Re: [PATCH 2/2] drm/rockchip: dsi: Add dphy_get_timing support for multiple PHY types

[Chaoyi Chen <chaoyi.chen@rock-chips.com>]

Hi Heiko,

On 6/3/2026 5:02 AM, Heiko Stuebner wrote:
> Am Dienstag, 24. März 2026, 09:58:38 Mitteleuropäische Sommerzeit schrieb Chaoyi Chen:
>> From: Chaoyi Chen <chaoyi.chen@rock-chips.com>
>>
>> Currently, there are generally two types of DPHY for Rockchip. One is
>> the DPHY used by RK3288/RK3399, whose timing is described by Table A-3
>> High-Speed Transition Times in the databook. The other is the DPHY used
>> by PX30 and its successors. If its timing is still described using
>> RK3288/RK3399, it may not perform correctly on some DSI panel.
>>
>> Add dphy_get_timing for different D-PHY types to adapt to timing
>> differences.
>>
>> Signed-off-by: Chaoyi Chen <chaoyi.chen@rock-chips.com>
>> ---
>>  .../gpu/drm/rockchip/dw-mipi-dsi-rockchip.c   | 45 ++++++++++++++++++-
>>  1 file changed, 43 insertions(+), 2 deletions(-)
>>
>> diff --git a/drivers/gpu/drm/rockchip/dw-mipi-dsi-rockchip.c b/drivers/gpu/drm/rockchip/dw-mipi-dsi-rockchip.c
>> index d3bacfae174e..2d1c9e54ff85 100644
>> --- a/drivers/gpu/drm/rockchip/dw-mipi-dsi-rockchip.c
>> +++ b/drivers/gpu/drm/rockchip/dw-mipi-dsi-rockchip.c
>> @@ -247,6 +247,7 @@ enum {
>>  	BIASEXTR_127_7,
>>  };
>>  
>> +struct dw_mipi_dsi_rockchip;
>>  struct rockchip_dw_dsi_chip_data {
>>  	u32 reg;
>>  
>> @@ -262,6 +263,9 @@ struct rockchip_dw_dsi_chip_data {
>>  	u32 lanecfg2_grf_reg;
>>  	u32 lanecfg2;
>>  
>> +	int (*dphy_get_timing)(struct dw_mipi_dsi_rockchip *dsi, unsigned int lane_mbps,
>> +			       struct dw_mipi_dsi_dphy_timing *timing);
>> +
>>  	int (*dphy_rx_init)(struct phy *phy);
>>  	int (*dphy_rx_power_on)(struct phy *phy);
>>  	int (*dphy_rx_power_off)(struct phy *phy);
>> @@ -721,8 +725,9 @@ static struct hstt hstt_table[] = {
>>  };
>>  
>>  static int
>> -dw_mipi_dsi_phy_get_timing(void *priv_data, unsigned int lane_mbps,
>> -			   struct dw_mipi_dsi_dphy_timing *timing)
>> +dw_mipi_dsi_phy_rk3288_get_timing(struct dw_mipi_dsi_rockchip *dsi,
>> +				  unsigned int lane_mbps,
>> +				  struct dw_mipi_dsi_dphy_timing *timing)
>>  {
>>  	int i;
>>  
>> @@ -738,6 +743,32 @@ dw_mipi_dsi_phy_get_timing(void *priv_data, unsigned int lane_mbps,
>>  	return 0;
>>  }
>>  
>> +static const struct dw_mipi_dsi_dphy_timing dphy_timing_px30 = {
>> +	.clk_lp2hs = 0x40,
>> +	.clk_hs2lp = 0x40,
>> +	.data_lp2hs = 0x10,
>> +	.data_hs2lp = 0x14,
>> +};
> 
> so just to make sure, the timing on the px30 (and later) variant is the
> same for all lane speeds?
>

More precisely, it applies to this fixed value for INNO PHY used after PX30.

> Please include that bit in the commit description
> 

I will add more details in v2. Thank you!

-- 
Best, 
Chaoyi