From: Ravi Gunasekaran <r-gunasekaran@ti.com>
To: <peter.chen@kernel.org>, <pawell@cadence.com>, <rogerq@kernel.org>
Cc: <gregkh@linuxfoundation.org>, <linux-usb@vger.kernel.org>,
<linux-kernel@vger.kernel.org>, <srk@ti.com>,
Ravi Gunasekaran <r-gunasekaran@ti.com>
Subject: Re: [PATCH v2 1/2] usb: cdns3: Add quirk flag to enable suspend residency
Date: Thu, 16 May 2024 10:05:01 +0530 [thread overview]
Message-ID: <a5a4db25-01a6-eec0-53fe-166029f71aec@ti.com> (raw)
In-Reply-To: <20240516042845.31211-2-r-gunasekaran@ti.com>
On 5/16/24 9:58 AM, Ravi Gunasekaran wrote:
> From: Roger Quadros <rogerq@kernel.org>
>
> Some platforms (e.g. ti,j721e-usb, ti,am64-usb) require
> this bit to be set to workaround a lockup issue with PHY
> short suspend intervals [1]. Add a platform quirk flag
> to indicate if Suspend Residency should be enabled.
>
> [1] - https://www.ti.com/lit/er/sprz457h/sprz457h.pdf
> i2409 - USB: USB2 PHY locks up due to short suspend
>
> Signed-off-by: Roger Quadros <rogerq@kernel.org>
> Signed-off-by: Ravi Gunasekaran <r-gunasekaran@ti.com>
> ---
> Change log:
> ----------
>
> Changes since v1:
> ----------------
> * Grouped the susp_ctrl register update along with
> existing CDNS3 snippet as suggested by Peter Chen
>
> v1: https://lore.kernel.org/all/20240514092421.20897-1-r-gunasekaran@ti.com/#t
[...]
> - u32 state;
> + u32 state, reg;
> int ret;
>
> regs = devm_ioremap_resource(cdns->dev, &cdns->otg_res);
> @@ -433,12 +433,21 @@ int cdns_drd_init(struct cdns *cdns)
> cdns->otg_irq_regs = (struct cdns_otg_irq_regs __iomem *)
> &cdns->otg_v1_regs->ien;
> writel(1, &cdns->otg_v1_regs->simulate);
> +
> + if (cdns->pdata &&
> + (cdns->pdata->quirks & CDNS3_DRD_SUSPEND_RESIDENCY_ENABLE)) {
> + reg = readl(&cdns->otg_v1_regs->susp_ctrl);
> + reg |= SUSP_CTRL_SUSPEND_RESIDENCY_ENABLE;
> + writel(reg, &cdns->otg_v1_regs->susp_ctrl);
> + }
> +
> cdns->version = CDNS3_CONTROLLER_V1;
> } else {
> dev_err(cdns->dev, "not supported DID=0x%08x\n", state);
> return -EINVAL;
> }
>
> +
Please ignore this patch. I didn't notice this.
I will send a v3 fixing it.
> dev_dbg(cdns->dev, "DRD version v1 (ID: %08x, rev: %08x)\n",
> readl(&cdns->otg_v1_regs->did),
> readl(&cdns->otg_v1_regs->rid));
> diff --git a/drivers/usb/cdns3/drd.h b/drivers/usb/cdns3/drd.h
> index d72370c321d3..1e2aee14d629 100644
> --- a/drivers/usb/cdns3/drd.h
> +++ b/drivers/usb/cdns3/drd.h
> @@ -193,6 +193,9 @@ struct cdns_otg_irq_regs {
> /* OTGREFCLK - bitmasks */
> #define OTGREFCLK_STB_CLK_SWITCH_EN BIT(31)
>
> +/* SUPS_CTRL - bitmasks */
> +#define SUSP_CTRL_SUSPEND_RESIDENCY_ENABLE BIT(17)
> +
> /* OVERRIDE - bitmasks */
> #define OVERRIDE_IDPULLUP BIT(0)
> /* Only for CDNS3_CONTROLLER_V0 version */
--
Regards,
Ravi
next prev parent reply other threads:[~2024-05-16 4:35 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-05-16 4:28 [PATCH v2 0/2] TI AM64/J7: USB Errata i2409 workaround Ravi Gunasekaran
2024-05-16 4:28 ` [PATCH v2 1/2] usb: cdns3: Add quirk flag to enable suspend residency Ravi Gunasekaran
2024-05-16 4:35 ` Ravi Gunasekaran [this message]
2024-05-16 4:28 ` [PATCH v2 2/2] usb: cdns3-ti: Add workaround for Errata i2409 Ravi Gunasekaran
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=a5a4db25-01a6-eec0-53fe-166029f71aec@ti.com \
--to=r-gunasekaran@ti.com \
--cc=gregkh@linuxfoundation.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-usb@vger.kernel.org \
--cc=pawell@cadence.com \
--cc=peter.chen@kernel.org \
--cc=rogerq@kernel.org \
--cc=srk@ti.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®