From: Christophe Leroy <christophe.leroy@csgroup.eu>
To: Finn Thain <fthain@linux-m68k.org>,
Madhavan Srinivasan <maddy@linux.ibm.com>,
Michael Ellerman <mpe@ellerman.id.au>,
Nicholas Piggin <npiggin@gmail.com>
Cc: Cedar Maxwell <cedarmaxwell@mac.com>,
Stan Johnson <userm57@yahoo.com>,
"Dr. David Alan Gilbert" <linux@treblig.org>,
Benjamin Herrenschmidt <benh@kernel.crashing.org>,
stable@vger.kernel.org, linuxppc-dev@lists.ozlabs.org,
linux-kernel@vger.kernel.org
Subject: Re: [PATCH] powerpc: Use relocated font data pointer for btext_drawchar()
Date: Sun, 9 Nov 2025 10:48:17 +0100 [thread overview]
Message-ID: <a7d9feaa-3a52-4c72-be56-6757e75af2ac@csgroup.eu> (raw)
In-Reply-To: <d941a3221695e836963c8f9cb5fbb61e202bad0c.1762648546.git.fthain@linux-m68k.org>
Le 09/11/2025 à 01:35, Finn Thain a écrit :
> From: Christophe Leroy <christophe.leroy@csgroup.eu>
>
> Since Linux v6.7, booting using BootX on an Old World PowerMac produces
> an early crash. Stan Johnson writes, "the symptoms are that the screen
> goes blank and the backlight stays on, and the system freezes (Linux
> doesn't boot)."
> Further testing revealed that the failure can be avoided by disabling
> CONFIG_BOOTX_TEXT. Bisection revealed that the regression was caused by
> a patch which replaced the static btext font data with const data in a
> different compilation unit. To fix this, access the font data at its
> relocated address.
You can explain that characters start being displayed by bootx_init()
which is call very early in the boot before kernel text is relocated to
its final location. During that period, data is addressed with an offset
which is added to the Global Offset Table (GOT) entries at the start of
bootx_init() by fonction reloc_got2(). But the pointers that are located
inside a structure are not referenced in the GOT and are therefore not
updated by reloc_got2(). It is therefore needed to apply the offset
manually by using PTRRELOC() macro.
>
> Cc: Cedar Maxwell <cedarmaxwell@mac.com>
> Cc: Stan Johnson <userm57@yahoo.com>
> Cc: "Dr. David Alan Gilbert" <linux@treblig.org>
> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
> Cc: stable@vger.kernel.org
> Link: https://lists.debian.org/debian-powerpc/2025/10/msg00111.html
> Link: https://lore.kernel.org/linuxppc-dev/d81ddca8-c5ee-d583-d579-02b19ed95301@yahoo.com/
> Reported-by: Cedar Maxwell <cedarmaxwell@mac.com>
> Closes: https://lists.debian.org/debian-powerpc/2025/09/msg00031.html
> Bisected-by: Stan Johnson <userm57@yahoo.com>
> Tested-by: Stan Johnson <userm57@yahoo.com>
> Fixes: 0ebc7feae79a ("powerpc: Use shared font data")
> Signed-off-by: Finn Thain <fthain@linux-m68k.org>
>
> ---
>
> Christophe, as you're the author of this patch, this submission will
> probably need your sign-off.
I only suggested it, you authored the patch. Add me as:
Suggested-by: Christophe Leroy <christophe.leroy@csgroup.eu>
>
> ---
> arch/powerpc/kernel/btext.c | 3 ++-
> 1 file changed, 2 insertions(+), 1 deletion(-)
>
> diff --git a/arch/powerpc/kernel/btext.c b/arch/powerpc/kernel/btext.c
> index 7f63f1cdc6c3..ca00c4824e31 100644
> --- a/arch/powerpc/kernel/btext.c
> +++ b/arch/powerpc/kernel/btext.c
> @@ -20,6 +20,7 @@
> #include <asm/io.h>
> #include <asm/processor.h>
> #include <asm/udbg.h>
> +#include <asm/setup.h>
>
> #define NO_SCROLL
>
> @@ -463,7 +464,7 @@ static noinline void draw_byte(unsigned char c, long locX, long locY)
> {
> unsigned char *base = calc_base(locX << 3, locY << 4);
> unsigned int font_index = c * 16;
> - const unsigned char *font = font_sun_8x16.data + font_index;
> + const unsigned char *font = PTRRELOC(font_sun_8x16.data) + font_index;
> int rb = dispDeviceRowBytes;
>
> rmci_maybe_on();
prev parent reply other threads:[~2025-11-09 10:20 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-11-09 0:35 Finn Thain
2025-11-09 9:48 ` Christophe Leroy [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=a7d9feaa-3a52-4c72-be56-6757e75af2ac@csgroup.eu \
--to=christophe.leroy@csgroup.eu \
--cc=benh@kernel.crashing.org \
--cc=cedarmaxwell@mac.com \
--cc=fthain@linux-m68k.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux@treblig.org \
--cc=linuxppc-dev@lists.ozlabs.org \
--cc=maddy@linux.ibm.com \
--cc=mpe@ellerman.id.au \
--cc=npiggin@gmail.com \
--cc=stable@vger.kernel.org \
--cc=userm57@yahoo.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®