bus uevent() returned -12
device: 'device:09': device_add
bus: 'acpi': add device device:09
device: 'device:09': dev_uevent: bus uevent() returned -12
device: 'device:0a': device_add
bus: 'acpi': add device device:0a
device: 'device:0a': dev_uevent: bus uevent() returned -12
device: 'device:0b': device_add
bus: 'acpi': add device device:0b
device: 'device:0b': dev_uevent: bus uevent() returned -12
device: 'device:0c': device_add
bus: 'acpi': add device device:0c
device: 'device:0c': dev_uevent: bus uevent() returned -12
device: 'device:0d': device_add
bus: 'acpi': add device device:0d
device: 'device:0d': dev_uevent: bus uevent() returned -12
device: 'device:0e': device_add
bus: 'acpi': add device device:0e
device: 'device:0e': dev_uevent: bus uevent() returned -12
device: 'device:0f': device_add
bus: 'acpi': add device device:0f
device: 'device:0f': dev_uevent: bus uevent() returned -12
device: 'device:10': device_add
bus: 'acpi': add device device:10
device: 'device:10': dev_uevent: bus uevent() returned -12
device: 'device:11': device_add
bus: 'acpi': add device device:11
device: 'device:11': dev_uevent: bus uevent() returned -12
device: 'device:12': device_add
bus: 'acpi': add device device:12
device: 'device:12': dev_uevent: bus uevent() returned -12
device: 'device:13': device_add
bus: 'acpi': add device device:13
device: 'device:13': dev_uevent: bus uevent() returned -12
device: 'device:14': device_add
bus: 'acpi': add device device:14
device: 'device:14': dev_uevent: bus uevent() returned -12
device: 'device:15': device_add
bus: 'acpi': add device device:15
device: 'device:15': dev_uevent: bus uevent() returned -12
device: 'PNP0C0F:00': device_add
bus: 'acpi': add device PNP0C0F:00
device: 'PNP0C0F:01': device_add
bus: 'acpi': add device PNP0C0F:01
device: 'PNP0C0F:02': device_add
bus: 'acpi': add device PNP0C0F:02
device: 'PNP0C0F:03': device_add
bus: 'acpi': add device PNP0C0F:03
device: 'PNP0C0F:04': device_add
bus: 'acpi': add device PNP0C0F:04
device: 'PNP0C0F:05': device_add
bus: 'acpi': add device PNP0C0F:05
device: 'PNP0C0F:06': device_add
bus: 'acpi': add device PNP0C0F:06
device: 'PNP0C0F:07': device_add
bus: 'acpi': add device PNP0C0F:07
device: 'PNP0C0F:08': device_add
bus: 'acpi': add device PNP0C0F:08
device: 'PNP0C0F:09': device_add
bus: 'acpi': add device PNP0C0F:09
device: 'PNP0C0F:0a': device_add
bus: 'acpi': add device PNP0C0F:0a
device: 'PNP0C0F:0b': device_add
bus: 'acpi': add device PNP0C0F:0b
device: 'PNP0C0F:0c': device_add
bus: 'acpi': add device PNP0C0F:0c
device: 'PNP0C0F:0d': device_add
bus: 'acpi': add device PNP0C0F:0d
device: 'PNP0C0F:0e': device_add
bus: 'acpi': add device PNP0C0F:0e
device: 'PNP0C0F:0f': device_add
bus: 'acpi': add device PNP0C0F:0f
device: 'PNP0C0F:10': device_add
bus: 'acpi': add device PNP0C0F:10
device: 'PNP0C0F:11': device_add
bus: 'acpi': add device PNP0C0F:11
device: 'PNP0C0F:12': device_add
bus: 'acpi': add device PNP0C0F:12
device: 'PNP0C0F:13': device_add
bus: 'acpi': add device PNP0C0F:13
device: 'PNP0C0F:14': device_add
bus: 'acpi': add device PNP0C0F:14
device: 'PNP0C0F:15': device_add
bus: 'acpi': add device PNP0C0F:15
device: 'PNP0C0F:16': device_add
bus: 'acpi': add device PNP0C0F:16
device: 'PNP0C0F:17': device_add
bus: 'acpi': add device PNP0C0F:17
device: 'PNP0C0F:18': device_add
bus: 'acpi': add device PNP0C0F:18
device: 'PNP0C0F:19': device_add
bus: 'acpi': add device PNP0C0F:19
device: 'PNP0C0F:1a': device_add
bus: 'acpi': add device PNP0C0F:1a
device: 'PNP0C0F:1b': device_add
bus: 'acpi': add device PNP0C0F:1b
device: 'PNP0C0F:1c': device_add
bus: 'acpi': add device PNP0C0F:1c
device: 'PNP0C0F:1d': device_add
bus: 'acpi': add device PNP0C0F:1d
device: 'PNP0C0F:1e': device_add
bus: 'acpi': add device PNP0C0F:1e
device: 'PNP0C0F:1f': device_add
bus: 'acpi': add device PNP0C0F:1f
device: 'PNP0C02:02': device_add
bus: 'acpi': add device PNP0C02:02
device: 'PNP0000:00': device_add
bus: 'acpi': add device PNP0000:00
device: 'PNP0200:00': device_add
bus: 'acpi': add device PNP0200:00
device: 'PNP0100:00': device_add
bus: 'acpi': add device PNP0100:00
device: 'PNP0B00:00': device_add
bus: 'acpi': add device PNP0B00:00
device: 'PNP0800:00': device_add
bus: 'acpi': add device PNP0800:00
device: 'PNP0C04:00': device_add
bus: 'acpi': add device PNP0C04:00
device: 'PNP0501:00': device_add
bus: 'acpi': add device PNP0501:00
device: 'PNP0501:01': device_add
bus: 'acpi': add device PNP0501:01
device: 'PNP0303:00': device_add
bus: 'acpi': add device PNP0303:00
device: 'LNXTHERM:00': device_add
bus: 'acpi': add device LNXTHERM:00
device: 'PNP0C0B:00': device_add
bus: 'acpi': add device PNP0C0B:00
device: 'LNXTHERM:01': device_add
bus: 'acpi': add device LNXTHERM:01
bus: 'acpi': add driver ec
ACPI: No dock devices found.
bus: 'acpi': add driver pci_root
bus: 'acpi': driver_probe_device: matched device PNP0A03:00 with driver pci_root
bus: 'acpi': really_probe: probing driver pci_root with device PNP0A03:00
ACPI: PCI Root Bridge [PCI0] (0000:00)
device: 'pci0000:00': device_add
device: '0000:00': device_add
pci 0000:00:00.0: reg 10 32bit mmio: [0xe8000000-0xe9ffffff]
pci 0000:00:00.0: nForce2 C1 Halt Disconnect fixup
pci 0000:00:01.1: reg 10 io port: [0xe800-0xe81f]
pci 0000:00:01.1: PME# supported from D3hot D3cold
pci 0000:00:01.1: PME# disabled
pci 0000:00:02.0: reg 10 32bit mmio: [0xee002000-0xee002fff]
pci 0000:00:02.0: supports D1 D2
pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:02.0: PME# disabled
pci 0000:00:02.1: reg 10 32bit mmio: [0xee003000-0xee003fff]
pci 0000:00:02.1: supports D1 D2
pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:02.1: PME# disabled
pci 0000:00:02.2: reg 10 32bit mmio: [0xee004000-0xee0040ff]
pci 0000:00:02.2: supports D1 D2
pci 0000:00:02.2: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:02.2: PME# disabled
pci 0000:00:04.0: reg 10 32bit mmio: [0xee000000-0xee000fff]
pci 0000:00:04.0: reg 14 io port: [0xec00-0xec07]
pci 0000:00:04.0: supports D1 D2
pci 0000:00:04.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:04.0: PME# disabled
pci 0000:00:09.0: reg 20 io port: [0xf000-0xf00f]
pci 0000:01:08.0: reg 10 io port: [0xa000-0xa007]
pci 0000:01:08.0: reg 14 io port: [0xa400-0xa403]
pci 0000:01:08.0: reg 18 io port: [0xa800-0xa807]
pci 0000:01:08.0: reg 1c io port: [0xac00-0xac03]
pci 0000:01:08.0: reg 20 io port: [0xb000-0xb00f]
pci 0000:01:08.0: reg 24 32bit mmio: [0xed040000-0xed04ffff]
pci 0000:01:08.0: reg 30 32bit mmio: [0x000000-0x00ffff]
pci 0000:01:08.0: supports D1
pci 0000:01:0a.0: reg 10 32bit mmio: [0xed000000-0xed01ffff]
pci 0000:01:0a.0: reg 14 32bit mmio: [0xed020000-0xed03ffff]
pci 0000:01:0a.0: reg 18 io port: [0xb400-0xb43f]
pci 0000:01:0a.0: reg 30 32bit mmio: [0x000000-0x01ffff]
pci 0000:01:0a.0: PME# supported from D0 D3hot D3cold
pci 0000:01:0a.0: PME# disabled
pci 0000:00:08.0: bridge io port: [0xa000-0xcfff]
pci 0000:00:08.0: bridge 32bit mmio: [0xec000000-0xedffffff]
pci 0000:02:00.0: reg 10 32bit mmio: [0xe0000000-0xe3ffffff]
pci 0000:02:00.0: reg 14 io port: [0xd000-0xd0ff]
pci 0000:02:00.0: reg 18 32bit mmio: [0xeb000000-0xeb00ffff]
pci 0000:02:00.0: reg 30 32bit mmio: [0x000000-0x01ffff]
pci 0000:02:00.0: supports D1 D2
pci 0000:02:00.1: reg 10 32bit mmio: [0xe4000000-0xe7ffffff]
pci 0000:02:00.1: reg 14 32bit mmio: [0xeb010000-0xeb01ffff]
pci 0000:02:00.1: supports D1 D2
pci 0000:00:1e.0: bridge io port: [0xd000-0xdfff]
pci 0000:00:1e.0: bridge 32bit mmio: [0xea000000-0xebffffff]
pci 0000:00:1e.0: bridge 32bit mmio pref: [0xe0000000-0xe7ffffff]
pci_bus 0000:00: on NUMA node 0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGPB._PRT]
device: '0000:00:00.0': device_add
bus: 'pci': add device 0000:00:00.0
device: '0000:00:00.1': device_add
bus: 'pci': add device 0000:00:00.1
