mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Zhou Yanjie <zhouyu@wanyeetech.com>
To: Aidan MacDonald <aidanmacdonald.0x0@gmail.com>,
	paul@crapouillou.net, linus.walleij@linaro.org
Cc: linux-mips@vger.kernel.org, linux-gpio@vger.kernel.org,
	linux-kernel@vger.kernel.org
Subject: Re: [PATCH v2] pinctrl: ingenic: Fix regmap on X series SoCs
Date: Tue, 8 Mar 2022 01:28:34 +0800	[thread overview]
Message-ID: <a8322347-602b-ce48-6b58-4ed77df8951c@wanyeetech.com> (raw)
In-Reply-To: <20220224145821.518835-1-aidanmacdonald.0x0@gmail.com>

Hi Aidan,

On 2022/2/24 下午10:58, Aidan MacDonald wrote:
> The X series Ingenic SoCs have a shadow GPIO group which is at a higher
> offset than the other groups, and is used for all GPIO configuration.
> The regmap did not take this offset into account and set max_register
> too low, so the regmap API blocked writes to the shadow group, which
> made the pinctrl driver unable to configure any pins.
>
> Fix this by adding regmap access tables to the chip info.
>
> Signed-off-by: Aidan MacDonald <aidanmacdonald.0x0@gmail.com>
> ---
> v1: https://lore.kernel.org/linux-mips/20220209230452.19535-1-aidanmacdonald.0x0@gmail.com/
>
>   drivers/pinctrl/pinctrl-ingenic.c | 53 ++++++++++++++++++++++++++++++-
>   1 file changed, 52 insertions(+), 1 deletion(-)


