mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
To: Andy Shevchenko <andriy.shevchenko@linux.intel.com>,
	Arnd Bergmann <arnd@arndb.de>
Cc: alsa-devel@alsa-project.org, Liam Girdwood <lgirdwood@gmail.com>,
	Vinod Koul <vinod.koul@intel.com>,
	Linux Kernel Mailing List <linux-kernel@vger.kernel.org>,
	Takashi Iwai <tiwai@suse.com>,
	Harsha Priya N <harshapriya.n@intel.com>,
	Mark Brown <broonie@kernel.org>, Naveen M <naveen.m@intel.com>,
	Daniel Drake <drake@endlessm.com>
Subject: Re: [alsa-devel] [PATCH] ASoC: intel: clean up CONFIG_SND_SST_IPC handling
Date: Mon, 22 Jan 2018 10:37:28 -0600	[thread overview]
Message-ID: <a463e463-2181-1047-3721-529d8923ad68@linux.intel.com> (raw)
In-Reply-To: <1516621142.7000.1170.camel@linux.intel.com>

On 1/22/18 5:39 AM, Andy Shevchenko wrote:
> On Mon, 2018-01-22 at 11:58 +0100, Arnd Bergmann wrote:
>> On Mon, Jan 22, 2018 at 10:51 AM, Andy Shevchenko
>> <andriy.shevchenko@linux.intel.com> wrote:
>>> On Sun, 2018-01-21 at 23:14 +0100, Arnd Bergmann wrote:
> 
>>>> Slightly later, commit 05f4434bc130 ("ASoC: Intel: remove
>>>> mfld_machine")
>>>> was added, which then removed the Merrifield machine code that
>>>> happened
>>>> to be the only user of SND_SST_ATOM_HIFI2_PLATFORM_PCI. With that
>>>> gone,
>>>
>>> That's what I afraid of. Intel Merrifield *should* be there. What
>>> Vinod
>>> did, AFAIU, is removal of Intel Medfield support, which is fine with
>>> me.
>>>
>>> So, before this can go, we need to get confirmation from Vinod and
>>> Pierre, that Merrifield still stays there.
>>
>> Ok, I see. Checking further, I see that
>> SND_SST_ATOM_HIFI2_PLATFORM_PCI
>> cannot be built without SND_SST_ATOM_HIFI2_PLATFORM:
>>
>> sound/soc/intel/atom/sst/sst_drv_interface.o: In function
>> `sst_register':
>> sst_drv_interface.c:(.text+0xc3e): undefined reference to
>> `sst_register_dsp'
>> sound/soc/intel/atom/sst/sst_drv_interface.o: In function
>> `sst_unregister':
>> sst_drv_interface.c:(.text+0xc67): undefined reference to
>> `sst_unregister_dsp'
> 
> Oh.
> 
>>
>> How about this instead:
>>
>> diff --git a/sound/soc/intel/Kconfig b/sound/soc/intel/Kconfig
>> index f2c9e8c5970a..16344bd24eb0 100644
>> --- a/sound/soc/intel/Kconfig
>> +++ b/sound/soc/intel/Kconfig
>> @@ -72,21 +72,8 @@ config SND_SOC_INTEL_BAYTRAIL
>>            for Baytrail Chromebooks but this option is now deprecated
>> and is
>>            not recommended, use SND_SST_ATOM_HIFI2_PLATFORM instead.
>>
>> -config SND_SST_ATOM_HIFI2_PLATFORM_PCI
>> -       tristate "PCI HiFi2 (Medfield, Merrifield) Platforms"
>> -       depends on X86 && PCI
>> -       select SND_SST_IPC_PCI
>> -       select SND_SOC_COMPRESS
>> -       help
>> -         If you have a Intel Medfield or Merrifield/Edison platform,
>> then
>> -         enable this option by saying Y or m. Distros will typically
>> not
>> -         enable this option: Medfield devices are not available to
>> -         developers and while Merrifield/Edison can run a mainline
>> kernel with
>> -         limited functionality it will require a firmware file which
>> -         is not in the standard firmware tree
>> -
>>   config SND_SST_ATOM_HIFI2_PLATFORM
>> -       tristate "ACPI HiFi2 (Baytrail, Cherrytrail) Platforms"
>> +       tristate "ACPI HiFi2 (Baytrail, Cherrytrail, Merrifield)
>> Platforms"
> 
> Perhaps it makes sense to do something like _HIFI2 and on top
> HIFI2_PLATFORM and HIFI2_PCI, but it seems like a current split.
> 
> So, it means the split itself is not accurate in the first place.
> Pierre, Vinod?
> 
>> +config SND_SOC_INTEL_MRFLD_MACH
>> +       tristate "Merrifield/Edison platform"
> 
> Edison should not be here (it's a board, while Merrifield is a platform)
> 
>> +       depends on X86_INTEL_LPSS && I2C && PCI
> 
> X86_INTEL_LPSS has nothing to do with Merrifield. :-)
> 
>> +       select SND_SST_IPC_PCI
>> +       help
>> +         This adds support for ASoC PCI driver for the Merrifield
>> +         (platform) used e.g. on Intel Edison.  If you have
>> +         Merrifield/Edison platform, then enable this option by
>> saying
>> +         Y or m. Distros will typically not enable this option: while
>> +         Merrifield/Edison can run a mainline kernel with limited
>> +         functionality it will require a firmware file which is not
>> in
>> +         the standard firmware tree.
> 
> Above looks like a solution to me, although I'm not familiar with ASoC
> code, so, I would rely on Pierre, Vinod and Liam suggestions.