device: '0000:00:00.2': device_add
bus: 'pci': add device 0000:00:00.2
device: '0000:00:00.3': device_add
bus: 'pci': add device 0000:00:00.3
device: '0000:00:00.4': device_add
bus: 'pci': add device 0000:00:00.4
device: '0000:00:00.5': device_add
bus: 'pci': add device 0000:00:00.5
device: '0000:00:01.0': device_add
bus: 'pci': add device 0000:00:01.0
device: '0000:00:01.1': device_add
bus: 'pci': add device 0000:00:01.1
device: '0000:00:02.0': device_add
bus: 'pci': add device 0000:00:02.0
device: '0000:00:02.1': device_add
bus: 'pci': add device 0000:00:02.1
device: '0000:00:02.2': device_add
bus: 'pci': add device 0000:00:02.2
device: '0000:00:04.0': device_add
bus: 'pci': add device 0000:00:04.0
device: '0000:00:08.0': device_add
bus: 'pci': add device 0000:00:08.0
device: '0000:00:09.0': device_add
bus: 'pci': add device 0000:00:09.0
device: '0000:00:1e.0': device_add
bus: 'pci': add device 0000:00:1e.0
device: '0000:01:08.0': device_add
bus: 'pci': add device 0000:01:08.0
device: '0000:01:0a.0': device_add
bus: 'pci': add device 0000:01:0a.0
device: '0000:01': device_add
device: '0000:02:00.0': device_add
bus: 'pci': add device 0000:02:00.0
device: '0000:02:00.1': device_add
bus: 'pci': add device 0000:02:00.1
device: '0000:02': device_add
driver: 'PNP0A03:00': driver_bound: bound to device 'pci_root'
bus: 'acpi': really_probe: bound device PNP0A03:00 to driver pci_root
bus: 'acpi': add driver pci_link
bus: 'acpi': driver_probe_device: matched device PNP0C0F:00 with driver pci_link
bus: 'acpi': really_probe: probing driver pci_link with device PNP0C0F:00
ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 10 *11 12 14 15)
driver: 'PNP0C0F:00': driver_bound: bound to device 'pci_link'
bus: 'acpi': really_probe: bound device PNP0C0F:00 to driver pci_link
bus: 'acpi': driver_probe_device: matched device PNP0C0F:01 with driver pci_link
bus: 'acpi': really_probe: probing driver pci_link with device PNP0C0F:01
ACPI: PCI Interrupt Link [LNK2] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
driver: 'PNP0C0F:01': driver_bound: bound to device 'pci_link'
bus: 'acpi': really_probe: bound device PNP0C0F:01 to driver pci_link
bus: 'acpi': driver_probe_device: matched device PNP0C0F:02 with driver pci_link
bus: 'acpi': really_probe: probing driver pci_link with device PNP0C0F:02
ACPI: PCI Interrupt Link [LNK3] (IRQs 3 4 5 6 7 10 11 *12 14 15)
driver: 'PNP0C0F:02': driver_bound: bound to device 'pci_link'
bus: 'acpi': really_probe: bound device PNP0C0F:02 to driver pci_link
bus: 'acpi': driver_probe_device: matched device PNP0C0F:03 with driver pci_link
bus: 'acpi': really_probe: probing driver pci_link with device PNP0C0F:03
ACPI: PCI Interrupt Link [LNK4] (IRQs 3 4 *5 6 7 10 11 12 14 15)
driver: 'PNP0C0F:03': driver_bound: bound to device 'pci_link'
bus: 'acpi': really_probe: bound device PNP0C0F:03 to driver pci_link
bus: 'acpi': driver_probe_device: matched device PNP0C0F:04 with driver pci_link
bus: 'acpi': really_probe: probing driver pci_link with device PNP0C0F:04
ACPI: PCI Interrupt Link [LNK5] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
driver: 'PNP0C0F:04': driver_bound: bound to device 'pci_link'
bus: 'acpi': really_probe: bound device PNP0C0F:04 to driver pci_link
bus: 'acpi': driver_probe_device: matched device PNP0C0F:05 with driver pci_link
bus: 'acpi': really_probe: probing driver pci_link with device PNP0C0F:05
ACPI: PCI Interrupt Link [LUBA] (IRQs 3 4 5 6 7 *10 11 12 14 15)
driver: 'PNP0C0F:05': driver_bound: bound to device 'pci_link'
bus: 'acpi': really_probe: bound device PNP0C0F:05 to driver pci_link
bus: 'acpi': driver_probe_device: matched device PNP0C0F:06 with driver pci_link
bus: 'acpi': really_probe: probing driver pci_link with device PNP0C0F:06
ACPI: PCI Interrupt Link [LUBB] (IRQs 3 4 5 6 7 10 *11 12 14 15)
driver: 'PNP0C0F:06': driver_bound: bound to device 'pci_link'
bus: 'acpi': really_probe: bound device PNP0C0F:06 to driver pci_link
bus: 'acpi': driver_probe_device: matched device PNP0C0F:07 with driver pci_link
bus: 'acpi': really_probe: probing driver pci_link with device PNP0C0F:07
ACPI: PCI Interrupt Link [LMAC] (IRQs 3 4 5 6 7 *10 11 12 14 15)
driver: 'PNP0C0F:07': driver_bound: bound to device 'pci_link'
bus: 'acpi': really_probe: bound device PNP0C0F:07 to driver pci_link
bus: 'acpi': driver_probe_device: matched device PNP0C0F:08 with driver pci_link
bus: 'acpi': really_probe: probing driver pci_link with device PNP0C0F:08
ACPI: PCI Interrupt Link [LAPU] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
driver: 'PNP0C0F:08': driver_bound: bound to device 'pci_link'
bus: 'acpi': really_probe: bound device PNP0C0F:08 to driver pci_link
bus: 'acpi': driver_probe_device: matched device PNP0C0F:09 with driver pci_link
bus: 'acpi': really_probe: probing driver pci_link with device PNP0C0F:09
ACPI: PCI Interrupt Link [LACI] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
driver: 'PNP0C0F:09': driver_bound: bound to device 'pci_link'
bus: 'acpi': really_probe: bound device PNP0C0F:09 to driver pci_link
bus: 'acpi': driver_probe_device: matched device PNP0C0F:0a with driver pci_link
bus: 'acpi': really_probe: probing driver pci_link with device PNP0C0F:0a
ACPI: PCI Interrupt Link [LMCI] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
driver: 'PNP0C0F:0a': driver_bound: bound to device 'pci_link'
bus: 'acpi': really_probe: bound device PNP0C0F:0a to driver pci_link
bus: 'acpi': driver_probe_device: matched device PNP0C0F:0b with driver pci_link
bus: 'acpi': really_probe: probing driver pci_link with device PNP0C0F:0b
ACPI: PCI Interrupt Link [LSMB] (IRQs 3 4 5 6 7 10 11 *12 14 15)
driver: 'PNP0C0F:0b': driver_bound: bound to device 'pci_link'
bus: 'acpi': really_probe: bound device PNP0C0F:0b to driver pci_link
bus: 'acpi': driver_probe_device: matched device PNP0C0F:0c with driver pci_link
bus: 'acpi': really_probe: probing driver pci_link with device PNP0C0F:0c
ACPI: PCI Interrupt Link [LUB2] (IRQs 3 4 5 6 *7 10 11 12 14 15)
driver: 'PNP0C0F:0c': driver_bound: bound to device 'pci_link'
bus: 'acpi': really_probe: bound device PNP0C0F:0c to driver pci_link
bus: 'acpi': driver_probe_device: matched device PNP0C0F:0d with driver pci_link
bus: 'acpi': really_probe: probing driver pci_link with device PNP0C0F:0d
ACPI: PCI Interrupt Link [LFIR] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
driver: 'PNP0C0F:0d': driver_bound: bound to device 'pci_link'
bus: 'acpi': really_probe: bound device PNP0C0F:0d to driver pci_link
bus: 'acpi': driver_probe_device: matched device PNP0C0F:0e with driver pci_link
bus: 'acpi': really_probe: probing driver pci_link with device PNP0C0F:0e
ACPI: PCI Interrupt Link [L3CM] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
driver: 'PNP0C0F:0e': driver_bound: bound to device 'pci_link'
bus: 'acpi': really_probe: bound device PNP0C0F:0e to driver pci_link
bus: 'acpi': driver_probe_device: matched device PNP0C0F:0f with driver pci_link
bus: 'acpi': really_probe: probing driver pci_link with device PNP0C0F:0f
ACPI: PCI Interrupt Link [LIDE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
driver: 'PNP0C0F:0f': driver_bound: bound to device 'pci_link'
bus: 'acpi': really_probe: bound device PNP0C0F:0f to driver pci_link
bus: 'acpi': driver_probe_device: matched device PNP0C0F:10 with driver pci_link
bus: 'acpi': really_probe: probing driver pci_link with device PNP0C0F:10
ACPI: PCI Interrupt Link [APC1] (IRQs *16)
driver: 'PNP0C0F:10': driver_bound: bound to device 'pci_link'
bus: 'acpi': really_probe: bound device PNP0C0F:10 to driver pci_link
bus: 'acpi': driver_probe_device: matched device PNP0C0F:11 with driver pci_link
bus: 'acpi': really_probe: probing driver pci_link with device PNP0C0F:11
ACPI: PCI Interrupt Link [APC2] (IRQs *17), disabled.
