Re: [PATCH v4] platform/x86: add lenovo generic wmi driver

[Armin Wolf <W_Armin@gmx.de>]

Am 05.03.24 um 15:48 schrieb Thomas Weißschuh:

> On Tue, Mar 05, 2024 at 08:13:15PM +0800, Ai Chao wrote:
>> Add lenovo generic wmi driver to support camera button.
>> The Camera button is a GPIO device. This driver receives ACPI notifyi
>>   when the button pressed.
> the button *is* pressed.
>
>
> The subject does not mention that it is only about te camera button.
>
> I would be interested on which devices this driver was tested and is
> expected to work with.
>
>> Signed-off-by: Ai Chao <aichao@kylinos.cn>
>> ---
>> v4: Remove lenovo_wmi_input_setup, move camera_mode into struct lenovo_wmi_priv.
>> v3: Remove lenovo_wmi_remove function.
>> v2: Adjust GPL v2 to GPL, adjust sprintf to sysfs_emit.
>>
>>   drivers/platform/x86/Kconfig             |  12 +++
>>   drivers/platform/x86/Makefile            |   1 +
>>   drivers/platform/x86/lenovo-wmi-camera.c | 118 +++++++++++++++++++++++
>>   3 files changed, 131 insertions(+)
>>   create mode 100644 drivers/platform/x86/lenovo-wmi-camera.c
>>
>> diff --git a/drivers/platform/x86/Kconfig b/drivers/platform/x86/Kconfig
>> index bdd302274b9a..079f5aa5910c 100644
>> --- a/drivers/platform/x86/Kconfig
>> +++ b/drivers/platform/x86/Kconfig
>> @@ -1001,6 +1001,18 @@ config INSPUR_PLATFORM_PROFILE
>>   	To compile this driver as a module, choose M here: the module
>>   	will be called inspur-platform-profile.
>>
>> +config LENOVO_WMI_CAMERA
>> +	tristate "Lenovo WMI Camera Button driver"
>> +	depends on ACPI_WMI
>> +	depends on INPUT
>> +	help
>> +	  This driver provides support for Lenovo camera button. The Camera
>> +	  button is a GPIO device. This driver receives ACPI notify when the
>> +	  button pressed.
>> +
>> +	  To compile this driver as a module, choose M here: the module
>> +	  will be called lenovo-wmi-camera.
>> +
>>   source "drivers/platform/x86/x86-android-tablets/Kconfig"
>>
>>   config FW_ATTR_CLASS
>> diff --git a/drivers/platform/x86/Makefile b/drivers/platform/x86/Makefile
>> index 1de432e8861e..217e94d7c877 100644
>> --- a/drivers/platform/x86/Makefile
>> +++ b/drivers/platform/x86/Makefile
>> @@ -66,6 +66,7 @@ obj-$(CONFIG_SENSORS_HDAPS)	+= hdaps.o
>>   obj-$(CONFIG_THINKPAD_ACPI)	+= thinkpad_acpi.o
>>   obj-$(CONFIG_THINKPAD_LMI)	+= think-lmi.o
>>   obj-$(CONFIG_YOGABOOK)		+= lenovo-yogabook.o
>> +obj-$(CONFIG_LENOVO_WMI_CAMERA)	+= lenovo-wmi-camera.o
>>
>>   # Intel
>>   obj-y				+= intel/
>> diff --git a/drivers/platform/x86/lenovo-wmi-camera.c b/drivers/platform/x86/lenovo-wmi-camera.c
>> new file mode 100644
>> index 000000000000..77084266829c
>> --- /dev/null
>> +++ b/drivers/platform/x86/lenovo-wmi-camera.c
>> @@ -0,0 +1,118 @@
>> +// SPDX-License-Identifier: GPL-2.0
>> +/*
>> + * Lenovo WMI Camera Button Driver
>> + *
>> + * Author: Ai Chao <aichao@kylinos.cn>
>> + * Copyright (C) 2024 KylinSoft Corporation.
>> + */
>> +
>> +#include <linux/acpi.h>
>> +#include <linux/device.h>
>> +#include <linux/input.h>
>> +#include <linux/module.h>
>> +#include <linux/wmi.h>
>> +
>> +#define WMI_LENOVO_CAMERABUTTON_EVENT_GUID "50C76F1F-D8E4-D895-0A3D-62F4EA400013"
>> +
>> +struct lenovo_wmi_priv {
>> +	struct input_dev *idev;
>> +	struct device *dev;
>> +	u8 camera_mode;
>> +};
>> +
>> +enum {
>> +	CAMERA_BUTTON_PRESSED = 1,
>> +};
>> +
>> +static ssize_t camerabutton_show(struct device *dev,
>> +				 struct device_attribute *attr, char *buf)
>> +{
>> +	struct lenovo_wmi_priv *priv = dev_get_drvdata(dev);
>> +
>> +	return sysfs_emit(buf, "%u\n", priv->camera_mode);
>> +}
>> +DEVICE_ATTR_RO(camerabutton);
>> +
>> +static struct attribute *lenovo_wmi_attrs[] = {
>> +	&dev_attr_camerabutton.attr,
>> +	NULL,
> No trailing comma after sentinel elements.
>
>> +};
>> +
>> +static const struct attribute_group lenovo_wmi_group = {
>> +	.attrs = lenovo_wmi_attrs,
>> +};
>> +
>> +const struct attribute_group *lenovo_wmi_groups[] = {
>> +	&lenovo_wmi_group,
>> +	NULL,
> Also no trailing comma.
>
>> +};
>> +
>> +static void lenovo_wmi_notify(struct wmi_device *wdev, union acpi_object *obj)
>> +{
>> +	struct lenovo_wmi_priv *priv = dev_get_drvdata(&wdev->dev);
>> +
>> +	if (obj->type == ACPI_TYPE_BUFFER &&
>> +	    obj->buffer.pointer[0] <= CAMERA_BUTTON_PRESSED) {
>> +		/* Camera mode:
>> +		 *      0 camera close
>> +		 *      1 camera open
>> +		 */
>> +		priv->camera_mode = obj->buffer.pointer[0];
> This looks similar to a switch.
> Would it be more useful for the user to report a standard switch instead
> of a key event which needs to be correlated with the sysfs file?

