From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1753610AbdKIIcY (ORCPT ); Thu, 9 Nov 2017 03:32:24 -0500 Received: from fllnx209.ext.ti.com ([198.47.19.16]:56235 "EHLO fllnx209.ext.ti.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1753588AbdKIIcU (ORCPT ); Thu, 9 Nov 2017 03:32:20 -0500 Subject: Re: [PATCH] ARM: dts: add phy-reset property for rk3066a-rayeager emac To: Chris Zhong , Florian Fainelli , Vladimir Zapolskiy , Sergei Shtylyov , CC: Mark Rutland , , , , Russell King , , , Rob Herring , References: <1510022959-19440-1-git-send-email-zyw@rock-chips.com> <464f7b9f-1c07-286e-1b7f-bdef0332b4c9@rock-chips.com> From: Roger Quadros Message-ID: Date: Thu, 9 Nov 2017 10:28:03 +0200 User-Agent: Mozilla/5.0 (X11; Linux x86_64; rv:52.0) Gecko/20100101 Thunderbird/52.4.0 MIME-Version: 1.0 In-Reply-To: <464f7b9f-1c07-286e-1b7f-bdef0332b4c9@rock-chips.com> Content-Type: text/plain; charset="utf-8" Content-Language: en-GB Content-Transfer-Encoding: 8bit X-EXCLAIMER-MD-CONFIG: e1e8a2fd-e40a-4ac6-ac9b-f7e9cc9ee180 Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org On 08/11/17 11:49, Chris Zhong wrote: > Hi Florian Fainelli > > > On 2017年11月08日 02:26, Florian Fainelli wrote: >> On 11/07/2017 01:51 AM, Chris Zhong wrote: >>> >>> On 2017年11月07日 15:54, Vladimir Zapolskiy wrote: >>>> Hello Chris, >>>> >>>> On 11/07/2017 04:49 AM, Chris Zhong wrote: >>>>> The ethernet phy of rk3066a-rayeager has a reset pin, it controlled by >>>>> GPIO1_D6, this pin should be pull down then pull up to reset the phy. >>>>> Add a phy-reset property in emac, make the phy can be reset when emac >>>>> power on. >>>> for PHY reset there are properties 'reset-gpios' and 'reset-delay-us', >>>> please reference to Documentation/devicetree/bindings/net/mdio.txt >>>> >>>> Can you try to reuse them instead of adding new custom properties? >>> This phy-reset is from Documentation/devicetree/bindings/net/arc_emac.txt. >>> And copy from arch/arm/boot/dts/rk3036-kylin.dts. >>> Can we just use these properties, they are not new. >> Because it already exists does not mean it's correct, in fact, it is not >> at all because it places the reset property for a PHY into the MAC node, >> which is just not what this is, what we should be using instead is the >> following patch series: >> >> http://patchwork.ozlabs.org/project/netdev/list/?series=9267 >> >> http://patchwork.ozlabs.org/patch/828499/ >> http://patchwork.ozlabs.org/patch/828505/ >> http://patchwork.ozlabs.org/patch/828501/ >> http://patchwork.ozlabs.org/patch/828502/ > Okay, this series works for me, and I will push a new version patch following it, > with a reset-gpios property under phy node. > And hope this series can be applied soon. > If 'reset-gpios' and 'reset-delay-us' as per [1] works for you then why not use that? [1] Documentation/devicetree/bindings/net/mdio.txt > Thanks > Chris Zhong > > >>>> As a side question, which is mainly addressed to Sergei and Roger, >>>> I don't quite understand why PHY properties were initially added to >>>> MAC/MDIO bus device tree nodes, in my opinion they must be moved under >>>> PHY device tree nodes. >>>> >>>> --  >>>> With best wishes, >>>> Vladimir >>>> >>>>> Signed-off-by: Chris Zhong >>>>> --- >>>>> >>>>>    arch/arm/boot/dts/rk3066a-rayeager.dts | 2 ++ >>>>>    1 file changed, 2 insertions(+) >>>>> >>>>> diff --git a/arch/arm/boot/dts/rk3066a-rayeager.dts >>>>> b/arch/arm/boot/dts/rk3066a-rayeager.dts >>>>> index 570157f..6064a0a 100644 >>>>> --- a/arch/arm/boot/dts/rk3066a-rayeager.dts >>>>> +++ b/arch/arm/boot/dts/rk3066a-rayeager.dts >>>>> @@ -173,6 +173,8 @@ >>>>>        pinctrl-0 = <&emac_xfer>, <&emac_mdio>, <&rmii_rst>; >>>>>        phy = <&phy0>; >>>>>        phy-supply = <&vcc_rmii>; >>>>> +    phy-reset-gpios = <&gpio1 RK_PD6 GPIO_ACTIVE_LOW>; /* PHY_RST */ >>>>> +    phy-reset-duration = <10>; /* millisecond */ >>>>>        status = "okay"; >>>>>          phy0: ethernet-phy@0 { >>>>> >>>> >> > -- cheers, -roger Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki. Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki