Re: [PATCH 1/2] staging: typec: tcpm: Report right typec_pwr_opmode

[Guenter Roeck <linux@roeck-us.net>]

On 08/15/2017 04:22 PM, Badhri Jagan Sridharan wrote:
> At present, TCPM does not take into account the actual resistor
> value presented in the CC line and therefore reports TYPEC_PWR_MODE_USB
> irrespective of the power_op_mode it is in.
> This patch makes TCPM consider the actual value of Rp.
> 
> Signed-off-by: Badhri Jagan Sridharan <Badhri@google.com>

Reviewed-by: Guenter Roeck <linux@roeck-us.net>

> ---
>   drivers/staging/typec/tcpm.c | 21 +++++++++++++++++++--
>   1 file changed, 19 insertions(+), 2 deletions(-)
> 
> diff --git a/drivers/staging/typec/tcpm.c b/drivers/staging/typec/tcpm.c
> index 20eb4ebcf8c3..a24e6bbb909c 100644
> --- a/drivers/staging/typec/tcpm.c
> +++ b/drivers/staging/typec/tcpm.c
> @@ -2123,9 +2123,23 @@ static void tcpm_swap_complete(struct tcpm_port *port, int result)
>   	}
>   }
>   
> +enum typec_pwr_opmode tcpm_get_pwr_opmode(enum typec_cc_status cc)
> +{
> +	switch (cc) {
> +	case TYPEC_CC_RP_1_5:
> +		return TYPEC_PWR_MODE_1_5A;
> +	case TYPEC_CC_RP_3_0:
> +		return TYPEC_PWR_MODE_3_0A;
> +	case TYPEC_CC_RP_DEF:
> +	default:
> +		return TYPEC_PWR_MODE_USB;
> +	}
> +}
> +
>   static void run_state_machine(struct tcpm_port *port)
>   {
>   	int ret;
> +	enum typec_pwr_opmode opmode;
>   
>   	port->enter_state = port->state;
>   	switch (port->state) {
> @@ -2201,7 +2215,8 @@ static void run_state_machine(struct tcpm_port *port)
>   			       ret < 0 ? 0 : PD_T_PS_SOURCE_ON);
>   		break;
>   	case SRC_STARTUP:
> -		typec_set_pwr_opmode(port->typec_port, TYPEC_PWR_MODE_USB);
> +		opmode =  tcpm_get_pwr_opmode(tcpm_rp_cc(port));
> +		typec_set_pwr_opmode(port->typec_port, opmode);
>   		port->pwr_opmode = TYPEC_PWR_MODE_USB;
>   		port->caps_count = 0;
>   		port->message_id = 0;
> @@ -2362,7 +2377,9 @@ static void run_state_machine(struct tcpm_port *port)
>   		break;
>   	case SNK_STARTUP:
>   		/* XXX: callback into infrastructure */
> -		typec_set_pwr_opmode(port->typec_port, TYPEC_PWR_MODE_USB);
> +		opmode =  tcpm_get_pwr_opmode(port->polarity ?
> +					      port->cc2 : port->cc1);
> +		typec_set_pwr_opmode(port->typec_port, opmode);
>   		port->pwr_opmode = TYPEC_PWR_MODE_USB;
>   		port->message_id = 0;
>   		port->rx_msgid = -1;
>