Re: [PATCH] x86/acpi: Don't add CPUs that are not online capable

[Hanjun Guo <guohanjun@huawei.com>]

On 2021/8/12 13:16, Mario Limonciello wrote:
> A number of systems are showing "hotplug capable" CPUs when they
> are not really hotpluggable.  This is because the MADT has extra
> CPU entries to support different CPUs that may be inserted into
> the socket with different numbers of cores.
> 
> The ACPI spec is clear that the Online Capable bit in the
> MADT should be used to determine whether or not a CPU is hotplug
> capable when the enabled bit is not set.

This was introduced in ACPI 6.3 spec, which means ACPI 6.2 and
earlier versions don't include the "Online Capable bit".

> 
> Link: https://uefi.org/htmlspecs/ACPI_Spec_6_4_html/05_ACPI_Software_Programming_Model/ACPI_Software_Programming_Model.html?#local-apic-flags
> Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
> Reviewed-by: Huang Rui <ray.huang@amd.com>
> Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
> ---
>   arch/x86/kernel/acpi/boot.c | 6 ++++++
>   include/acpi/actbl2.h       | 1 +
>   2 files changed, 7 insertions(+)
> 
> diff --git a/arch/x86/kernel/acpi/boot.c b/arch/x86/kernel/acpi/boot.c
> index e55e0c1fad8c..eeb10b27d6de 100644
> --- a/arch/x86/kernel/acpi/boot.c
> +++ b/arch/x86/kernel/acpi/boot.c
> @@ -239,6 +239,12 @@ acpi_parse_lapic(union acpi_subtable_headers * header, const unsigned long end)
>   	if (processor->id == 0xff)
>   		return 0;
>   
> +	/* don't register processors that can not be onlined */
> +	if (!(processor->lapic_flags & ACPI_MADT_ENABLED)) {
> +		if (!(processor->lapic_flags & ACPI_MADT_ONLINE_CAPABLE))
> +			return 0;
> +	}

For firmware using ACPI 6.2 and early versions, the
ACPI_MADT_ONLINE_CAPABLE bit is reserved as zero, so if
we set CPU as disabled, the code here will always return
0 in those firmwares.

> +
>   	/*
>   	 * We need to register disabled CPU as well to permit
>   	 * counting disabled CPUs. This allows us to size

So we will not register the disabled CPU and will break
CPU hotplug features.

I think we need to consider the compatibility with old versions
of firmware.

Thanks
Hanjun