From: "Miles Lane" <miles.lane@gmail.com>
To: "Andrew Morton" <akpm@linux-foundation.org>,
LKML <linux-kernel@vger.kernel.org>
Subject: 2.6.25-mm1 -- Is this just my drive dying?
Date: Sat, 19 Apr 2008 01:17:00 -0400 [thread overview]
Message-ID: <a44ae5cd0804182217y1f94cceeq12115c379de7c58a@mail.gmail.com> (raw)
[ 6288.201390] ata1.00: configured for UDMA/100
[ 6288.201428] sd 0:0:0:0: [sda] Result: hostbyte=DID_OK
driverbyte=DRIVER_SENSE,SUGGEST_OK
[ 6288.201435] sd 0:0:0:0: [sda] Sense Key : Medium Error [current] [descriptor]
[ 6288.201445] Descriptor sense data with sense descriptors (in hex):
[ 6288.201449] 72 03 11 04 00 00 00 0c 00 0a 80 00 00 00 00 00
[ 6288.201471] 00 94 45 27
[ 6288.201480] sd 0:0:0:0: [sda] Add. Sense: Unrecovered read error -
auto reallocate failed
[ 6288.201489] end_request: I/O error, dev sda, sector 9717031
[ 6288.201497] Buffer I/O error on device sda1, logical block 1214621
[ 6288.203810] ata1: EH complete
[ 6288.203921] sd 0:0:0:0: [sda] 390721968 512-byte hardware sectors (200050 MB)
[ 6288.203973] sd 0:0:0:0: [sda] Write Protect is off
[ 6288.203979] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 6288.205413] sd 0:0:0:0: [sda] Write cache: enabled, read cache:
enabled, doesn't support DPO or FUA
[ 6288.275427] sd 0:0:0:0: [sda] 390721968 512-byte hardware sectors (200050 MB)
[ 6288.283499] sd 0:0:0:0: [sda] Write Protect is off
[ 6288.283511] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 6288.300123] sd 0:0:0:0: [sda] Write cache: enabled, read cache:
enabled, doesn't support DPO or FUA
[ 6293.184073] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 6293.184084] ata1.00: BMDMA stat 0x65
[ 6293.184093] ata1.00: cmd c8/00:08:27:45:94/00:00:00:00:00/e0 tag 0
dma 4096 in
[ 6293.184096] res 51/40:08:27:45:94/00:00:00:00:00/e0 Emask
0x9 (media error)
[ 6293.184102] ata1.00: status: { DRDY ERR }
[ 6293.184105] ata1.00: error: { UNC }
[ 6293.437665] ata1: nv_mode_filter: 0x3f01f&0x3f01f->0x3f01f,
BIOS=0x3f000 (0xc600c0c0) ACPI=0x3f01f (20:600:0x13)
[ 6293.455826] ata1.00: configured for UDMA/100
[ 6293.456164] ata1: EH complete
[ 6297.565208] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 6297.565220] ata1.00: BMDMA stat 0x65
[ 6297.565230] ata1.00: cmd c8/00:08:27:45:94/00:00:00:00:00/e0 tag 0
dma 4096 in
[ 6297.565232] res 51/40:08:27:45:94/00:00:00:00:00/e0 Emask
0x9 (media error)
[ 6297.565238] ata1.00: status: { DRDY ERR }
[ 6297.565241] ata1.00: error: { UNC }
[ 6297.573427] ata1: nv_mode_filter: 0x3f01f&0x3f01f->0x3f01f,
BIOS=0x3f000 (0xc600c0c0) ACPI=0x3f01f (20:600:0x13)
[ 6297.591539] ata1.00: configured for UDMA/100
[ 6297.592592] ata1: EH complete
[ 6301.177009] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 6301.177021] ata1.00: BMDMA stat 0x65
[ 6301.177031] ata1.00: cmd c8/00:08:27:45:94/00:00:00:00:00/e0 tag 0
dma 4096 in
[ 6301.177033] res 51/40:08:28:45:94/00:00:00:00:00/e0 Emask
0x9 (media error)
[ 6301.177039] ata1.00: status: { DRDY ERR }
[ 6301.177042] ata1.00: error: { UNC }
[ 6301.186274] ata1: nv_mode_filter: 0x3f01f&0x3f01f->0x3f01f,
BIOS=0x3f000 (0xc600c0c0) ACPI=0x3f01f (20:600:0x13)
[ 6301.206197] ata1.00: configured for UDMA/100
[ 6301.206413] ata1: EH complete
[ 6308.750919] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 6308.750930] ata1.00: BMDMA stat 0x65
[ 6308.750939] ata1.00: cmd c8/00:08:27:45:94/00:00:00:00:00/e0 tag 0
dma 4096 in
[ 6308.750942] res 51/40:08:28:45:94/00:00:00:00:00/e0 Emask