Tested-by: 周琰杰 (Zhou Yanjie) <zhouyanjie@wanyeetech.com>


>
> diff --git a/drivers/pinctrl/pinctrl-ingenic.c b/drivers/pinctrl/pinctrl-ingenic.c
> index 2712f51eb238..074c94edd90b 100644
> --- a/drivers/pinctrl/pinctrl-ingenic.c
> +++ b/drivers/pinctrl/pinctrl-ingenic.c
> @@ -119,6 +119,9 @@ struct ingenic_chip_info {
>   	unsigned int num_functions;
>   
>   	const u32 *pull_ups, *pull_downs;
> +
> +	unsigned int max_register;
> +	const struct regmap_access_table* access_table;
>   };
>   
>   struct ingenic_pinctrl {
> @@ -228,6 +231,7 @@ static const struct ingenic_chip_info jz4730_chip_info = {
>   	.num_functions = ARRAY_SIZE(jz4730_functions),
>   	.pull_ups = jz4730_pull_ups,
>   	.pull_downs = jz4730_pull_downs,
> +	.max_register = 4 * 0x30 - 4,
>   };
>   
>   static const u32 jz4740_pull_ups[4] = {
> @@ -337,6 +341,7 @@ static const struct ingenic_chip_info jz4740_chip_info = {
>   	.num_functions = ARRAY_SIZE(jz4740_functions),
>   	.pull_ups = jz4740_pull_ups,
>   	.pull_downs = jz4740_pull_downs,
> +	.max_register = 4 * 0x100 - 4,
>   };
>   
>   static int jz4725b_mmc0_1bit_pins[] = { 0x48, 0x49, 0x5c, };
> @@ -439,6 +444,7 @@ static const struct ingenic_chip_info jz4725b_chip_info = {
>   	.num_functions = ARRAY_SIZE(jz4725b_functions),
>   	.pull_ups = jz4740_pull_ups,
>   	.pull_downs = jz4740_pull_downs,
> +	.max_register = 4 * 0x100 - 4,
>   };
>   
>   static const u32 jz4750_pull_ups[6] = {
> @@ -576,6 +582,7 @@ static const struct ingenic_chip_info jz4750_chip_info = {
>   	.num_functions = ARRAY_SIZE(jz4750_functions),
>   	.pull_ups = jz4750_pull_ups,
>   	.pull_downs = jz4750_pull_downs,
> +	.max_register = 6 * 0x100 - 4,
>   };
>   
>   static const u32 jz4755_pull_ups[6] = {
> @@ -741,6 +748,7 @@ static const struct ingenic_chip_info jz4755_chip_info = {
>   	.num_functions = ARRAY_SIZE(jz4755_functions),
>   	.pull_ups = jz4755_pull_ups,
>   	.pull_downs = jz4755_pull_downs,
> +	.max_register = 6 * 0x100 - 4,
>   };
>   
>   static const u32 jz4760_pull_ups[6] = {
> @@ -1089,6 +1097,7 @@ static const struct ingenic_chip_info jz4760_chip_info = {
>   	.num_functions = ARRAY_SIZE(jz4760_functions),
>   	.pull_ups = jz4760_pull_ups,
>   	.pull_downs = jz4760_pull_downs,
> +	.max_register = 6 * 0x100 - 4,
>   };
>   
>   static const u32 jz4770_pull_ups[6] = {
> @@ -1429,6 +1438,7 @@ static const struct ingenic_chip_info jz4770_chip_info = {
>   	.num_functions = ARRAY_SIZE(jz4770_functions),
>   	.pull_ups = jz4770_pull_ups,
>   	.pull_downs = jz4770_pull_downs,
> +	.max_register = 6 * 0x100 - 4,
>   };
>   
>   static const u32 jz4775_pull_ups[7] = {
> @@ -1702,6 +1712,7 @@ static const struct ingenic_chip_info jz4775_chip_info = {
>   	.num_functions = ARRAY_SIZE(jz4775_functions),
>   	.pull_ups = jz4775_pull_ups,
>   	.pull_downs = jz4775_pull_downs,
> +	.max_register = 7 * 0x100 - 4,
>   };
>   
>   static const u32 jz4780_pull_ups[6] = {
> @@ -1966,6 +1977,7 @@ static const struct ingenic_chip_info jz4780_chip_info = {
>   	.num_functions = ARRAY_SIZE(jz4780_functions),
>   	.pull_ups = jz4780_pull_ups,
>   	.pull_downs = jz4780_pull_downs,
> +	.max_register = 6 * 0x100 - 4,
>   };
>   
>   static const u32 x1000_pull_ups[4] = {
> @@ -2179,6 +2191,17 @@ static const struct function_desc x1000_functions[] = {
>   	{ "mac", x1000_mac_groups, ARRAY_SIZE(x1000_mac_groups), },
>   };
>   
> +static const struct regmap_range x1000_access_ranges[] = {
> +	regmap_reg_range(0x000, 0x400 - 4),
> +	regmap_reg_range(0x700, 0x800 - 4),
> +};
> +
> +/* shared with X1500 */
> +static const struct regmap_access_table x1000_access_table = {
> +	.yes_ranges = x1000_access_ranges,
> +	.n_yes_ranges = ARRAY_SIZE(x1000_access_ranges),
> +};
> +
>   static const struct ingenic_chip_info x1000_chip_info = {
>   	.num_chips = 4,
>   	.reg_offset = 0x100,
