From: Suman Anna <s-anna@ti.com>
To: Clement Leger <cleger@kalray.eu>,
Ohad Ben-Cohen <ohad@wizery.com>,
Bjorn Andersson <bjorn.andersson@linaro.org>,
Patrice Chotard <patrice.chotard@st.com>,
Maxime Coquelin <mcoquelin.stm32@gmail.com>,
Alexandre Torgue <alexandre.torgue@st.com>
Cc: <linux-remoteproc@vger.kernel.org>,
<linux-kernel@vger.kernel.org>,
<linux-arm-kernel@lists.infradead.org>,
<linux-stm32@st-md-mailman.stormreply.com>
Subject: Re: [PATCH v2] remoteproc: remove rproc_elf32_sanity_check
Date: Tue, 21 Apr 2020 10:30:19 -0500 [thread overview]
Message-ID: <a7994631-7a63-5477-df70-e40b995fe14f@ti.com> (raw)
In-Reply-To: <0fc07250-c62c-cb10-58e5-04ccdd6ee176@ti.com>
Hi Clement,
On 3/31/20 10:13 AM, Suman Anna wrote:
> On 3/31/20 3:33 AM, Clement Leger wrote:
>> Since checks are present in the remoteproc elf loader before calling
>> da_to_va, loading a elf64 will work on 32bits flavors of kernel.
>> Indeed, if a segment size is larger than what size_t can hold, the
>> loader will return an error so the functionality is equivalent to
>> what exists today.
>>
>> Signed-off-by: Clement Leger <cleger@kalray.eu>
>
> Acked-by: Suman Anna <s-anna@ti.com>
Can you repost this after rebasing on top of the rproc-next branch
which has the rproc_alloc refactoring changes pushed now?
regards
Suman
>
> regards
> Suman
>
>> ---
>> Changes from v1 -> v2:
>> - Remove possibity to override sanity_check operation
>>
>> drivers/remoteproc/remoteproc_core.c | 3 +--
>> drivers/remoteproc/remoteproc_elf_loader.c | 21 ---------------------
>> drivers/remoteproc/remoteproc_internal.h | 1 -
>> drivers/remoteproc/st_remoteproc.c | 2 +-
>> drivers/remoteproc/st_slim_rproc.c | 2 +-
>> drivers/remoteproc/stm32_rproc.c | 2 +-
>> 6 files changed, 4 insertions(+), 27 deletions(-)
>>
>> diff --git a/drivers/remoteproc/remoteproc_core.c b/drivers/remoteproc/remoteproc_core.c
>> index a9ac1d01e09b..191560048c1a 100644
>> --- a/drivers/remoteproc/remoteproc_core.c
>> +++ b/drivers/remoteproc/remoteproc_core.c
>> @@ -2068,8 +2068,7 @@ struct rproc *rproc_alloc(struct device *dev, const char *name,
>> rproc->ops->load = rproc_elf_load_segments;
>> rproc->ops->parse_fw = rproc_elf_load_rsc_table;
>> rproc->ops->find_loaded_rsc_table = rproc_elf_find_loaded_rsc_table;
>> - if (!rproc->ops->sanity_check)
>> - rproc->ops->sanity_check = rproc_elf32_sanity_check;
>> + rproc->ops->sanity_check = rproc_elf_sanity_check;
>> rproc->ops->get_boot_addr = rproc_elf_get_boot_addr;
>> }
>>
>> diff --git a/drivers/remoteproc/remoteproc_elf_loader.c b/drivers/remoteproc/remoteproc_elf_loader.c
>> index 16e2c496fd45..29034f99898d 100644
>> --- a/drivers/remoteproc/remoteproc_elf_loader.c
>> +++ b/drivers/remoteproc/remoteproc_elf_loader.c
>> @@ -112,27 +112,6 @@ int rproc_elf_sanity_check(struct rproc *rproc, const struct firmware *fw)
>> }
>> EXPORT_SYMBOL(rproc_elf_sanity_check);
>>
>> -/**
>> - * rproc_elf_sanity_check() - Sanity Check ELF32 firmware image
>> - * @rproc: the remote processor handle
>> - * @fw: the ELF32 firmware image
>> - *
>> - * Make sure this fw image is sane.
