From: Oleksandr Tyshchenko <Oleksandr_Tyshchenko@epam.com>
To: Juergen Gross <jgross@suse.com>,
"linux-kernel@vger.kernel.org" <linux-kernel@vger.kernel.org>
Cc: Stefano Stabellini <sstabellini@kernel.org>,
"xen-devel@lists.xenproject.org" <xen-devel@lists.xenproject.org>
Subject: Re: [PATCH 1/3] xen/virtio: restructure xen grant dma setup
Date: Thu, 6 Oct 2022 16:35:16 +0000 [thread overview]
Message-ID: <a8482a7b-0d89-861d-bc87-632d3230c173@epam.com> (raw)
In-Reply-To: <20221006071500.15689-2-jgross@suse.com>
On 06.10.22 10:14, Juergen Gross wrote:
Hello Juergen
> In order to prepare supporting other means than device tree for
> setting up virtio devices under Xen, restructure the functions
> xen_is_grant_dma_device() and xen_grant_setup_dma_ops() a little bit.
>
> Signed-off-by: Juergen Gross <jgross@suse.com>
Patch looks good,
one NIT, xen_dt_grant_setup_dma_ops() down the code doesn't actually
setup DMA OPS, it retrieves the backend domid via device-tree means and
stores it,
so I would rename to it, maybe something like
xen_dt_grant_setup_backend_domid() or xen_dt_grant_init_backend_domid(),
but I am not sure it would be good alternative.
So, w/ or w/o renaming:
Reviewed-by: Oleksandr Tyshchenko <oleksandr_tyshchenko@epam.com>
also
Tested-by: Oleksandr Tyshchenko <oleksandr_tyshchenko@epam.com> # Arm64
only
> ---
> drivers/xen/grant-dma-ops.c | 68 +++++++++++++++++++++++--------------
> 1 file changed, 43 insertions(+), 25 deletions(-)
>
> diff --git a/drivers/xen/grant-dma-ops.c b/drivers/xen/grant-dma-ops.c
> index 8973fc1e9ccc..f29759d5301f 100644
> --- a/drivers/xen/grant-dma-ops.c
> +++ b/drivers/xen/grant-dma-ops.c
> @@ -273,22 +273,28 @@ static const struct dma_map_ops xen_grant_dma_ops = {
> .dma_supported = xen_grant_dma_supported,
> };
>
> -bool xen_is_grant_dma_device(struct device *dev)
> +static bool xen_is_dt_grant_dma_device(struct device *dev)
> {
> struct device_node *iommu_np;
> bool has_iommu;
>
> - /* XXX Handle only DT devices for now */
> - if (!dev->of_node)
> - return false;
> -
> iommu_np = of_parse_phandle(dev->of_node, "iommus", 0);
> - has_iommu = iommu_np && of_device_is_compatible(iommu_np, "xen,grant-dma");
> + has_iommu = iommu_np &&
> + of_device_is_compatible(iommu_np, "xen,grant-dma");
> of_node_put(iommu_np);
>
> return has_iommu;
> }
>
> +bool xen_is_grant_dma_device(struct device *dev)
> +{
> + /* XXX Handle only DT devices for now */
> + if (dev->of_node)
> + return xen_is_dt_grant_dma_device(dev);
> +
> + return false;
> +}
> +
> bool xen_virtio_mem_acc(struct virtio_device *dev)
> {
> if (IS_ENABLED(CONFIG_XEN_VIRTIO_FORCE_GRANT))
> @@ -297,45 +303,56 @@ bool xen_virtio_mem_acc(struct virtio_device *dev)
> return xen_is_grant_dma_device(dev->dev.parent);
> }
>
> -void xen_grant_setup_dma_ops(struct device *dev)
> +static int xen_dt_grant_setup_dma_ops(struct device *dev,
> + struct xen_grant_dma_data *data)
> {
> - struct xen_grant_dma_data *data;
> struct of_phandle_args iommu_spec;
>
> - data = find_xen_grant_dma_data(dev);
> - if (data) {
> - dev_err(dev, "Xen grant DMA data is already created\n");
> - return;
> - }
> -
> - /* XXX ACPI device unsupported for now */
> - if (!dev->of_node)
> - goto err;
> -
> if (of_parse_phandle_with_args(dev->of_node, "iommus", "#iommu-cells",
> 0, &iommu_spec)) {
> dev_err(dev, "Cannot parse iommus property\n");
> - goto err;
> + return -ESRCH;
> }
>
> if (!of_device_is_compatible(iommu_spec.np, "xen,grant-dma") ||
> iommu_spec.args_count != 1) {
> dev_err(dev, "Incompatible IOMMU node\n");
> of_node_put(iommu_spec.np);
> - goto err;
> + return -ESRCH;
> }
>
> of_node_put(iommu_spec.np);
>
> + /*
> + * The endpoint ID here means the ID of the domain where the
> + * corresponding backend is running
> + */
> + data->backend_domid = iommu_spec.args[0];
> +
> + return 0;
> +}
> +
> +void xen_grant_setup_dma_ops(struct device *dev)
> +{
> + struct xen_grant_dma_data *data;
> +
> + data = find_xen_grant_dma_data(dev);
> + if (data) {
> + dev_err(dev, "Xen grant DMA data is already created\n");
> + return;
> + }
> +
> data = devm_kzalloc(dev, sizeof(*data), GFP_KERNEL);
> if (!data)
> goto err;
>
> - /*
> - * The endpoint ID here means the ID of the domain where the corresponding
> - * backend is running
> - */
> - data->backend_domid = iommu_spec.args[0];
> + if (dev->of_node) {
> + if (xen_dt_grant_setup_dma_ops(dev, data))
> + goto err;
> + } else {
> + /* XXX ACPI device unsupported for now */
> + goto err;
> + }
>
> if (xa_err(xa_store(&xen_grant_dma_devices, (unsigned long)dev, data,
> GFP_KERNEL))) {
> @@ -348,6 +365,7 @@ void xen_grant_setup_dma_ops(struct device *dev)
> return;
>
> err:
> + devm_kfree(dev, data);
> dev_err(dev, "Cannot set up Xen grant DMA ops, retain platform DMA ops\n");
> }
>
--
Regards,
Oleksandr Tyshchenko
next prev parent reply other threads:[~2022-10-06 16:35 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-10-06 7:14 [PATCH 0/3] xen/virtio: support grant based virtio on x86 Juergen Gross
2022-10-06 7:14 ` [PATCH 1/3] xen/virtio: restructure xen grant dma setup Juergen Gross
2022-10-06 16:35 ` Oleksandr Tyshchenko [this message]
2022-10-07 0:23 ` Stefano Stabellini
2022-10-07 4:35 ` Juergen Gross
2022-10-06 7:14 ` [PATCH 2/3] xen/virtio: use dom0 as default backend for CONFIG_XEN_VIRTIO_FORCE_GRANT Juergen Gross
2022-10-06 17:23 ` Oleksandr Tyshchenko
2022-10-07 0:23 ` Stefano Stabellini
2022-10-06 7:15 ` [PATCH 3/3] xen/virtio: enable grant based virtio on x86 Juergen Gross
2022-10-06 16:04 ` Oleksandr Tyshchenko
2022-10-07 4:31 ` Juergen Gross
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=a8482a7b-0d89-861d-bc87-632d3230c173@epam.com \
--to=oleksandr_tyshchenko@epam.com \
--cc=jgross@suse.com \
--cc=linux-kernel@vger.kernel.org \
--cc=sstabellini@kernel.org \
--cc=xen-devel@lists.xenproject.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®