> @@ -2189,6 +2212,7 @@ static const struct ingenic_chip_info x1000_chip_info = {
>   	.num_functions = ARRAY_SIZE(x1000_functions),
>   	.pull_ups = x1000_pull_ups,
>   	.pull_downs = x1000_pull_downs,
> +	.access_table = &x1000_access_table,
>   };
>   
>   static int x1500_uart0_data_pins[] = { 0x4a, 0x4b, };
> @@ -2300,6 +2324,7 @@ static const struct ingenic_chip_info x1500_chip_info = {
>   	.num_functions = ARRAY_SIZE(x1500_functions),
>   	.pull_ups = x1000_pull_ups,
>   	.pull_downs = x1000_pull_downs,
> +	.access_table = &x1000_access_table,
>   };
>   
>   static const u32 x1830_pull_ups[4] = {
> @@ -2506,6 +2531,16 @@ static const struct function_desc x1830_functions[] = {
>   	{ "mac", x1830_mac_groups, ARRAY_SIZE(x1830_mac_groups), },
>   };
>   
> +static const struct regmap_range x1830_access_ranges[] = {
> +	regmap_reg_range(0x0000, 0x4000 - 4),
> +	regmap_reg_range(0x7000, 0x8000 - 4),
> +};
> +
> +static const struct regmap_access_table x1830_access_table = {
> +	.yes_ranges = x1830_access_ranges,
> +	.n_yes_ranges = ARRAY_SIZE(x1830_access_ranges),
> +};
> +
>   static const struct ingenic_chip_info x1830_chip_info = {
>   	.num_chips = 4,
>   	.reg_offset = 0x1000,
> @@ -2516,6 +2551,7 @@ static const struct ingenic_chip_info x1830_chip_info = {
>   	.num_functions = ARRAY_SIZE(x1830_functions),
>   	.pull_ups = x1830_pull_ups,
>   	.pull_downs = x1830_pull_downs,
> +	.access_table = &x1830_access_table,
>   };
>   
>   static const u32 x2000_pull_ups[5] = {
> @@ -2969,6 +3005,17 @@ static const struct function_desc x2000_functions[] = {
>   	{ "otg", x2000_otg_groups, ARRAY_SIZE(x2000_otg_groups), },
>   };
>   
> +static const struct regmap_range x2000_access_ranges[] = {
> +	regmap_reg_range(0x000, 0x500 - 4),
> +	regmap_reg_range(0x700, 0x800 - 4),
> +};
> +
> +/* shared with X2100 */
> +static const struct regmap_access_table x2000_access_table = {
> +	.yes_ranges = x2000_access_ranges,
> +	.n_yes_ranges = ARRAY_SIZE(x2000_access_ranges),
> +};
> +
>   static const struct ingenic_chip_info x2000_chip_info = {
>   	.num_chips = 5,
>   	.reg_offset = 0x100,
> @@ -2979,6 +3026,7 @@ static const struct ingenic_chip_info x2000_chip_info = {
>   	.num_functions = ARRAY_SIZE(x2000_functions),
>   	.pull_ups = x2000_pull_ups,
>   	.pull_downs = x2000_pull_downs,
> +	.access_table = &x2000_access_table,
>   };
>   
>   static const u32 x2100_pull_ups[5] = {
> @@ -3189,6 +3237,7 @@ static const struct ingenic_chip_info x2100_chip_info = {
>   	.num_functions = ARRAY_SIZE(x2100_functions),
>   	.pull_ups = x2100_pull_ups,
>   	.pull_downs = x2100_pull_downs,
> +	.access_table = &x2000_access_table,
>   };
>   
>   static u32 ingenic_gpio_read_reg(struct ingenic_gpio_chip *jzgc, u8 reg)
> @@ -4168,7 +4217,9 @@ static int __init ingenic_pinctrl_probe(struct platform_device *pdev)
>   		return PTR_ERR(base);
>   
>   	regmap_config = ingenic_pinctrl_regmap_config;
> -	regmap_config.max_register = chip_info->num_chips * chip_info->reg_offset;
> +	regmap_config.rd_table = chip_info->access_table;
> +	regmap_config.wr_table = chip_info->access_table;
> +	regmap_config.max_register = chip_info->max_register;
>   
>   	jzpc->map = devm_regmap_init_mmio(dev, base, &regmap_config);
>   	if (IS_ERR(jzpc->map)) {

  reply	other threads:[~2022-03-07 17:28 UTC|newest]

Thread overview: 3+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-02-24 14:58 Aidan MacDonald
2022-03-07 17:28 ` Zhou Yanjie [this message]
2022-03-07 17:35 ` Paul Cercueil

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=a8322347-602b-ce48-6b58-4ed77df8951c@wanyeetech.com \
    --to=zhouyu@wanyeetech.com \
    --cc=aidanmacdonald.0x0@gmail.com \
    --cc=linus.walleij@linaro.org \
    --cc=linux-gpio@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mips@vger.kernel.org \
    --cc=paul@crapouillou.net \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®