>> - */
>> -int rproc_elf32_sanity_check(struct rproc *rproc, const struct firmware *fw)
>> -{
>> - int ret = rproc_elf_sanity_check(rproc, fw);
>> -
>> - if (ret)
>> - return ret;
>> -
>> - if (fw_elf_get_class(fw) == ELFCLASS32)
>> - return 0;
>> -
>> - return -EINVAL;
>> -}
>> -EXPORT_SYMBOL(rproc_elf32_sanity_check);
>> -
>> /**
>> * rproc_elf_get_boot_addr() - Get rproc's boot address.
>> * @rproc: the remote processor handle
>> diff --git a/drivers/remoteproc/remoteproc_internal.h b/drivers/remoteproc/remoteproc_internal.h
>> index b389dc79da81..31994715fd43 100644
>> --- a/drivers/remoteproc/remoteproc_internal.h
>> +++ b/drivers/remoteproc/remoteproc_internal.h
>> @@ -54,7 +54,6 @@ void *rproc_da_to_va(struct rproc *rproc, u64 da, size_t len);
>> phys_addr_t rproc_va_to_pa(void *cpu_addr);
>> int rproc_trigger_recovery(struct rproc *rproc);
>>
>> -int rproc_elf32_sanity_check(struct rproc *rproc, const struct firmware *fw);
>> int rproc_elf_sanity_check(struct rproc *rproc, const struct firmware *fw);
>> u64 rproc_elf_get_boot_addr(struct rproc *rproc, const struct firmware *fw);
>> int rproc_elf_load_segments(struct rproc *rproc, const struct firmware *fw);
>> diff --git a/drivers/remoteproc/st_remoteproc.c b/drivers/remoteproc/st_remoteproc.c
>> index a6cbfa452764..a3268d95a50e 100644
>> --- a/drivers/remoteproc/st_remoteproc.c
>> +++ b/drivers/remoteproc/st_remoteproc.c
>> @@ -233,7 +233,7 @@ static const struct rproc_ops st_rproc_ops = {
>> .parse_fw = st_rproc_parse_fw,
>> .load = rproc_elf_load_segments,
>> .find_loaded_rsc_table = rproc_elf_find_loaded_rsc_table,
>> - .sanity_check = rproc_elf32_sanity_check,
>> + .sanity_check = rproc_elf_sanity_check,
>> .get_boot_addr = rproc_elf_get_boot_addr,
>> };
>>
>> diff --git a/drivers/remoteproc/st_slim_rproc.c b/drivers/remoteproc/st_slim_rproc.c
>> index 3cca8b65a8db..09bcb4d8b9e0 100644
>> --- a/drivers/remoteproc/st_slim_rproc.c
>> +++ b/drivers/remoteproc/st_slim_rproc.c
>> @@ -203,7 +203,7 @@ static const struct rproc_ops slim_rproc_ops = {
>> .da_to_va = slim_rproc_da_to_va,
>> .get_boot_addr = rproc_elf_get_boot_addr,
>> .load = rproc_elf_load_segments,
>> - .sanity_check = rproc_elf32_sanity_check,
>> + .sanity_check = rproc_elf_sanity_check,
>> };
>>
>> /**
>> diff --git a/drivers/remoteproc/stm32_rproc.c b/drivers/remoteproc/stm32_rproc.c
>> index 6a66dbf2df40..2e07a95439c8 100644
>> --- a/drivers/remoteproc/stm32_rproc.c
>> +++ b/drivers/remoteproc/stm32_rproc.c
>> @@ -505,7 +505,7 @@ static struct rproc_ops st_rproc_ops = {
>> .load = rproc_elf_load_segments,
>> .parse_fw = stm32_rproc_parse_fw,
>> .find_loaded_rsc_table = rproc_elf_find_loaded_rsc_table,
>> - .sanity_check = rproc_elf32_sanity_check,
>> + .sanity_check = rproc_elf_sanity_check,
>> .get_boot_addr = rproc_elf_get_boot_addr,
>> };
>>
>>
>
next prev parent reply other threads:[~2020-04-21 15:30 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-03-31 8:33 Clement Leger
2020-03-31 15:13 ` Suman Anna
2020-04-21 15:30 ` Suman Anna [this message]
2020-04-21 15:38 ` Clément Leger
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=a7994631-7a63-5477-df70-e40b995fe14f@ti.com \
--to=s-anna@ti.com \
--cc=alexandre.torgue@st.com \
--cc=bjorn.andersson@linaro.org \
--cc=cleger@kalray.eu \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-remoteproc@vger.kernel.org \
--cc=linux-stm32@st-md-mailman.stormreply.com \
--cc=mcoquelin.stm32@gmail.com \
--cc=ohad@wizery.com \
--cc=patrice.chotard@st.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®