driver: 'PNP0C0F:11': driver_bound: bound to device 'pci_link'
bus: 'acpi': really_probe: bound device PNP0C0F:11 to driver pci_link
bus: 'acpi': driver_probe_device: matched device PNP0C0F:12 with driver pci_link
bus: 'acpi': really_probe: probing driver pci_link with device PNP0C0F:12
ACPI: PCI Interrupt Link [APC3] (IRQs *18)
driver: 'PNP0C0F:12': driver_bound: bound to device 'pci_link'
bus: 'acpi': really_probe: bound device PNP0C0F:12 to driver pci_link
bus: 'acpi': driver_probe_device: matched device PNP0C0F:13 with driver pci_link
bus: 'acpi': really_probe: probing driver pci_link with device PNP0C0F:13
ACPI: PCI Interrupt Link [APC4] (IRQs *19)
driver: 'PNP0C0F:13': driver_bound: bound to device 'pci_link'
bus: 'acpi': really_probe: bound device PNP0C0F:13 to driver pci_link
bus: 'acpi': driver_probe_device: matched device PNP0C0F:14 with driver pci_link
bus: 'acpi': really_probe: probing driver pci_link with device PNP0C0F:14
ACPI: PCI Interrupt Link [APCE] (IRQs *16), disabled.
driver: 'PNP0C0F:14': driver_bound: bound to device 'pci_link'
bus: 'acpi': really_probe: bound device PNP0C0F:14 to driver pci_link
bus: 'acpi': driver_probe_device: matched device PNP0C0F:15 with driver pci_link
bus: 'acpi': really_probe: probing driver pci_link with device PNP0C0F:15
ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22) *0
driver: 'PNP0C0F:15': driver_bound: bound to device 'pci_link'
bus: 'acpi': really_probe: bound device PNP0C0F:15 to driver pci_link
bus: 'acpi': driver_probe_device: matched device PNP0C0F:16 with driver pci_link
bus: 'acpi': really_probe: probing driver pci_link with device PNP0C0F:16
ACPI: PCI Interrupt Link [APCG] (IRQs 20 21 22) *0
driver: 'PNP0C0F:16': driver_bound: bound to device 'pci_link'
bus: 'acpi': really_probe: bound device PNP0C0F:16 to driver pci_link
bus: 'acpi': driver_probe_device: matched device PNP0C0F:17 with driver pci_link
bus: 'acpi': really_probe: probing driver pci_link with device PNP0C0F:17
ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22) *0
driver: 'PNP0C0F:17': driver_bound: bound to device 'pci_link'
bus: 'acpi': really_probe: bound device PNP0C0F:17 to driver pci_link
bus: 'acpi': driver_probe_device: matched device PNP0C0F:18 with driver pci_link
bus: 'acpi': really_probe: probing driver pci_link with device PNP0C0F:18
ACPI: PCI Interrupt Link [APCI] (IRQs 20 21 22) *0, disabled.
driver: 'PNP0C0F:18': driver_bound: bound to device 'pci_link'
bus: 'acpi': really_probe: bound device PNP0C0F:18 to driver pci_link
bus: 'acpi': driver_probe_device: matched device PNP0C0F:19 with driver pci_link
bus: 'acpi': really_probe: probing driver pci_link with device PNP0C0F:19
ACPI: PCI Interrupt Link [APCJ] (IRQs 20 21 22) *0, disabled.
driver: 'PNP0C0F:19': driver_bound: bound to device 'pci_link'
bus: 'acpi': really_probe: bound device PNP0C0F:19 to driver pci_link
bus: 'acpi': driver_probe_device: matched device PNP0C0F:1a with driver pci_link
bus: 'acpi': really_probe: probing driver pci_link with device PNP0C0F:1a
ACPI: PCI Interrupt Link [APCK] (IRQs 20 21 22) *0, disabled.
driver: 'PNP0C0F:1a': driver_bound: bound to device 'pci_link'
bus: 'acpi': really_probe: bound device PNP0C0F:1a to driver pci_link
bus: 'acpi': driver_probe_device: matched device PNP0C0F:1b with driver pci_link
bus: 'acpi': really_probe: probing driver pci_link with device PNP0C0F:1b
ACPI: PCI Interrupt Link [APCS] (IRQs *23)
driver: 'PNP0C0F:1b': driver_bound: bound to device 'pci_link'
bus: 'acpi': really_probe: bound device PNP0C0F:1b to driver pci_link
bus: 'acpi': driver_probe_device: matched device PNP0C0F:1c with driver pci_link
bus: 'acpi': really_probe: probing driver pci_link with device PNP0C0F:1c
ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22) *0
driver: 'PNP0C0F:1c': driver_bound: bound to device 'pci_link'
bus: 'acpi': really_probe: bound device PNP0C0F:1c to driver pci_link
bus: 'acpi': driver_probe_device: matched device PNP0C0F:1d with driver pci_link
bus: 'acpi': really_probe: probing driver pci_link with device PNP0C0F:1d
ACPI: PCI Interrupt Link [APCM] (IRQs 20 21 22) *0, disabled.
driver: 'PNP0C0F:1d': driver_bound: bound to device 'pci_link'
bus: 'acpi': really_probe: bound device PNP0C0F:1d to driver pci_link
bus: 'acpi': driver_probe_device: matched device PNP0C0F:1e with driver pci_link
bus: 'acpi': really_probe: probing driver pci_link with device PNP0C0F:1e
ACPI: PCI Interrupt Link [AP3C] (IRQs 20 21 22) *0, disabled.
driver: 'PNP0C0F:1e': driver_bound: bound to device 'pci_link'
bus: 'acpi': really_probe: bound device PNP0C0F:1e to driver pci_link
bus: 'acpi': driver_probe_device: matched device PNP0C0F:1f with driver pci_link
bus: 'acpi': really_probe: probing driver pci_link with device PNP0C0F:1f
ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22) *0, disabled.
driver: 'PNP0C0F:1f': driver_bound: bound to device 'pci_link'
bus: 'acpi': really_probe: bound device PNP0C0F:1f to driver pci_link
bus: 'acpi': add driver power
bus: 'pnp': registered
device class 'misc': registering
device class 'scsi_host': registering
bus: 'scsi': registered
device class 'scsi_device': registering
SCSI subsystem initialized
libata version 3.00 loaded.