0x9 (media error)
[ 6308.750948] ata1.00: status: { DRDY ERR }
[ 6308.750951] ata1.00: error: { UNC }
[ 6308.757809] ata1: nv_mode_filter: 0x3f01f&0x3f01f->0x3f01f,
BIOS=0x3f000 (0xc600c0c0) ACPI=0x3f01f (20:600:0x13)
[ 6308.773842] ata1.00: configured for UDMA/100
[ 6308.774057] ata1: EH complete
[ 6315.576605] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 6315.576616] ata1.00: BMDMA stat 0x65
[ 6315.576627] ata1.00: cmd c8/00:08:27:45:94/00:00:00:00:00/e0 tag 0
dma 4096 in
[ 6315.576629] res 51/40:08:28:45:94/00:00:00:00:00/e0 Emask
0x9 (media error)
[ 6315.576635] ata1.00: status: { DRDY ERR }
[ 6315.576638] ata1.00: error: { UNC }
[ 6315.588519] ata1: nv_mode_filter: 0x3f01f&0x3f01f->0x3f01f,
BIOS=0x3f000 (0xc600c0c0) ACPI=0x3f01f (20:600:0x13)
[ 6315.608523] ata1.00: configured for UDMA/100
[ 6315.608711] ata1: EH complete
[ 6319.857408] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 6319.857420] ata1.00: BMDMA stat 0x65
[ 6319.857429] ata1.00: cmd c8/00:08:27:45:94/00:00:00:00:00/e0 tag 0
dma 4096 in
[ 6319.857432] res 51/40:08:28:45:94/00:00:00:00:00/e0 Emask
0x9 (media error)
[ 6319.857437] ata1.00: status: { DRDY ERR }
[ 6319.857441] ata1.00: error: { UNC }
[ 6319.865305] ata1: nv_mode_filter: 0x3f01f&0x3f01f->0x3f01f,
BIOS=0x3f000 (0xc600c0c0) ACPI=0x3f01f (20:600:0x13)
[ 6319.889939] ata1.00: configured for UDMA/100
[ 6319.889979] sd 0:0:0:0: [sda] Result: hostbyte=DID_OK
driverbyte=DRIVER_SENSE,SUGGEST_OK
[ 6319.889986] sd 0:0:0:0: [sda] Sense Key : Medium Error [current] [descriptor]
[ 6319.889996] Descriptor sense data with sense descriptors (in hex):
[ 6319.890000] 72 03 11 04 00 00 00 0c 00 0a 80 00 00 00 00 00
[ 6319.890023] 00 94 45 28
[ 6319.890031] sd 0:0:0:0: [sda] Add. Sense: Unrecovered read error -
auto reallocate failed
[ 6319.890040] end_request: I/O error, dev sda, sector 9717032
[ 6319.890049] Buffer I/O error on device sda1, logical block 1214621
[ 6319.890108] ata1: EH complete
[ 6319.890220] sd 0:0:0:0: [sda] 390721968 512-byte hardware sectors (200050 MB)
[ 6319.890277] sd 0:0:0:0: [sda] Write Protect is off
[ 6319.890282] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 6319.890380] sd 0:0:0:0: [sda] Write cache: enabled, read cache:
enabled, doesn't support DPO or FUA
[ 6319.890477] sd 0:0:0:0: [sda] 390721968 512-byte hardware sectors (200050 MB)
[ 6319.890529] sd 0:0:0:0: [sda] Write Protect is off
[ 6319.890535] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 6319.890631] sd 0:0:0:0: [sda] Write cache: enabled, read cache:
enabled, doesn't support DPO or FUA
[ 6338.213321] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 6338.213332] ata1.00: BMDMA stat 0x65
[ 6338.213342] ata1.00: cmd c8/00:08:17:02:db/00:00:00:00:00/e0 tag 0
dma 4096 in
[ 6338.213344] res 51/40:08:17:02:db/00:00:00:00:00/e0 Emask
0x9 (media error)
[ 6338.213350] ata1.00: status: { DRDY ERR }
[ 6338.213353] ata1.00: error: { UNC }
[ 6338.222357] ata1: nv_mode_filter: 0x3f01f&0x3f01f->0x3f01f,
BIOS=0x3f000 (0xc600c0c0) ACPI=0x3f01f (20:600:0x13)
next reply other threads:[~2008-04-19 5:17 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-04-19 5:17 Miles Lane [this message]
2008-04-19 5:26 ` Andrew Morton
2008-04-19 7:04 ` Jeff Garzik
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=a44ae5cd0804182217y1f94cceeq12115c379de7c58a@mail.gmail.com \
--to=miles.lane@gmail.com \
--cc=akpm@linux-foundation.org \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®