From: Adrian Hunter <adrian.hunter@intel.com>
To: Avri Altman <avri.altman@wdc.com>,
Ulf Hansson <ulf.hansson@linaro.org>,
linux-mmc@vger.kernel.org
Cc: linux-kernel@vger.kernel.org, Brendan Peter <bpeter@lytx.com>
Subject: Re: [PATCH v3 1/2] mmc: block: Issue flush only if allowed
Date: Tue, 20 Apr 2021 14:20:30 +0300 [thread overview]
Message-ID: <a55b7fe7-0d84-a9a6-8f64-6f1632cffcc4@intel.com> (raw)
In-Reply-To: <20210420055306.4858-2-avri.altman@wdc.com>
On 20/04/21 8:53 am, Avri Altman wrote:
> The cache may be flushed to the nonvolatile storage by writing to
> FLUSH_CACHE byte (EXT_CSD byte [32]). When in command queueing mode, the
> cache may be flushed by issuing a CMDQ_TASK_ DEV_MGMT (CMD48) with a
> FLUSH_CACHE op-code. Either way, verify that The cache function is
> turned ON before doing so.
>
> fixes: 1e8e55b67030 (mmc: block: Add CQE support)
>
> Reported-by: Brendan Peter <bpeter@lytx.com>
> Tested-by: Brendan Peter <bpeter@lytx.com>
> Signed-off-by: Avri Altman <avri.altman@wdc.com>
> ---
> drivers/mmc/core/block.c | 7 +++++++
> drivers/mmc/core/mmc.c | 2 +-
> drivers/mmc/core/mmc_ops.h | 5 +++++
> 3 files changed, 13 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/mmc/core/block.c b/drivers/mmc/core/block.c
> index 8bfd4d95b386..5b6501fc9fb7 100644
> --- a/drivers/mmc/core/block.c
> +++ b/drivers/mmc/core/block.c
> @@ -1476,6 +1476,11 @@ static int mmc_blk_cqe_issue_flush(struct mmc_queue *mq, struct request *req)
> struct mmc_queue_req *mqrq = req_to_mmc_queue_req(req);
> struct mmc_request *mrq = mmc_blk_cqe_prep_dcmd(mqrq, req);
>
> + if (mmc_card_mmc(mq->card) && !mmc_flush_allowed(mq->card)) {
> + blk_mq_end_request(req, BLK_STS_OK);
> + return -EPERM;
> + }
> +
> mrq->cmd->opcode = MMC_SWITCH;
> mrq->cmd->arg = (MMC_SWITCH_MODE_WRITE_BYTE << 24) |
> (EXT_CSD_FLUSH_CACHE << 16) |
> @@ -2226,6 +2231,8 @@ enum mmc_issued mmc_blk_mq_issue_rq(struct mmc_queue *mq, struct request *req)
> switch (req_op(req)) {
> case REQ_OP_FLUSH:
> ret = mmc_blk_cqe_issue_flush(mq, req);
> + if (ret == -EPERM)
> + return MMC_REQ_FINISHED;
Using an error code for this case seems a little fragile.
How about something like:
case REQ_OP_FLUSH:
if (mmc_blk_cache_disabled(mq->card)) {
blk_mq_end_request(req, BLK_STS_OK);
return MMC_REQ_FINISHED;
}
ret = mmc_blk_cqe_issue_flush(mq, req);
static bool mmc_blk_cache_disabled(struct mmc_card *card)
{
return mmc_card_mmc(mq->card) && !mmc_flush_allowed(card);
}
> break;
> case REQ_OP_READ:
> case REQ_OP_WRITE:
> diff --git a/drivers/mmc/core/mmc.c b/drivers/mmc/core/mmc.c
> index 9ad4aa537867..e3da62ffcb5e 100644
> --- a/drivers/mmc/core/mmc.c
> +++ b/drivers/mmc/core/mmc.c
> @@ -2037,7 +2037,7 @@ static int _mmc_flush_cache(struct mmc_card *card)
> {
> int err = 0;
>
> - if (card->ext_csd.cache_size > 0 && card->ext_csd.cache_ctrl & 1) {
> + if (mmc_flush_allowed(card)) {
> err = mmc_switch(card, EXT_CSD_CMD_SET_NORMAL,
> EXT_CSD_FLUSH_CACHE, 1,
> CACHE_FLUSH_TIMEOUT_MS);
> diff --git a/drivers/mmc/core/mmc_ops.h b/drivers/mmc/core/mmc_ops.h
> index 5782fdf4e8e9..2682bf66708a 100644
> --- a/drivers/mmc/core/mmc_ops.h
> +++ b/drivers/mmc/core/mmc_ops.h
> @@ -19,6 +19,11 @@ enum mmc_busy_cmd {
> struct mmc_host;
> struct mmc_card;
>
> +static inline bool mmc_flush_allowed(struct mmc_card *card)
> +{
> + return card->ext_csd.cache_size > 0 && card->ext_csd.cache_ctrl & 1;
> +}
> +
> int mmc_select_card(struct mmc_card *card);
> int mmc_deselect_cards(struct mmc_host *host);
> int mmc_set_dsr(struct mmc_host *host);
>
next prev parent reply other threads:[~2021-04-20 11:20 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-04-20 5:53 [PATCH v3 0/2] Do not flush cache when it is disabled Avri Altman
2021-04-20 5:53 ` [PATCH v3 1/2] mmc: block: Issue flush only if allowed Avri Altman
2021-04-20 11:20 ` Adrian Hunter [this message]
2021-04-20 13:22 ` Avri Altman
2021-04-20 5:53 ` [PATCH v3 2/2] mmc: block: Update ext_csd.cache_ctrl if it was written Avri Altman
2021-04-20 11:22 ` Adrian Hunter
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=a55b7fe7-0d84-a9a6-8f64-6f1632cffcc4@intel.com \
--to=adrian.hunter@intel.com \
--cc=avri.altman@wdc.com \
--cc=bpeter@lytx.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mmc@vger.kernel.org \
--cc=ulf.hansson@linaro.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®