Re: [PATCH V2 3/4] arm64: dts: qcom: ipq6018: add QFPROM node

[Konrad Dybcio <konrad.dybcio@linaro.org>]

On 26.05.2023 15:22, Dmitry Baryshkov wrote:
> On Fri, 26 May 2023 at 15:54, Kathiravan T <quic_kathirav@quicinc.com> wrote:
>>
>> IPQ6018 has efuse region to determine the various HW quirks. Lets
>> add the initial support and the individual fuses will be added as they
>> are required.
>>
>> Signed-off-by: Kathiravan T <quic_kathirav@quicinc.com>
>> ---
>> Changes in V2:
>>         - Reorder the node based on node address
>>
>>  arch/arm64/boot/dts/qcom/ipq6018.dtsi | 7 +++++++
>>  1 file changed, 7 insertions(+)
>>
>> diff --git a/arch/arm64/boot/dts/qcom/ipq6018.dtsi b/arch/arm64/boot/dts/qcom/ipq6018.dtsi
>> index f531797f2619..0f6d6c6daed2 100644
>> --- a/arch/arm64/boot/dts/qcom/ipq6018.dtsi
>> +++ b/arch/arm64/boot/dts/qcom/ipq6018.dtsi
>> @@ -302,6 +302,13 @@
>>                         status = "disabled";
>>                 };
>>
>> +               qfprom: efuse@a4000 {
>> +                       compatible = "qcom,ipq6018-qfprom", "qcom,qfprom";
>> +                       reg = <0x0 0x000a4000 0x0 0x2000>;
>> +                       #address-cells = <1>;
>> +                       #size-cells = <1>;
>> +               };
>> +
>>                 prng: qrng@e1000 {
>>                         compatible = "qcom,prng-ee";
>>                         reg = <0x0 0x000e3000 0x0 0x1000>;
> 
> It looks like the prng node name is incorrect. It should be qrng@e3000
> instead of qrng@e1000. Could you please send a followup to fix it?
In case that wasn't clear, since I think this series will go in as-is,
that fix would be sent separately, on top of this.

Konrad
> 
> For this patch:
> 
> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
> 
>> --
>> 2.17.1
>>
> 
>