bus: 'usb': registered
device class 'usb_host': registering
bus: 'usb': add driver usbfs
usbcore: registered new interface driver usbfs
bus: 'usb': add driver hub
usbcore: registered new interface driver hub
bus: 'usb': add driver usb
usbcore: registered new device driver usb
bus: 'serio': registered
device class 'input': registering
device class 'rtc': registering
device class 'hwmon': registering
device class 'thermal': registering
PCI: Using ACPI for IRQ routing
device class 'net': registering
device: 'lo': device_add
pnp: PnP ACPI init
device: 'pnp0': device_add
ACPI: bus type pnp registered
device: '00:00': device_add
bus: 'pnp': add device 00:00
device: '00:01': device_add
bus: 'pnp': add device 00:01
device: '00:02': device_add
bus: 'pnp': add device 00:02
device: '00:03': device_add
bus: 'pnp': add device 00:03
device: '00:04': device_add
bus: 'pnp': add device 00:04
device: '00:05': device_add
bus: 'pnp': add device 00:05
device: '00:06': device_add
bus: 'pnp': add device 00:06
device: '00:07': device_add
bus: 'pnp': add device 00:07
device: '00:08': device_add
bus: 'pnp': add device 00:08
device: '00:09': device_add
bus: 'pnp': add device 00:09
device: '00:0a': device_add
bus: 'pnp': add device 00:0a
device: '00:0b': device_add
bus: 'pnp': add device 00:0b
pnp: PnP ACPI: found 12 devices
ACPI: ACPI bus type pnp unregistered
bus: 'pnp': add driver system
bus: 'pnp': driver_probe_device: matched device 00:00 with driver system
bus: 'pnp': really_probe: probing driver system with device 00:00
system 00:00: ioport range 0x4000-0x407f has been reserved
system 00:00: ioport range 0x4080-0x40ff has been reserved
system 00:00: ioport range 0x4400-0x447f has been reserved
system 00:00: ioport range 0x4480-0x44ff has been reserved
system 00:00: ioport range 0x4200-0x427f has been reserved
system 00:00: ioport range 0x4280-0x42ff has been reserved
driver: '00:00': driver_bound: bound to device 'system'
bus: 'pnp': really_probe: bound device 00:00 to driver system
bus: 'pnp': driver_probe_device: matched device 00:01 with driver system
bus: 'pnp': really_probe: probing driver system with device 00:01
system 00:01: ioport range 0x5000-0x503f has been reserved
system 00:01: ioport range 0x5100-0x513f has been reserved
driver: '00:01': driver_bound: bound to device 'system'
bus: 'pnp': really_probe: bound device 00:01 to driver system
bus: 'pnp': driver_probe_device: matched device 00:02 with driver system
bus: 'pnp': really_probe: probing driver system with device 00:02
system 00:02: iomem range 0xdb800-0xdbfff has been reserved
system 00:02: iomem range 0xf0000-0xf7fff could not be reserved
system 00:02: iomem range 0xf8000-0xfbfff could not be reserved
system 00:02: iomem range 0xfc000-0xfffff could not be reserved
system 00:02: iomem range 0x5fff0000-0x5fffffff could not be reserved
system 00:02: iomem range 0xffff0000-0xffffffff has been reserved
system 00:02: iomem range 0x0-0x9ffff could not be reserved
system 00:02: iomem range 0x100000-0x5ffeffff could not be reserved
system 00:02: iomem range 0xfec00000-0xfec00fff has been reserved
system 00:02: iomem range 0xfee00000-0xfee00fff has been reserved
driver: '00:02': driver_bound: bound to device 'system'
bus: 'pnp': really_probe: bound device 00:02 to driver system
bus: 'pnp': driver_probe_device: matched device 00:04 with driver system
bus: 'pnp': really_probe: probing driver system with device 00:04
system 00:04: ioport range 0xb78-0xb7b has been reserved
system 00:04: ioport range 0xf78-0xf7b has been reserved
system 00:04: ioport range 0xa78-0xa7b has been reserved
system 00:04: ioport range 0xe78-0xe7b has been reserved
system 00:04: ioport range 0xbbc-0xbbf has been reserved
system 00:04: ioport range 0xfbc-0xfbf has been reserved
system 00:04: ioport range 0x4d0-0x4d1 has been reserved
system 00:04: ioport range 0x294-0x297 has been reserved
driver: '00:04': driver_bound: bound to device 'system'
bus: 'pnp': really_probe: bound device 00:04 to driver system
device class 'mem': registering
device: 'mem': device_add
device: 'kmem': device_add
device: 'null': device_add
device: 'port': device_add
device: 'zero': device_add
device: 'full': device_add
device: 'random': device_add
device: 'urandom': device_add
device: 'kmsg': device_add
device class 'firmware': registering
pci 0000:00:08.0: PCI bridge, secondary bus 0000:01
pci 0000:00:08.0: IO window: 0xa000-0xcfff
pci 0000:00:08.0: MEM window: 0xec000000-0xedffffff
pci 0000:00:08.0: PREFETCH window: 0x00000070000000-0x000000700fffff
pci 0000:00:1e.0: PCI bridge, secondary bus 0000:02
pci 0000:00:1e.0: IO window: 0xd000-0xdfff
pci 0000:00:1e.0: MEM window: 0xea000000-0xebffffff
pci 0000:00:1e.0: PREFETCH window: 0x000000e0000000-0x000000e7ffffff
pci 0000:00:08.0: setting latency timer to 64
pci_bus 0000:00: resource 0 io: [0x00-0xffff]
pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff]
pci_bus 0000:01: resource 0 io: [0xa000-0xcfff]
pci_bus 0000:01: resource 1 mem: [0xec000000-0xedffffff]
pci_bus 0000:01: resource 2 mem: [0x70000000-0x700fffff]
pci_bus 0000:01: resource 3 mem: [0x0-0x0]
pci_bus 0000:02: resource 0 io: [0xd000-0xdfff]
pci_bus 0000:02: resource 1 mem: [0xea000000-0xebffffff]
pci_bus 0000:02: resource 2 mem: [0xe0000000-0xe7ffffff]
pci_bus 0000:02: resource 3 mem: [0x0-0x0]
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 9, 2621440 bytes)
Switched to NOHz mode on CPU #0
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
NET: Registered protocol family 1
Registering sysdev class 'i8259'
Registering sys device of class 'i8259'
Registering sys device 'i82590'
Registering sysdev class 'i8237'
Registering sys device of class 'i8237'
Registering sys device 'i82370'
Machine check exception polling timer started.
Registering sysdev class 'lapic'
Registering sys device of class 'lapic'
Registering sys device 'lapic0'
Registering sysdev class 'ioapic'
Registering sys device of class 'ioapic'
Registering sys device 'ioapic0'
Registering platform device 'pcspkr'. Parent at platform
device: 'pcspkr': device_add
bus: 'platform': add device pcspkr
Registering sysdev class 'timekeeping'
Registering sys device of class 'timekeeping'
Registering sys device 'timekeeping0'
Registering sysdev class 'clocksource'
Registering sys device of class 'clocksource'
Registering sys device 'clocksource0'
Registering sysdev class 'rttest'
Registering sys device of class 'rttest'
Registering sys device 'rttest0'
Registering sys device of class 'rttest'
Registering sys device 'rttest1'
Registering sys device of class 'rttest'
Registering sys device 'rttest2'
Registering sys device of class 'rttest'
Registering sys device 'rttest3'
Registering sys device of class 'rttest'
Registering sys device 'rttest4'
Registering sys device of class 'rttest'
Registering sys device 'rttest5'
Registering sys device of class 'rttest'
Registering sys device 'rttest6'
Registering sys device of class 'rttest'
Registering sys device 'rttest7'
Initializing RT-Tester: OK
highmem bounce pool size: 64 pages
Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
SGI XFS with security attributes, debug enabled
msgmni has been set to 1726
alg: No test for stdrng (krng)
io scheduler noop registered
io scheduler cfq registered (default)
pci 0000:02:00.0: Boot video device
Registering sysdev class 'irqrouter'
Registering sys device of class 'irqrouter'
Registering sys device 'irqrouter0'
bus: 'acpi': add driver processor
bus: 'acpi': driver_probe_device: matched device ACPI_CPU:00 with driver processor
bus: 'acpi': really_probe: probing driver processor with device ACPI_CPU:00
device: 'cooling_device0': device_add
processor ACPI_CPU:00: registered as cooling_device0
driver: 'ACPI_CPU:00': driver_bound: bound to device 'processor'
bus: 'acpi': really_probe: bound device ACPI_CPU:00 to driver processor
bus: 'acpi': add driver thermal
bus: 'acpi': driver_probe_device: matched device LNXTHERM:00 with driver thermal
bus: 'acpi': really_probe: probing driver thermal with device LNXTHERM:00
bus: 'acpi': driver_probe_device: matched device LNXTHERM:01 with driver thermal
bus: 'acpi': really_probe: probing driver thermal with device LNXTHERM:01
device: 'thermal_zone0': device_add
thermal LNXTHERM:01: registered as thermal_zone0
ACPI: Thermal Zone [THRM] (37 C)
driver: 'LNXTHERM:01': driver_bound: bound to device 'thermal'
bus: 'acpi': really_probe: bound device LNXTHERM:01 to driver thermal
device: 'tty': device_add
device: 'console': device_add
device: 'tty0': device_add
device class 'vc': registering
device: 'vcs': device_add
device: 'vcsa': device_add
device: 'tty1': device_add
device: 'tty2': device_add
device: 'tty3': device_add
device: 'tty4': device_add
device: 'tty5': device_add
device: 'tty6': device_add
device: 'tty7': device_add
device: 'tty8': device_add
device: 'tty9': device_add
device: 'tty10': device_add
device: 'tty11': device_add
device: 'tty12': device_add
device: 'tty13': device_add
device: 'tty14': device_add
device: 'tty15': device_add
device: 'tty16': device_add
device: 'tty17': device_add
device: 'tty18': device_add
device: 'tty19': device_add
device: 'tty20': device_add
device: 'tty21': device_add
device: 'tty22': device_add
device: 'tty23': device_add
device: 'tty24': device_add
device: 'tty25': device_add
device: 'tty26': device_add
device: 'tty27': device_add
device: 'tty28': device_add
device: 'tty29': device_add
device: 'tty30': device_add
device: 'tty31': device_add
device: 'tty32': device_add
device: 'tty33': device_add
device: 'tty34': device_add
device: 'tty35': device_add
device: 'tty36': device_add
device: 'tty37': device_add
device: 'tty38': device_add
device: 'tty39': device_add
device: 'tty40': device_add
device: 'tty41': device_add
device: 'tty42': device_add
device: 'tty43': device_add
device: 'tty44': device_add
device: 'tty45': device_add
device: 'tty46': device_add
device: 'tty47': device_add
device: 'tty48': device_add
device: 'tty49': device_add
device: 'tty50': device_add
device: 'tty51': device_add
device: 'tty52': device_add
device: 'tty53': device_add
device: 'tty54': device_add
device: 'tty55': device_add
device: 'tty56': device_add
device: 'tty57': device_add
device: 'tty58': device_add
device: 'tty59': device_add
device: 'tty60': device_add
device: 'tty61': device_add
device: 'tty62': device_add
device: 'tty63': device_add
device: 'ptmx': device_add
device: 'hpet': device_add
bus: 'acpi': add driver hpet
Hangcheck: starting hangcheck timer 0.9.0 (tick is 180 seconds, margin is 60 seconds).
