Re: [PATCH v2] drm/bridge: adv7511: Attach to DSI host at probe time

[Andrzej Hajda <a.hajda@samsung.com>]

On 27.06.2019 17:18, Matt Redfearn wrote:
> In contrast to all of the DSI panel drivers in drivers/gpu/drm/panel
> which attach to the DSI host via mipi_dsi_attach() at probe time, the
> ADV7533 bridge device does not. Instead it defers this to the point that
> the upstream device connects to its bridge via drm_bridge_attach().
> The generic Synopsys MIPI DSI host driver does not register it's own
> drm_bridge until the MIPI DSI has attached. But it does not call
> drm_bridge_attach() on the downstream device until the upstream device
> has attached. This leads to a chicken and the egg failure and the DRM
> pipeline does not complete.
> Since all other mipi_dsi_device drivers call mipi_dsi_attach() in
> probe(), make the adv7533 mipi_dsi_device do the same. This ensures that
> the Synopsys MIPI DSI host registers it's bridge such that it is
> available for the upstream device to connect to.
>
> Signed-off-by: Matt Redfearn <matt.redfearn@thinci.com>

Queued to drm-misc-next.


Regards

Andrzej

>
> ---
>
> Changes in v2:
> Cleanup if adv7533_attach_dsi fails.
>
>  drivers/gpu/drm/bridge/adv7511/adv7511_drv.c | 12 +++++++++---
>  1 file changed, 9 insertions(+), 3 deletions(-)
>
> diff --git a/drivers/gpu/drm/bridge/adv7511/adv7511_drv.c b/drivers/gpu/drm/bridge/adv7511/adv7511_drv.c
> index e7ddd3e3db9..807827bd910 100644
> --- a/drivers/gpu/drm/bridge/adv7511/adv7511_drv.c
> +++ b/drivers/gpu/drm/bridge/adv7511/adv7511_drv.c
> @@ -874,9 +874,6 @@ static int adv7511_bridge_attach(struct drm_bridge *bridge)
>  				 &adv7511_connector_helper_funcs);
>  	drm_connector_attach_encoder(&adv->connector, bridge->encoder);
>  
> -	if (adv->type == ADV7533)
> -		ret = adv7533_attach_dsi(adv);
> -
>  	if (adv->i2c_main->irq)
>  		regmap_write(adv->regmap, ADV7511_REG_INT_ENABLE(0),
>  			     ADV7511_INT0_HPD);
> @@ -1222,8 +1219,17 @@ static int adv7511_probe(struct i2c_client *i2c, const struct i2c_device_id *id)
>  	drm_bridge_add(&adv7511->bridge);
>  
>  	adv7511_audio_init(dev, adv7511);
> +
> +	if (adv7511->type == ADV7533) {
> +		ret = adv7533_attach_dsi(adv7511);
> +		if (ret)
> +			goto err_remove_bridge;
> +	}
> +
>  	return 0;
>  
> +err_remove_bridge:
> +	drm_bridge_remove(&adv7511->bridge);
>  err_unregister_cec:
>  	i2c_unregister_device(adv7511->i2c_cec);
>  	if (adv7511->cec_clk)