I agree, maybe SW_CAMERA_LENS_COVER might be the right thing to use here,
if those camera states (open/closed) are meant to symbolize camera shutter states.

In such a case the initial switch state has to be retrieved, or else the input device
cannot be registered until the first event is received (similar how the hp-wmi driver
handles SW_CAMERA_LENS_COVER events).

Ai Chao, can you tell us if those two camera states are meant to act like a switch (camera switched off,
camera switched on) or meant to act like a key (camera button pressed, camera button released)?

>> +
>> +		input_report_key(priv->idev, KEY_CAMERA, 1);
>> +		input_sync(priv->idev);
>> +		input_report_key(priv->idev, KEY_CAMERA, 0);
>> +		input_sync(priv->idev);
>> +	} else {
>> +		dev_dbg(&wdev->dev, "Bad response type %d\n", obj->type);
>> +	}
>> +}
>> +
>> +static int lenovo_wmi_probe(struct wmi_device *wdev, const void *context)
>> +{
>> +	struct lenovo_wmi_priv *priv;
>> +
>> +	priv = devm_kzalloc(&wdev->dev, sizeof(*priv),
>> +			    GFP_KERNEL);
>> +	if (!priv)
>> +		return -ENOMEM;
>> +
>> +	dev_set_drvdata(&wdev->dev, priv);
>> +
>> +	priv->idev = devm_input_allocate_device(&wdev->dev);
>> +	if (!priv->idev)
>> +		return -ENOMEM;
>> +
>> +	priv->idev->name = "Lenovo WMI Camera Button";
>> +	priv->idev->phys = "wmi/input0";
>> +	priv->idev->id.bustype = BUS_HOST;
>> +	priv->idev->dev.parent = &wdev->dev;
>> +	set_bit(EV_KEY, priv->idev->evbit);
>> +	set_bit(KEY_CAMERA, priv->idev->keybit);
> input_set_capability()?
>
>> +
>> +	return input_register_device(priv->idev);
>> +}
>> +
>> +static const struct wmi_device_id lenovo_wmi_id_table[] = {
>> +	{ .guid_string = WMI_LENOVO_CAMERABUTTON_EVENT_GUID },
>> +	{  }
>> +};
>> +
>> +static struct wmi_driver lenovo_wmi_driver = {
>> +	.driver = {
>> +		.name = "lenovo-wmi-camera",
>> +		.dev_groups = lenovo_wmi_groups,
>> +		.probe_type = PROBE_PREFER_ASYNCHRONOUS,
>> +	},
>> +	.id_table = lenovo_wmi_id_table,
>> +	.no_singleton = false,

The correct setting in this case would be ".no_singleton = true",
since camera_mode now lives inside struct lenovo_wmi_priv.

Thanks,
Armin Wolf

>> +	.probe = lenovo_wmi_probe,
>> +	.notify = lenovo_wmi_notify,
>> +};
>> +
>> +module_wmi_driver(lenovo_wmi_driver);
>> +
>> +MODULE_DEVICE_TABLE(wmi, lenovo_wmi_id_table);
>> +MODULE_AUTHOR("Ai Chao <aichao@kylinos.cn>");
>> +MODULE_DESCRIPTION("Lenovo Generic WMI Driver");
>> +MODULE_LICENSE("GPL");
>> --
>> 2.25.1
>>