Hangcheck: Using get_cycles().
Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
Registering platform device 'serial8250'. Parent at platform
device: 'serial8250': device_add
bus: 'platform': add device serial8250
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
device: 'ttyS0': device_add
serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
device: 'ttyS1': device_add
device: 'ttyS2': device_add
device: 'ttyS3': device_add
bus: 'platform': add driver serial8250
bus: 'platform': driver_probe_device: matched device serial8250 with driver serial8250
bus: 'platform': really_probe: probing driver serial8250 with device serial8250
driver: 'serial8250': driver_bound: bound to device 'serial8250'
bus: 'platform': really_probe: bound device serial8250 to driver serial8250
bus: 'pnp': add driver serial
bus: 'pnp': driver_probe_device: matched device 00:09 with driver serial
bus: 'pnp': really_probe: probing driver serial with device 00:09
device: 'ttyS0': device_unregister
device: 'ttyS0': device_create_release
00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
device: 'ttyS0': device_add
driver: '00:09': driver_bound: bound to device 'serial'
bus: 'pnp': really_probe: bound device 00:09 to driver serial
bus: 'pnp': driver_probe_device: matched device 00:0a with driver serial
bus: 'pnp': really_probe: probing driver serial with device 00:0a
device: 'ttyS1': device_unregister
device: 'ttyS1': device_create_release
00:0a: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
device: 'ttyS1': device_add
driver: '00:0a': driver_bound: bound to device 'serial'
bus: 'pnp': really_probe: bound device 00:0a to driver serial
bus: 'pci': add driver serial
kgdb: Registered I/O driver kgdbts.
kgdbts:RUN plant and detach test
kgdbts:RUN sw breakpoint test
kgdbts:RUN bad memory access test
kgdbts:RUN singlestep test 1000 iterations
kgdbts:RUN singlestep [0/1000]
kgdbts:RUN singlestep [100/1000]
kgdbts:RUN singlestep [200/1000]
kgdbts:RUN singlestep [300/1000]
kgdbts:RUN singlestep [400/1000]
kgdbts:RUN singlestep [500/1000]
kgdbts:RUN singlestep [600/1000]
kgdbts:RUN singlestep [700/1000]
kgdbts:RUN singlestep [800/1000]
kgdbts:RUN singlestep [900/1000]
kgdbts:RUN hw breakpoint test
kgdbts:RUN hw write breakpoint test
kgdbts:RUN access write breakpoint test
kgdbts:RUN do_fork for 100 breakpoints
khelper used greatest stack depth: 6716 bytes left
device class 'scsi_disk': registering
Driver 'sd' needs updating - please use bus_type methods
bus: 'scsi': add driver sd
device class 'scsi_generic': registering
bus: 'pci': add driver sata_sil
bus: 'pci': add driver pata_amd
bus: 'pci': driver_probe_device: matched device 0000:00:09.0 with driver pata_amd
bus: 'pci': really_probe: probing driver pata_amd with device 0000:00:09.0
pata_amd 0000:00:09.0: version 0.4.1
pata_amd 0000:00:09.0: setting latency timer to 64
scsi0 : pata_amd
device: 'host0': device_add
bus: 'scsi': add device host0
device: 'host0': device_add
scsi1 : pata_amd
device: 'host1': device_add
bus: 'scsi': add device host1
device: 'host1': device_add
ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xf000 irq 14
ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xf008 irq 15
driver: '0000:00:09.0': driver_bound: bound to device 'pata_amd'
bus: 'pci': really_probe: bound device 0000:00:09.0 to driver pata_amd
bus: 'pci': add driver pata_pdc2027x
bus: 'pci': driver_probe_device: matched device 0000:01:08.0 with driver pata_pdc2027x
bus: 'pci': really_probe: probing driver pata_pdc2027x with device 0000:01:08.0
pata_pdc2027x 0000:01:08.0: version 1.0
ACPI: PCI Interrupt Link [APC1] enabled at IRQ 16
pata_pdc2027x 0000:01:08.0: PCI INT A -> Link[APC1] -> GSI 16 (level, high) -> IRQ 16
pata_pdc2027x 0000:01:08.0: PLL input clock 16691 kHz
scsi2 : pata_pdc2027x
device: 'host2': device_add
bus: 'scsi': add device host2
device: 'host2': device_add
scsi3 : pata_pdc2027x
device: 'host3': device_add
bus: 'scsi': add device host3
device: 'host3': device_add
ata3: PATA max UDMA/100 mmio m65536@0xed040000 cmd 0xed0417c0 irq 16
ata4: PATA max UDMA/100 mmio m65536@0xed040000 cmd 0xed0415c0 irq 16
driver: '0000:01:08.0': driver_bound: bound to device 'pata_pdc2027x'
bus: 'pci': really_probe: bound device 0000:01:08.0 to driver pata_pdc2027x
Intel(R) PRO/1000 Network Driver - version 7.3.21-k3-NAPI
Copyright (c) 1999-2006 Intel Corporation.
bus: 'pci': add driver e1000
bus: 'pci': driver_probe_device: matched device 0000:01:0a.0 with driver e1000
bus: 'pci': really_probe: probing driver e1000 with device 0000:01:0a.0
ACPI: PCI Interrupt Link [APC3] enabled at IRQ 18
e1000 0000:01:0a.0: PCI INT A -> Link[APC3] -> GSI 18 (level, high) -> IRQ 18
e1000: 0000:01:0a.0: e1000_probe: (PCI:33MHz:32-bit) 00:07:e9:09:d4:79
ata1.00: ATA-7: ST3250823A, 3.02, max UDMA/100
ata1.00: 488397168 sectors, multi 16: LBA48
ata3.00: ATA-7: ST3250823A, 3.03, max UDMA/100
ata3.00: 488397168 sectors, multi 16: LBA48
ata1: nv_mode_filter: 0x3f39f&0x3f01f->0x3f01f, BIOS=0x3f000 (0xc600c600) ACPI=0x3f01f (20:600:0x13)
device: 'eth0': device_add
e1000: eth0: e1000_probe: Intel(R) PRO/1000 Network Connection
driver: '0000:01:0a.0': driver_bound: bound to device 'e1000'
bus: 'pci': really_probe: bound device 0000:01:0a.0 to driver e1000
bus: 'pci': add driver forcedeth
bus: 'pci': driver_probe_device: matched device 0000:00:04.0 with driver forcedeth
bus: 'pci': really_probe: probing driver forcedeth with device 0000:00:04.0
forcedeth: Reverse Engineered nForce ethernet driver. Version 0.64.
