Re: [PATCH v4] arm64: dts: ti: k3-j721s2: correct pinmux offset for ospi

[Vaishnav Achath <vaishnav.a@ti.com>]

Hi Udit,

On 04/08/23 13:23, Udit Kumar wrote:
> Due to non-addressable regions in J721S2 SOC wkup_pmx was split
> into four regions from wkup_pmx0 to wkup_pmx3.
> 
> Correcting OSPI1 pin mux, which now falls under wkup_pmx1.
> Along with that removing unused pin mux for OSPI-0.
> 
> Fixes: 6bc829ceea41 ("arm64: dts: ti: k3-j721s2: Fix wkup pinmux range")
> 
> Signed-off-by: Udit Kumar <u-kumar1@ti.com>
> ---
> Logs with v4
> https://gist.github.com/uditkumarti/84a18d9c9a62fe0d22ee7c650340b12e
> line 980 and 983 Both flashes are detected
> 
> Logs with original tree
> https://gist.github.com/uditkumarti/41d3d7ccf278d4e00e6da349478e58aa
> (line 1192) pin mux error, line 1209 and 1212 flashes are not detected
> 
> dtbs_check run after applying https://lore.kernel.org/all/20230721082654.27036-1-tony@atomide.com/
> 
> Change log:
> 
> Changes in v4:
>   - Removed unused CS pin mux
>   - Rebased and tested with next-20230804
>   - v3 : https://lore.kernel.org/all/20230803145655.806001-1-u-kumar1@ti.com/
> 
> Changes in v3:
>   - Corrected wkup_pmx for ospi1
>   - Removed unused pin MCU_OSPI1_CSn1, shared with pmic
>   - v2: https://lore.kernel.org/all/20230802113500.162276-1-u-kumar1@ti.com/
> 
> Changes in v2:
>   - Changed name of pin mux to align with
>   https://lore.kernel.org/all/20230721082654.27036-1-tony@atomide.com/ patch
>   - v1: https://lore.kernel.org/all/20230801125626.3287306-1-u-kumar1@ti.com/
> 
>  .../dts/ti/k3-j721s2-common-proc-board.dts    | 19 ++++++++++---------
>  arch/arm64/boot/dts/ti/k3-j721s2-som-p0.dtsi  |  3 ---
>  2 files changed, 10 insertions(+), 12 deletions(-)
> 
> diff --git a/arch/arm64/boot/dts/ti/k3-j721s2-common-proc-board.dts b/arch/arm64/boot/dts/ti/k3-j721s2-common-proc-board.dts
> index 20b32563c0ed..e81ef8a7a8a2 100644
> --- a/arch/arm64/boot/dts/ti/k3-j721s2-common-proc-board.dts
> +++ b/arch/arm64/boot/dts/ti/k3-j721s2-common-proc-board.dts
> @@ -282,18 +282,19 @@ J721S2_WKUP_IOPAD(0x104, PIN_INPUT, 0) /* (N26) MCU_ADC1_AIN6 */
>  			J721S2_WKUP_IOPAD(0x108, PIN_INPUT, 0) /* (N27) MCU_ADC1_AIN7 */
>  		>;
>  	};
> +};
>  
> +&wkup_pmx1 {
>  	mcu_fss0_ospi1_pins_default: mcu-fss0-ospi1-default-pins {
