mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Bernd Schubert <bernd@bsbernd.com>
To: Baokun Li <libaokun@linux.alibaba.com>, fuse-devel@lists.linux.dev
Cc: miklos@szeredi.hu, linux-fsdevel@vger.kernel.org,
	linux-kernel@vger.kernel.org, cding@ddn.com,
	jefflexu@linux.alibaba.com
Subject: Re: [PATCH] fuse: invalidate the correct range after O_APPEND direct write
Date: Wed, 19 Aug 2026 12:14:01 +0200	[thread overview]
Message-ID: <a553af27-fb6d-4136-9caf-c438eb8c9cfe@bsbernd.com> (raw)
In-Reply-To: <20260819090728.3331501-1-libaokun@linux.alibaba.com>



On 8/19/26 11:07, Baokun Li wrote:
> fuse_direct_write_iter() captures pos before generic_write_checks(),
> which moves ki_pos to EOF for O_APPEND writes:
> 
>   fuse_direct_write_iter()
>   {
>       pos = iocb->ki_pos;           /* 0 (user-supplied)       */
>       generic_write_checks();       /* ki_pos -> EOF           */
>       fuse_direct_io();             /* writes at EOF, correct  */
>       invalidate(pos, pos + res);   /* [0, res) -- wrong       */
>   }
> 
> The post-write invalidation targets a stale range instead of the
> actual written range at EOF.
> 
> This can cause data inconsistency when the file size is not
> page-aligned.  The tail page straddling EOF has a valid portion
> before EOF that concurrent readers can fault back in during the
> DIO write window:
> 
>   Tail page (file size X not page-aligned):
> 
>     page_start         X (EOF)   page_end
>     |--- valid data ----|-- stale --|
> 
>   CPU0 (O_APPEND DIO writer)    CPU1 (buffered reader)
>   --------------------------    ----------------------
>   invalidate [X, X+len)
>     tail page evicted
>   FUSE_WRITE in flight ...
>                                 read [page_start, X)
>                                   tail page re-faulted
>                                   [X, page_end) = stale
>   FUSE_WRITE completes
>   i_size = X + len
>   invalidate [0, len)  <- WRONG
>     tail page still cached
>                                 read [X, X+len)
>                                   hits stale tail page
>                                   returns old data
> 
> Fix by reading pos back from iocb->ki_pos after generic_write_checks(),
> as generic_file_direct_write() does.
> 
> Also fix a typo in the comment ("may have" -> "may have competed").
> 
> Fixes: 2b0408d0284f ("fuse: invalidate page cache after DIO and async DIO writes")
> Signed-off-by: Baokun Li <libaokun@linux.alibaba.com>
> ---
>  fs/fuse/file.c | 5 +++--
>  1 file changed, 3 insertions(+), 2 deletions(-)
> 
> diff --git a/fs/fuse/file.c b/fs/fuse/file.c
> index 45ebd1b15874..d12a9fdf770e 100644
> --- a/fs/fuse/file.c
> +++ b/fs/fuse/file.c
> @@ -1789,13 +1789,14 @@ static ssize_t fuse_direct_write_iter(struct kiocb *iocb, struct iov_iter *from)
>  {
>  	struct inode *inode = file_inode(iocb->ki_filp);
>  	struct address_space *mapping = inode->i_mapping;
> -	loff_t pos = iocb->ki_pos;
>  	ssize_t res;
>  	bool exclusive;
>  
>  	fuse_dio_lock(iocb, from, &exclusive);
>  	res = generic_write_checks(iocb, from);
>  	if (res > 0) {
> +		loff_t pos = iocb->ki_pos;
> +
>  		task_io_account_write(res);
>  		if (!is_sync_kiocb(iocb)) {
>  			res = fuse_direct_IO(iocb, from);
> @@ -1810,7 +1811,7 @@ static ssize_t fuse_direct_write_iter(struct kiocb *iocb, struct iov_iter *from)
>  			/*
>  			 * As in generic_file_direct_write(), invalidate after
>  			 * write, to invalidate read-ahead cache that may have
> -			 * with the write.
> +			 * competed with the write.
>  			 */
>  			invalidate_inode_pages2_range(mapping,
>  				pos >> PAGE_SHIFT,

Good catch! Looks like there is a missing xfstest scenario.

Reviewed-by: Bernd Schubert <bernd@bsbernd.com>

  reply	other threads:[~2026-08-19 10:14 UTC|newest]

Thread overview: 3+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-08-19  9:07 Baokun Li
2026-08-19 10:14 ` Bernd Schubert [this message]
2026-08-19 12:40 ` Miklos Szeredi

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=a553af27-fb6d-4136-9caf-c438eb8c9cfe@bsbernd.com \
    --to=bernd@bsbernd.com \
    --cc=cding@ddn.com \
    --cc=fuse-devel@lists.linux.dev \
    --cc=jefflexu@linux.alibaba.com \
    --cc=libaokun@linux.alibaba.com \
    --cc=linux-fsdevel@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=miklos@szeredi.hu \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®