ACPI: PCI Interrupt Link [APCH] enabled at IRQ 22
forcedeth 0000:00:04.0: PCI INT A -> Link[APCH] -> GSI 22 (level, high) -> IRQ 22
forcedeth 0000:00:04.0: setting latency timer to 64
nv_probe: set workaround bit for reversed mac addr
ata3.00: configured for UDMA/100
ata1.00: configured for UDMA/100
scsi 0:0:0:0: Direct-Access ATA ST3250823A 3.02 PQ: 0 ANSI: 5
device: 'target0:0:0': device_add
bus: 'scsi': add device target0:0:0
device: '0:0:0:0': device_add
bus: 'scsi': add device 0:0:0:0
bus: 'scsi': driver_probe_device: matched device 0:0:0:0 with driver sd
bus: 'scsi': really_probe: probing driver sd with device 0:0:0:0
driver: '0:0:0:0': driver_bound: bound to device 'sd'
bus: 'scsi': really_probe: bound device 0:0:0:0 to driver sd
device: '0:0:0:0': device_add
device: 'sg0': device_add
sd 0:0:0:0: Attached scsi generic sg0 type 0
device: '0:0:0:0': device_add
sd 0:0:0:0: [sda] 488397168 512-byte hardware sectors: (250 GB/232 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
device: 'sda': device_add
sda: sda1 sda2 sda3
device: 'sda1': device_add
device: 'sda2': device_add
device: 'sda3': device_add
device: '8:0': device_add
sd 0:0:0:0: [sda] Attached SCSI disk
ata2.00: ATA-7: ST3250824A, 3.AAD, max UDMA/100
ata2.00: 488397168 sectors, multi 16: LBA48
ata2: nv_mode_filter: 0x3f39f&0x3f01f->0x3f01f, BIOS=0x3f000 (0xc600c600) ACPI=0x3f01f (20:600:0x13)
ata2.00: configured for UDMA/100
scsi 1:0:0:0: Direct-Access ATA ST3250824A 3.AA PQ: 0 ANSI: 5
device: 'target1:0:0': device_add
bus: 'scsi': add device target1:0:0
device: '1:0:0:0': device_add
bus: 'scsi': add device 1:0:0:0
bus: 'scsi': driver_probe_device: matched device 1:0:0:0 with driver sd
bus: 'scsi': really_probe: probing driver sd with device 1:0:0:0
device: '1:0:0:0': device_add
sd 1:0:0:0: [sdb] 488397168 512-byte hardware sectors: (250 GB/232 GiB)
sd 1:0:0:0: [sdb] Write Protect is off
sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
device: 'sdb': device_add
sdb:<7>driver: '1:0:0:0': driver_bound: bound to device 'sd'
bus: 'scsi': really_probe: bound device 1:0:0:0 to driver sd
device: '1:0:0:0': device_add
device: 'sg1': device_add
sdb1
device: 'sdb1': device_add
device: '8:16': device_add
sd 1:0:0:0: [sdb] Attached SCSI disk
sd 1:0:0:0: Attached scsi generic sg1 type 0
scsi 2:0:0:0: Direct-Access ATA ST3250823A 3.03 PQ: 0 ANSI: 5
device: 'target2:0:0': device_add
bus: 'scsi': add device target2:0:0
device: '2:0:0:0': device_add
bus: 'scsi': add device 2:0:0:0
bus: 'scsi': driver_probe_device: matched device 2:0:0:0 with driver sd
bus: 'scsi': really_probe: probing driver sd with device 2:0:0:0
device: '2:0:0:0': device_add
sd 2:0:0:0: [sdc] 488397168 512-byte hardware sectors: (250 GB/232 GiB)
sd 2:0:0:0: [sdc] Write Protect is off
sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00
sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
device: 'sdc': device_add
sdc:<7>driver: '2:0:0:0': driver_bound: bound to device 'sd'
bus: 'scsi': really_probe: bound device 2:0:0:0 to driver sd
device: '2:0:0:0': device_add
device: 'sg2': device_add
sd 2:0:0:0: Attached scsi generic sg2 type 0
sdc1
device: 'sdc1': device_add
device: '8:32': device_add
sd 2:0:0:0: [sdc] Attached SCSI disk
device: 'eth1': device_add
forcedeth 0000:00:04.0: ifname eth1, PHY OUI 0x732 @ 1, addr 00:50:8d:f5:11:16
forcedeth 0000:00:04.0: timirq lnktim desc-v1
driver: '0000:00:04.0': driver_bound: bound to device 'forcedeth'
bus: 'pci': really_probe: bound device 0000:00:04.0 to driver forcedeth
netconsole: local port 6665
netconsole: local IP 192.168.99.1
netconsole: interface eth0
netconsole: remote port 6666
netconsole: remote IP 192.168.99.2
netconsole: remote ethernet address 00:1d:7d:d1:c3:69
netconsole: device eth0 not up yet, forcing it
e1000: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX
async/4 used greatest stack depth: 6544 bytes left
async/1 used greatest stack depth: 6240 bytes left
ata4.00: HPA detected: current 488395055, native 488397168
ata4.00: ATA-7: ST3250824A, 3.AAD, max UDMA/100
ata4.00: 488395055 sectors, multi 16: LBA48
kgdb: Unregistered I/O driver kgdbts, debugger disabled.
console [netcon0] enabled
Clocksource tsc unstable (delta = 4686534172 ns)
netconsole: network logging started
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci_hcd: block sizes: qh 128 qtd 96 itd 160 sitd 96
bus: 'pci': add driver ehci_hcd
bus: 'pci': driver_probe_device: matched device 0000:00:02.2 with driver ehci_hcd
bus: 'pci': really_probe: probing driver ehci_hcd with device 0000:00:02.2
ACPI: PCI Interrupt Link [APCL] enabled at IRQ 21
ehci_hcd 0000:00:02.2: PCI INT C -> Link[APCL] -> GSI 21 (level, high) -> IRQ 21
ehci_hcd 0000:00:02.2: setting latency timer to 64
ehci_hcd 0000:00:02.2: EHCI Host Controller
device: 'usb_host1': device_add
drivers/usb/core/inode.c: creating file 'devices'
drivers/usb/core/inode.c: creating file '001'
ehci_hcd 0000:00:02.2: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:02.2: reset hcs_params 0x102486 dbg=1 cc=2 pcc=4 !ppc ports=6
ehci_hcd 0000:00:02.2: reset portroute 0 0 1 1 1 0
ehci_hcd 0000:00:02.2: reset hcc_params a082 caching frame 256/512/1024
ehci_hcd 0000:00:02.2: reset command 080002 (park)=0 ithresh=8 period=1024 Reset HALT
ehci_hcd 0000:00:02.2: debug port 1
ehci_hcd 0000:00:02.2: cache line size of 64 is not supported
ehci_hcd 0000:00:02.2: supports USB remote wakeup
ehci_hcd 0000:00:02.2: irq 21, io mem 0xee004000
ehci_hcd 0000:00:02.2: reset command 080002 (park)=0 ithresh=8 period=1024 Reset HALT
ehci_hcd 0000:00:02.2: init command 010009 (park)=0 ithresh=1 period=256 RUN
ata4.00: configured for UDMA/100
scsi 3:0:0:0: Direct-Access ATA ST3250824A 3.AA PQ: 0 ANSI: 5
device: 'target3:0:0': device_add
bus: 'scsi': add device target3:0:0
device: '3:0:0:0': device_add
bus: 'scsi': add device 3:0:0:0
bus: 'scsi': driver_probe_device: matched device 3:0:0:0 with driver sd
bus: 'scsi': really_probe: probing driver sd with device 3:0:0:0
driver: '3:0:0:0': driver_bound: bound to device 'sd'
bus: 'scsi': really_probe: bound device 3:0:0:0 to driver sd
device: '3:0:0:0': device_add
device: 'sg3': device_add
sd 3:0:0:0: Attached scsi generic sg3 type 0
device: '3:0:0:0': device_add
sd 3:0:0:0: [sdd] 488395055 512-byte hardware sectors: (250 GB/232 GiB)
sd 3:0:0:0: [sdd] Write Protect is off
sd 3:0:0:0: [sdd] Mode Sense: 00 3a 00 00
sd 3:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
device: 'sdd': device_add
sdd:<6>ehci_hcd 0000:00:02.2: USB 2.0 started, EHCI 1.00
usb usb1: default language 0x0409
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 2.6.29-05093-gc31f403-dirty ehci_hcd
usb usb1: SerialNumber: 0000:00:02.2
device: 'usb1': device_add
bus: 'usb': add device usb1
usb usb1: uevent
bus: 'usb': driver_probe_device: matched device usb1 with driver usb
bus: 'usb': really_probe: probing driver usb with device usb1
usb usb1: usb_probe_device
usb usb1: configuration #1 chosen from 1 choice
usb usb1: adding 1-0:1.0 (config #1, interface 0)
device: '1-0:1.0': device_add
bus: 'usb': add device 1-0:1.0
usb 1-0:1.0: uevent
bus: 'usb': driver_probe_device: matched device 1-0:1.0 with driver hub
bus: 'usb': really_probe: probing driver hub with device 1-0:1.0
hub 1-0:1.0: usb_probe_interface
hub 1-0:1.0: usb_probe_interface - got id
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 6 ports detected
