Re: [PATCH v3 0/1] xen: fix HVM kexec kernel panic

[Boris Ostrovsky <boris.ostrovsky@oracle.com>]

On 2/28/22 11:56 PM, Dongli Zhang wrote:
> Hi Boris,
>
> On 2/28/22 5:18 PM, Dongli Zhang wrote:
>> Hi Boris,
>>
>> On 2/28/22 12:45 PM, Boris Ostrovsky wrote:
>>>
>>> On 2/25/22 8:17 PM, Dongli Zhang wrote:
>>>> Hi Boris,
>>>>
>>>> On 2/25/22 2:39 PM, Boris Ostrovsky wrote:
>>>>> On 2/24/22 4:50 PM, Dongli Zhang wrote:
>>>>>> This is the v3 of the patch to fix xen kexec kernel panic issue when the
>>>>>> kexec is triggered on VCPU >= 32.
>>>>>>
>>>>>> PANIC: early exception 0x0e IP 10:ffffffffa96679b6 error 0 cr2 0x20
>>>>>> [    0.000000] CPU: 0 PID: 0 Comm: swapper Not tainted
>>>>>> 5.17.0-rc4xen-00054-gf71077a4d84b-dirty #1
>>>>>> [    0.000000] Hardware name: Xen HVM domU, BIOS 4.4.4OVM 12/15/2020
>>>>>> [    0.000000] RIP: 0010:pvclock_clocksource_read+0x6/0xb0
>>>>>> ... ...
>>>>>> [    0.000000] RSP: 0000:ffffffffaae03e10 EFLAGS: 00010082 ORIG_RAX:
>>>>>> 0000000000000000
>>>>>> [    0.000000] RAX: 0000000000000000 RBX: 0000000000010000 RCX:
>>>>>> 0000000000000002
>>>>>> [    0.000000] RDX: 0000000000000003 RSI: ffffffffaac37515 RDI:
>>>>>> 0000000000000020
>>>>>> [    0.000000] RBP: 0000000000011000 R08: 0000000000000000 R09:
>>>>>> 0000000000000001
>>>>>> [    0.000000] R10: ffffffffaae03df8 R11: ffffffffaae03c68 R12:
>>>>>> 0000000040000004
>>>>>> [    0.000000] R13: ffffffffaae03e50 R14: 0000000000000000 R15:
>>>>>> 0000000000000000
>>>>>> [    0.000000] FS:  0000000000000000(0000) GS:ffffffffab588000(0000)
>>>>>> knlGS:0000000000000000
>>>>>> [    0.000000] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
>>>>>> [    0.000000] CR2: 0000000000000020 CR3: 00000000ea410000 CR4:
>>>>>> 00000000000406a0
>>>>>> [    0.000000] DR0: 0000000000000000 DR1: 0000000000000000 DR2:
>>>>>> 0000000000000000
>>>>>> [    0.000000] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7:
>>>>>> 0000000000000400
>>>>>> [    0.000000] Call Trace:
>>>>>> [    0.000000]  <TASK>
>>>>>> [    0.000000]  ? xen_clocksource_read+0x24/0x40
>>>>>
>>>>> This is done to set xen_sched_clock_offset which I think will not be used for a
>>>>> while, until sched_clock is called (and the other two uses are for
>>>>> suspend/resume)
>>>>>
>>>>>
>>>>> Can we simply defer 'xen_sched_clock_offset = xen_clocksource_read();' until
>>>>> after all vcpu areas are properly set? Or are there other uses of
>>>>> xen_clocksource_read() before ?
>>>>>
>>>> I have tested that below patch will panic kdump kernel.
>>>>
>>>
>>>
>>> Oh well, so much for that then. Yes, sched_clock() is at least called from
>>> printk path.
>>>
>>>
>>> I guess we will have to go with v2 then, we don't want to start seeing time
>>> going back, even if only with older hypervisors. The only thing I might ask is
>>> that you roll the logic inside xen_hvm_init_time_ops(). Something like
>>>
>>>
>>> xen_hvm_init_time_ops()
>>> {
>>>      /*
>>>       * Wait until per_cpu(xen_vcpu, 0) is initialized which may happen
>>>       * later (e.g. when kdump kernel runs on >=MAX_VIRT_CPUS vcpu)
>>>       */
>>>      if (__this_cpu_read(xen_vcpu_nr(0)) == NULL)
>>>          return;
>>>
>> I think you meant __this_cpu_read(xen_vcpu).
>>
>> I will call xen_hvm_init_time_ops() at both places, and move the logic into
>> xen_hvm_init_time_ops().
>>
>> Thank you very much!
>>
>> Dongli Zhang
>>
>
> How about we do not move the logic into xen_hvm_init_time_ops()?
>
> Suppose we move the logic into xen_hvm_init_time_ops() line 573, the line line
> 570 might be printed twice.


You would need to make sure the routine is executed only once so something like a local static variable would be needed.


>
>
> 559 void __init xen_hvm_init_time_ops(void)
> 560 {
> 561         /*
> 562          * vector callback is needed otherwise we cannot receive interrupts
> 563          * on cpu > 0 and at this point we don't know how many cpus are
> 564          * available.
> 565          */
> 566         if (!xen_have_vector_callback)
> 567                 return;
> 568
> 569         if (!xen_feature(XENFEAT_hvm_safe_pvclock)) {
> 570                 pr_info("Xen doesn't support pvclock on HVM, disable pv timer");
> 571                 return;
> 572         }
> 573
> 574         xen_init_time_common();
> 575
> 576         x86_init.timers.setup_percpu_clockev = xen_time_init;
> 577         x86_cpuinit.setup_percpu_clockev = xen_hvm_setup_cpu_clockevents;
> 578
> 579         x86_platform.set_wallclock = xen_set_wallclock;
> 580 }
>
> I feel the code looks better if we keep the logic at caller side. Would you mind
> letting me know your feedback?


My preference is to keep logic concentrated in one place whenever possible.


-boris