>  		pinctrl-single,pins = <
> -			J721S2_WKUP_IOPAD(0x040, PIN_OUTPUT, 0) /* (A19) MCU_OSPI1_CLK */
> -			J721S2_WKUP_IOPAD(0x05c, PIN_OUTPUT, 0) /* (D20) MCU_OSPI1_CSn0 */
> -			J721S2_WKUP_IOPAD(0x060, PIN_OUTPUT, 0) /* (C21) MCU_OSPI1_CSn1 */
> -			J721S2_WKUP_IOPAD(0x04c, PIN_INPUT, 0) /* (D21) MCU_OSPI1_D0 */
> -			J721S2_WKUP_IOPAD(0x050, PIN_INPUT, 0) /* (G20) MCU_OSPI1_D1 */
> -			J721S2_WKUP_IOPAD(0x054, PIN_INPUT, 0) /* (C20) MCU_OSPI1_D2 */
> -			J721S2_WKUP_IOPAD(0x058, PIN_INPUT, 0) /* (A20) MCU_OSPI1_D3 */
> -			J721S2_WKUP_IOPAD(0x048, PIN_INPUT, 0) /* (B19) MCU_OSPI1_DQS */
> -			J721S2_WKUP_IOPAD(0x044, PIN_INPUT, 0) /* (B20) MCU_OSPI1_LBCLKO */
> +			J721S2_WKUP_IOPAD(0x008, PIN_OUTPUT, 0) /* (A19) MCU_OSPI1_CLK */
> +			J721S2_WKUP_IOPAD(0x024, PIN_OUTPUT, 0) /* (D20) MCU_OSPI1_CSn0 */
> +			J721S2_WKUP_IOPAD(0x014, PIN_INPUT, 0) /* (D21) MCU_OSPI1_D0 */
> +			J721S2_WKUP_IOPAD(0x018, PIN_INPUT, 0) /* (G20) MCU_OSPI1_D1 */
> +			J721S2_WKUP_IOPAD(0x01c, PIN_INPUT, 0) /* (C20) MCU_OSPI1_D2 */
> +			J721S2_WKUP_IOPAD(0x020, PIN_INPUT, 0) /* (A20) MCU_OSPI1_D3 */
> +			J721S2_WKUP_IOPAD(0x010, PIN_INPUT, 0) /* (B19) MCU_OSPI1_DQS */
> +			J721S2_WKUP_IOPAD(0x00c, PIN_INPUT, 0) /* (B20) MCU_OSPI1_LBCLKO */
>  		>;
>  	};
>  };
> diff --git a/arch/arm64/boot/dts/ti/k3-j721s2-som-p0.dtsi b/arch/arm64/boot/dts/ti/k3-j721s2-som-p0.dtsi
> index 594766482071..a4006f328027 100644
> --- a/arch/arm64/boot/dts/ti/k3-j721s2-som-p0.dtsi
> +++ b/arch/arm64/boot/dts/ti/k3-j721s2-som-p0.dtsi
> @@ -56,9 +56,6 @@ mcu_fss0_ospi0_pins_default: mcu-fss0-ospi0-default-pins {
>  		pinctrl-single,pins = <
>  			J721S2_WKUP_IOPAD(0x000, PIN_OUTPUT, 0) /* (D19) MCU_OSPI0_CLK */
>  			J721S2_WKUP_IOPAD(0x02c, PIN_OUTPUT, 0) /* (F15) MCU_OSPI0_CSn0 */
> -			J721S2_WKUP_IOPAD(0x030, PIN_OUTPUT, 0) /* (G17) MCU_OSPI0_CSn1 */
> -			J721S2_WKUP_IOPAD(0x038, PIN_OUTPUT, 0) /* (F14) MCU_OSPI0_CSn2 */
> -			J721S2_WKUP_IOPAD(0x03c, PIN_OUTPUT, 0) /* (F17) MCU_OSPI0_CSn3 */

Thank you for the patch,

Reviewed-by: Vaishnav Achath <vaishnav.a@ti.com>

Thanks and Regards,
Vaishnav
>  			J721S2_WKUP_IOPAD(0x00c, PIN_INPUT, 0) /* (C19) MCU_OSPI0_D0 */
>  			J721S2_WKUP_IOPAD(0x010, PIN_INPUT, 0) /* (F16) MCU_OSPI0_D1 */
>  			J721S2_WKUP_IOPAD(0x014, PIN_INPUT, 0) /* (G15) MCU_OSPI0_D2 */