hub 1-0:1.0: standalone hub
hub 1-0:1.0: no power switching (usb 1.0)
hub 1-0:1.0: individual port over-current protection
hub 1-0:1.0: power on to power good time: 20ms
hub 1-0:1.0: local power source is good
hub 1-0:1.0: trying to enable port power on non-switchable hub
driver: '1-0:1.0': driver_bound: bound to device 'hub'
bus: 'usb': really_probe: bound device 1-0:1.0 to driver hub
device class 'usb_endpoint': registering
device: 'usbdev1.1_ep81': device_add
drivers/usb/core/inode.c: creating file '001'
driver: 'usb1': driver_bound: bound to device 'usb'
bus: 'usb': really_probe: bound device usb1 to driver usb
device: 'usbdev1.1_ep00': device_add
driver: '0000:00:02.2': driver_bound: bound to device 'ehci_hcd'
bus: 'pci': really_probe: bound device 0000:00:02.2 to driver ehci_hcd
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci_hcd: block sizes: ed 64 td 64
bus: 'pci': add driver ohci_hcd
bus: 'pci': driver_probe_device: matched device 0000:00:02.0 with driver ohci_hcd
bus: 'pci': really_probe: probing driver ohci_hcd with device 0000:00:02.0
ACPI: PCI Interrupt Link [APCF] enabled at IRQ 20
ohci_hcd 0000:00:02.0: PCI INT A -> Link[APCF] -> GSI 20 (level, high) -> IRQ 20
ohci_hcd 0000:00:02.0: setting latency timer to 64
ohci_hcd 0000:00:02.0: OHCI Host Controller
device: 'usb_host2': device_add
drivers/usb/core/inode.c: creating file '002'
ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 2
ohci_hcd 0000:00:02.0: created debug files
ohci_hcd 0000:00:02.0: supports USB remote wakeup
ohci_hcd 0000:00:02.0: irq 20, io mem 0xee002000
hub 1-0:1.0: state 7 ports 6 chg 0000 evt 0000
sdd1
device: 'sdd1': device_add
device: '8:48': device_add
sd 3:0:0:0: [sdd] Attached SCSI disk
ohci_hcd 0000:00:02.0: OHCI controller state
ohci_hcd 0000:00:02.0: OHCI 1.0, NO legacy support registers
ohci_hcd 0000:00:02.0: control 0x683 RWE RWC HCFS=operational CBSR=3
ohci_hcd 0000:00:02.0: cmdstatus 0x00000 SOC=0
ohci_hcd 0000:00:02.0: intrstatus 0x00000004 SF
ohci_hcd 0000:00:02.0: intrenable 0x8000004a MIE RHSC RD WDH
ohci_hcd 0000:00:02.0: hcca frame #0028
ohci_hcd 0000:00:02.0: roothub.a 01000203 POTPGT=1 NPS NDP=3(3)
ohci_hcd 0000:00:02.0: roothub.b 00000000 PPCM=0000 DR=0000
ohci_hcd 0000:00:02.0: roothub.status 00008000 DRWE
ohci_hcd 0000:00:02.0: roothub.portstatus [0] 0x00000100 PPS
ohci_hcd 0000:00:02.0: roothub.portstatus [1] 0x00000100 PPS
ohci_hcd 0000:00:02.0: roothub.portstatus [2] 0x00000100 PPS
usb usb2: default language 0x0409
usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: OHCI Host Controller
usb usb2: Manufacturer: Linux 2.6.29-05093-gc31f403-dirty ohci_hcd
usb usb2: SerialNumber: 0000:00:02.0
device: 'usb2': device_add
bus: 'usb': add device usb2
usb usb2: uevent
bus: 'usb': driver_probe_device: matched device usb2 with driver usb
bus: 'usb': really_probe: probing driver usb with device usb2
usb usb2: usb_probe_device
usb usb2: configuration #1 chosen from 1 choice
usb usb2: adding 2-0:1.0 (config #1, interface 0)
device: '2-0:1.0': device_add
bus: 'usb': add device 2-0:1.0
usb 2-0:1.0: uevent
bus: 'usb': driver_probe_device: matched device 2-0:1.0 with driver hub
bus: 'usb': really_probe: probing driver hub with device 2-0:1.0
hub 2-0:1.0: usb_probe_interface
hub 2-0:1.0: usb_probe_interface - got id
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 3 ports detected
hub 2-0:1.0: standalone hub
hub 2-0:1.0: no power switching (usb 1.0)
hub 2-0:1.0: global over-current protection
hub 2-0:1.0: power on to power good time: 2ms
hub 2-0:1.0: local power source is good
hub 2-0:1.0: no over-current condition exists
hub 2-0:1.0: trying to enable port power on non-switchable hub
driver: '2-0:1.0': driver_bound: bound to device 'hub'
bus: 'usb': really_probe: bound device 2-0:1.0 to driver hub
device: 'usbdev2.1_ep81': device_add
drivers/usb/core/inode.c: creating file '001'
driver: 'usb2': driver_bound: bound to device 'usb'
bus: 'usb': really_probe: bound device usb2 to driver usb
device: 'usbdev2.1_ep00': device_add
driver: '0000:00:02.0': driver_bound: bound to device 'ohci_hcd'
bus: 'pci': really_probe: bound device 0000:00:02.0 to driver ohci_hcd
bus: 'pci': driver_probe_device: matched device 0000:00:02.1 with driver ohci_hcd
bus: 'pci': really_probe: probing driver ohci_hcd with device 0000:00:02.1
ACPI: PCI Interrupt Link [APCG] enabled at IRQ 22
ohci_hcd 0000:00:02.1: PCI INT B -> Link[APCG] -> GSI 22 (level, high) -> IRQ 22
ohci_hcd 0000:00:02.1: setting latency timer to 64
ohci_hcd 0000:00:02.1: OHCI Host Controller
device: 'usb_host3': device_add
drivers/usb/core/inode.c: creating file '003'
ohci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 3
ohci_hcd 0000:00:02.1: created debug files
ohci_hcd 0000:00:02.1: supports USB remote wakeup
ohci_hcd 0000:00:02.1: irq 22, io mem 0xee003000
hub 2-0:1.0: state 7 ports 3 chg 0000 evt 0000
ohci_hcd 0000:00:02.1: OHCI controller state
ohci_hcd 0000:00:02.1: OHCI 1.0, NO legacy support registers
ohci_hcd 0000:00:02.1: control 0x683 RWE RWC HCFS=operational CBSR=3
ohci_hcd 0000:00:02.1: cmdstatus 0x00000 SOC=0
ohci_hcd 0000:00:02.1: intrstatus 0x00000004 SF
ohci_hcd 0000:00:02.1: intrenable 0x8000004a MIE RHSC RD WDH
ohci_hcd 0000:00:02.1: hcca frame #0028
ohci_hcd 0000:00:02.1: roothub.a 01000203 POTPGT=1 NPS NDP=3(3)
ohci_hcd 0000:00:02.1: roothub.b 00000000 PPCM=0000 DR=0000
ohci_hcd 0000:00:02.1: roothub.status 00008000 DRWE
ohci_hcd 0000:00:02.1: roothub.portstatus [0] 0x00000100 PPS
ohci_hcd 0000:00:02.1: roothub.portstatus [1] 0x00000100 PPS
ohci_hcd 0000:00:02.1: roothub.portstatus [2] 0x00000100 PPS
usb usb3: default language 0x0409
usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: OHCI Host Controller
usb usb3: Manufacturer: Linux 2.6.29-05093-gc31f403-dirty ohci_hcd
usb usb3: SerialNumber: 0000:00:02.1
device: 'usb3': device_add
bus: 'usb': add device usb3
usb usb3: uevent
bus: 'usb': driver_probe_device: matched device usb3 with driver usb
bus: 'usb': really_probe: probing driver usb with device usb3
usb usb3: usb_probe_device
usb usb3: configuration #1 chosen from 1 choice
usb usb3: adding 3-0:1.0 (config #1, interface 0)
device: '3-0:1.0': device_add
bus: 'usb': add device 3-0:1.0
usb 3-0:1.0: uevent
bus: 'usb': driver_probe_device: matched device 3-0:1.0 with driver hub
bus: 'usb': really_probe: probing driver hub with device 3-0:1.0
hub 3-0:1.0: usb_probe_interface
hub 3-0:1.0: usb_probe_interface - got id
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 3 ports detected
hub 3-0:1.0: standalone hub
hub 3-0:1.0: no power switching (usb 1.0)
hub 3-0:1.0: global over-current protection
hub 3-0:1.0: power on to power good time: 2ms
hub 3-0:1.0: local power source is good
hub 3-0:1.0: no over-current condition exists
hub 3-0:1.0: trying to enable port power on non-switchable hub
driver: '3-0:1.0': driver_bound: bound to device 'hub'
bus: 'usb': really_probe: bound device 3-0:1.0 to driver hub
device: 'usbdev3.1_ep81': device_add
drivers/usb/core/inode.c: creating file '001'
driver: 'usb3': driver_bound: bound to device 'usb'
bus: 'usb': really_probe: bound device usb3 to driver usb
device: 'usbdev3.1_ep00': device_add
driver: '0000:00:02.1': driver_bound: bound to device 'ohci_hcd'
bus: 'pci': really_probe: bound device 0000:00:02.1 to driver ohci_hcd
bus: 'usb': add driver usblp
usbcore: registered new interface driver usblp