I'd suggest that we instead add SND_SST_ATOM_HIFI2_PLATFORM_ACPI (for 
symmetry with PCI) and keep the SND_SST_ATOM_HIFI2_PLATFORM as a common 
part to solve this coexistence.

e.g (untested - just idea)

config SND_SST_ATOM_HIFI2_PLATFORM_PCI
	tristate "PCI HiFi2 (Merrifield) Platforms"
	depends on X86 && PCI
	select SND_SST_IPC_PCI
	select SND_SST_ATOM_HIFI2_PLATFORM

config SND_SST_ATOM_HIFI2_PLATFORM_ACPI
	tristate "ACPI HiFi2 (Baytrail, Cherrytrail) Platforms"
	depends on X86 && ACPI
	select SND_SST_IPC_ACPI
	select SND_SST_ATOM_HIFI2_PLATFORM

config SND_SST_ATOM_HIFI2_PLATFORM
	tristate
	select SND_SOC_COMPRESS

That said changing names would break oldnoconfig so maybe something 
similar that just adds the common layer.

  reply	other threads:[~2018-01-22 16:37 UTC|newest]

Thread overview: 7+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-01-21 22:14 Arnd Bergmann
2018-01-22  9:51 ` Andy Shevchenko
2018-01-22 10:58   ` Arnd Bergmann
2018-01-22 11:39     ` Andy Shevchenko
2018-01-22 16:37       ` Pierre-Louis Bossart [this message]
2018-01-22 20:59         ` [alsa-devel] " Arnd Bergmann
2018-01-22 16:16 ` Pierre-Louis Bossart

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=a463e463-2181-1047-3721-529d8923ad68@linux.intel.com \
    --to=pierre-louis.bossart@linux.intel.com \
    --cc=alsa-devel@alsa-project.org \
    --cc=andriy.shevchenko@linux.intel.com \
    --cc=arnd@arndb.de \
    --cc=broonie@kernel.org \
    --cc=drake@endlessm.com \
    --cc=harshapriya.n@intel.com \
    --cc=lgirdwood@gmail.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=naveen.m@intel.com \
    --cc=tiwai@suse.com \
    --cc=vinod.koul@intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

Powered by JetHome