From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1752043AbdGEP3X (ORCPT ); Wed, 5 Jul 2017 11:29:23 -0400 Received: from esa6.microchip.iphmx.com ([216.71.154.253]:48948 "EHLO esa6.microchip.iphmx.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1750908AbdGEP3V (ORCPT ); Wed, 5 Jul 2017 11:29:21 -0400 X-IronPort-AV: E=Sophos;i="5.40,312,1496127600"; d="scan'208";a="1960221" Subject: Re: [PATCH v2 4/5] ARM: dts: at91: at91-sama5d27_som1: add sama5d27 SoM1 support To: Claudiu Beznea , , , , , , , , , References: <1499086572-6083-1-git-send-email-claudiu.beznea@microchip.com> <1499086572-6083-5-git-send-email-claudiu.beznea@microchip.com> <20170705152343.b735on6edg3vfsp3@rfolt0960.corp.atmel.com> From: Nicolas Ferre Organization: microchip Message-ID: Date: Wed, 5 Jul 2017 17:29:52 +0200 User-Agent: Mozilla/5.0 (X11; Linux x86_64; rv:52.0) Gecko/20100101 Thunderbird/52.1.1 MIME-Version: 1.0 In-Reply-To: <20170705152343.b735on6edg3vfsp3@rfolt0960.corp.atmel.com> Content-Type: text/plain; charset="utf-8" Content-Language: en-US Content-Transfer-Encoding: 7bit Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org On 05/07/2017 at 17:23, Ludovic Desroches wrote: > On Mon, Jul 03, 2017 at 03:56:11PM +0300, Claudiu Beznea wrote: >> Add specific DTS file and bindings for sama5d27 SoM1 board. >> >> Signed-off-by: Claudiu Beznea >> Signed-off-by: Cristian Birsan >> --- >> arch/arm/boot/dts/at91-sama5d27_som1.dtsi | 178 ++++++++++++++++++++++++++++++ >> 1 file changed, 178 insertions(+) >> create mode 100644 arch/arm/boot/dts/at91-sama5d27_som1.dtsi >> >> diff --git a/arch/arm/boot/dts/at91-sama5d27_som1.dtsi b/arch/arm/boot/dts/at91-sama5d27_som1.dtsi >> new file mode 100644 >> index 0000000..c3a1dc8 >> --- /dev/null >> +++ b/arch/arm/boot/dts/at91-sama5d27_som1.dtsi > > [...] > >> + >> + i2c0: i2c@f8028000 { >> + dmas = <0>, <0>; >> + pinctrl-names = "default"; >> + pinctrl-0 = <&pinctrl_i2c0_default>; >> + i2c-sda-hold-time-ns = <350>; >> + status = "disabled"; >> + >> + 24aa@50 { >> + compatible = "24mac602"; >> + reg = <0x50>; >> + pagesize = <8>; >> + start-offset = /bits/ 8 <0xf8>; > > Are you sure about the offset? I thought it was 0xfa but maybe I am > wrong. Moreover, as the binding for this is not yet accepted I would advice to remove this part for now. It will be easier for synchronization with i2c eeprom. Best regards, -- Nicolas Ferre