bus: 'pnp': add driver i8042 kbd
bus: 'pnp': driver_probe_device: matched device 00:0b with driver i8042 kbd
bus: 'pnp': really_probe: probing driver i8042 kbd with device 00:0b
driver: '00:0b': driver_bound: bound to device 'i8042 kbd'
bus: 'pnp': really_probe: bound device 00:0b to driver i8042 kbd
bus: 'pnp': add driver i8042 aux
PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
bus: 'platform': add driver i8042
Registering platform device 'i8042'. Parent at platform
device: 'i8042': device_add
bus: 'platform': add device i8042
bus: 'platform': driver_probe_device: matched device i8042 with driver i8042
bus: 'platform': really_probe: probing driver i8042 with device i8042
serio: i8042 KBD port at 0x60,0x64 irq 1
driver: 'i8042': driver_bound: bound to device 'i8042'
bus: 'platform': really_probe: bound device i8042 to driver i8042
device: 'mice': device_add
device: 'psaux': device_add
mice: PS/2 mouse device common for all mice
bus: 'serio': add driver atkbd
bus: 'pnp': add driver rtc_cmos
bus: 'pnp': driver_probe_device: matched device 00:06 with driver rtc_cmos
bus: 'pnp': really_probe: probing driver rtc_cmos with device 00:06
rtc_cmos 00:06: RTC can wake from S4
device: 'rtc0': device_add
rtc_cmos: dev (254:0)
rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one year, y3k, 242 bytes nvram
driver: '00:06': driver_bound: bound to device 'rtc_cmos'
bus: 'pnp': really_probe: bound device 00:06 to driver rtc_cmos
cpuidle: using governor ladder
cpuidle: using governor menu
TCP cubic registered
NET: Registered protocol family 17
hub 3-0:1.0: state 7 ports 3 chg 0000 evt 0000
device: 'serio0': device_add
bus: 'serio': add device serio0
bus: 'serio': driver_probe_device: matched device serio0 with driver atkbd
bus: 'serio': really_probe: probing driver atkbd with device serio0
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
Using IPI Shortcut mode
device: 'cpu_dma_latency': device_add
device: 'network_latency': device_add
device: 'network_throughput': device_add
rtc_cmos 00:06: setting system clock to 2009-03-29 20:37:09 UTC (1238359029)
device: 'input0': device_add
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
driver: 'serio0': driver_bound: bound to device 'atkbd'
bus: 'serio': really_probe: bound device serio0 to driver atkbd
ReiserFS: sda1: found reiserfs format "3.6" with standard journal
ReiserFS: sda1: using ordered data mode
ReiserFS: sda1: journal params: device sda1, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
ReiserFS: sda1: checking transaction log (sda1)
ReiserFS: sda1: journal-1153: found in header: first_unflushed_offset 5683, last_flushed_trans_id 1470853
ReiserFS: sda1: journal-1206: Starting replay from offset 6317269827196467, trans_id 1024
ReiserFS: sda1: journal-1299: Setting newest_mount_id to 174
ReiserFS: sda1: Using r5 hash to sort names
VFS: Mounted root (reiserfs filesystem) readonly on device 8:1.
debug: unmapping init memory c06e8000..c0729000
ohci_hcd 0000:00:02.0: auto-stop root hub
ohci_hcd 0000:00:02.1: auto-stop root hub
init-early.sh used greatest stack depth: 5124 bytes left
udev: starting version 140
device: 'device:00': dev_uevent: bus uevent() returned -12
device: 'device:01': dev_uevent: bus uevent() returned -12
device: 'device:02': dev_uevent: bus uevent() returned -12
device: 'device:03': dev_uevent: bus uevent() returned -12
device: 'device:04': dev_uevent: bus uevent() returned -12
device: 'device:05': dev_uevent: bus uevent() returned -12
device: 'device:06': dev_uevent: bus uevent() returned -12
device: 'device:07': dev_uevent: bus uevent() returned -12
device: 'device:08': dev_uevent: bus uevent() returned -12
device: 'device:09': dev_uevent: bus uevent() returned -12
device: 'device:0a': dev_uevent: bus uevent() returned -12
device: 'device:0b': dev_uevent: bus uevent() returned -12
device: 'device:0c': dev_uevent: bus uevent() returned -12
device: 'device:0d': dev_uevent: bus uevent() returned -12
device: 'device:0e': dev_uevent: bus uevent() returned -12
device: 'device:0f': dev_uevent: bus uevent() returned -12
device: 'device:10': dev_uevent: bus uevent() returned -12
device: 'device:11': dev_uevent: bus uevent() returned -12
device: 'device:12': dev_uevent: bus uevent() returned -12
device: 'device:13': dev_uevent: bus uevent() returned -12
device: 'device:14': dev_uevent: bus uevent() returned -12
device: 'device:15': dev_uevent: bus uevent() returned -12
usb usb2: uevent
usb 2-0:1.0: uevent
usb usb3: uevent
usb 3-0:1.0: uevent
usb usb1: uevent
usb 1-0:1.0: uevent
bus: 'pci': add driver nForce2_smbus
bus: 'pci': driver_probe_device: matched device 0000:00:01.1 with driver nForce2_smbus
bus: 'pci': really_probe: probing driver nForce2_smbus with device 0000:00:01.1
device: 'i2c-0': device_add
i2c-adapter i2c-0: nForce2 SMBus adapter at 0x5000
device: 'i2c-1': device_add
i2c-adapter i2c-1: nForce2 SMBus adapter at 0x5100
driver: '0000:00:01.1': driver_bound: bound to device 'nForce2_smbus'
bus: 'pci': really_probe: bound device 0000:00:01.1 to driver nForce2_smbus
fsck.reiserfs used greatest stack depth: 4984 bytes left
XFS mounting filesystem sda3
Ending clean XFS mount for filesystem: sda3
XFS mounting filesystem sdb1
Ending clean XFS mount for filesystem: sdb1
XFS mounting filesystem sdd1
Ending clean XFS mount for filesystem: sdd1
XFS mounting filesystem sdc1
Ending clean XFS mount for filesystem: sdc1
device: 'vcs2': device_add
device: 'vcsa2': device_add
device: 'vcs3': device_add
device: 'vcsa3': device_add
device: 'vcs4': device_add
device: 'vcsa4': device_add
device: 'vcs5': device_add
device: 'vcsa5': device_add
device: 'vcs6': device_add
device: 'vcsa6': device_add
device: 'vcs7': device_add
device: 'vcsa7': device_add
device: 'vcs8': device_add
device: 'vcsa8': device_add
device: 'vcs9': device_add
device: 'vcsa9': device_add
device: 'vcs10': device_add
device: 'vcsa10': device_add
device: 'vcs11': device_add
device: 'vcsa11': device_add
device: 'vcs12': device_add
device: 'vcsa12': device_add
cp used greatest stack depth: 4948 bytes left
Adding 498004k swap on /dev/sda2. Priority:-1 extents:1 across:498004k
eth1: no link during initialization.
eth1: link up.
CPA self-test:
4k 227326 large 0 gb 0 x 227326[c0000000-f77fd000] miss 0
4k 227326 large 0 gb 0 x 227326[c0000000-f77fd000] miss 0
4k 227326 large 0 gb 0 x 227326[c0000000-f77fd000] miss 0
ok.
w83627hf: Found W83627HF chip at 0x290
bus: 'platform': add driver w83627hf
ACPI: I/O resource w83627hf [0x295-0x296] conflicts with ACPI region IP__ [0x295-0x296]
ACPI: Device needs an ACPI driver
w83627hf.656: use which platform_data?
Registering platform device 'w83627hf.656'. Parent at platform
device: 'w83627hf.656': device_add
bus: 'platform': add device w83627hf.656
bus: 'platform': driver_probe_device: matched device w83627hf.656 with driver w83627hf
bus: 'platform': really_probe: probing driver w83627hf with device w83627hf.656
device: 'hwmon0': device_add
driver: 'w83627hf.656': driver_bound: bound to device 'w83627hf'
bus: 'platform': really_probe: bound device w83627hf.656 to driver w83627hf
reply other threads:[~2009-03-29 16:54 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=a4423d670903290953w200513a0h69121cbe0249022a@mail.gmail.com \
--to=a.beregalov@gmail.com \
--cc=linux-acpi@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®