From: Neil Armstrong <neil.armstrong@linaro.org>
To: Konrad Dybcio <konrad.dybcio@linaro.org>,
Bjorn Andersson <andersson@kernel.org>,
Rob Herring <robh@kernel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
Conor Dooley <conor+dt@kernel.org>
Cc: Marijn Suijten <marijn.suijten@somainline.org>,
linux-arm-msm@vger.kernel.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org
Subject: Re: [PATCH v2] arm64: dts: qcom: sm8550: Switch UFS from opp-table-hz to opp-v2
Date: Sat, 3 Feb 2024 21:12:37 +0100 [thread overview]
Message-ID: <a594ca1e-bef6-4ce9-b5c7-02999969a756@linaro.org> (raw)
In-Reply-To: <20240203-topic-8550_ufs_oppv2-v2-1-b0bef2a73e6c@linaro.org>
On 03/02/2024 01:10, Konrad Dybcio wrote:
> Now that the non-legacy form of OPP is supported within the UFS driver,
> go ahead and switch to it, adding support for more intermediate freq/power
> states.
>
> Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
> ---
> Extracted out of:
> https://lore.kernel.org/linux-arm-msm/15d2bd66-29f3-435b-8494-d82ec4036413@linaro.org/#t
>
> Changes since v1:
> - Set the reference clock rate to 0 in opp entries, it doesn't support
> ratesetting anyway. Confirmed UFS still works.
> ---
> arch/arm64/boot/dts/qcom/sm8550.dtsi | 50 +++++++++++++++++++++++++++++-------
> 1 file changed, 41 insertions(+), 9 deletions(-)
>
> diff --git a/arch/arm64/boot/dts/qcom/sm8550.dtsi b/arch/arm64/boot/dts/qcom/sm8550.dtsi
> index c89d8f3dad21..144e20edf237 100644
> --- a/arch/arm64/boot/dts/qcom/sm8550.dtsi
> +++ b/arch/arm64/boot/dts/qcom/sm8550.dtsi
> @@ -1966,6 +1966,7 @@ ufs_mem_hc: ufs@1d84000 {
> iommus = <&apps_smmu 0x60 0x0>;
> dma-coherent;
>
> + operating-points-v2 = <&ufs_opp_table>;
> interconnects = <&aggre1_noc MASTER_UFS_MEM 0 &mc_virt SLAVE_EBI1 0>,
> <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_UFS_MEM_CFG 0>;
>
> @@ -1986,18 +1987,49 @@ ufs_mem_hc: ufs@1d84000 {
> <&gcc GCC_UFS_PHY_TX_SYMBOL_0_CLK>,
> <&gcc GCC_UFS_PHY_RX_SYMBOL_0_CLK>,
> <&gcc GCC_UFS_PHY_RX_SYMBOL_1_CLK>;
> - freq-table-hz =
> - <75000000 300000000>,
> - <0 0>,
> - <0 0>,
> - <75000000 300000000>,
> - <100000000 403000000>,
> - <0 0>,
> - <0 0>,
> - <0 0>;
> qcom,ice = <&ice>;
>
> status = "disabled";
> +
> + ufs_opp_table: opp-table {
> + compatible = "operating-points-v2";
> +
> + opp-75000000 {
> + opp-hz = /bits/ 64 <75000000>,
> + /bits/ 64 <0>,
> + /bits/ 64 <0>,
> + /bits/ 64 <75000000>,
> + /bits/ 64 <0>,
> + /bits/ 64 <0>,
> + /bits/ 64 <0>,
> + /bits/ 64 <0>;
> + required-opps = <&rpmhpd_opp_low_svs>;
> + };
> +
> + opp-150000000 {
> + opp-hz = /bits/ 64 <150000000>,
> + /bits/ 64 <0>,
> + /bits/ 64 <0>,
> + /bits/ 64 <150000000>,
> + /bits/ 64 <0>,
> + /bits/ 64 <0>,
> + /bits/ 64 <0>,
> + /bits/ 64 <0>;
> + required-opps = <&rpmhpd_opp_svs>;
> + };
> +
> + opp-300000000 {
> + opp-hz = /bits/ 64 <300000000>,
> + /bits/ 64 <0>,
> + /bits/ 64 <0>,
> + /bits/ 64 <300000000>,
> + /bits/ 64 <0>,
> + /bits/ 64 <0>,
> + /bits/ 64 <0>,
> + /bits/ 64 <0>;
> + required-opps = <&rpmhpd_opp_nom>;
> + };
> + };
> };
>
> ice: crypto@1d88000 {
>
> ---
> base-commit: 076d56d74f17e625b3d63cf4743b3d7d02180379
> change-id: 20240203-topic-8550_ufs_oppv2-bb88d63a4c58
>
> Best regards,
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8550-QRD
next prev parent reply other threads:[~2024-02-03 20:12 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-02-03 0:10 Konrad Dybcio
2024-02-03 14:54 ` Neil Armstrong
2024-02-03 20:12 ` Neil Armstrong [this message]
2024-02-14 17:57 ` Bjorn Andersson
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=a594ca1e-bef6-4ce9-b5c7-02999969a756@linaro.org \
--to=neil.armstrong@linaro.org \
--cc=andersson@kernel.org \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=konrad.dybcio@linaro.org \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=marijn.suijten@somainline.org \
--cc=robh@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®