Re: [PATCH 1/4] arm64: dts: ti: k3-j721s2-main: Add mmio-sram node to main_navss

[Brandon Brnich <b-brnich@ti.com>]

Hi Vignesh,

On 3/9/26 02:27, Vignesh Raghavendra wrote:
> 
> 
> On 02/03/26 23:47, Brandon Brnich wrote:
>> The NavigatorSS (NAVSS) address space contains a 64 KiB on-chip SRAM
>> region at its base address. Add an mmio-sram node to expose this region
>> to consumers via the generic SRAM allocator API.
>>
>> Signed-off-by: Brandon Brnich <b-brnich@ti.com>
>> ---
>>   arch/arm64/boot/dts/ti/k3-j721s2-main.dtsi | 8 ++++++++
>>   1 file changed, 8 insertions(+)
>>
>> diff --git a/arch/arm64/boot/dts/ti/k3-j721s2-main.dtsi b/arch/arm64/boot/dts/ti/k3-j721s2-main.dtsi
>> index 80c51b11ac9f..7b1ba34ab719 100644
>> --- a/arch/arm64/boot/dts/ti/k3-j721s2-main.dtsi
>> +++ b/arch/arm64/boot/dts/ti/k3-j721s2-main.dtsi
>> @@ -785,6 +785,14 @@ main_navss: bus@30000000 {
>>   		dma-coherent;
>>   		dma-ranges;
>>   
>> +		main_navss_sram: navss-sram@30000000 {
> 
> This fails make dtbs_check

I ran kpv but must be having configuration issues because all of these 
cases passed. I will fixup the node and send a v2 shortly.

Best,
Brandon

> 
>> +			compatible = "mmio-sram";
>> +			reg = <0x00 0x30000000 0x00 0x10000>;
>> +			#address-cells = <1>;
>> +			#size-cells = <1>;
>> +			ranges = <0x0 0x00 0x30000000 0x10000>;
>> +		};
>> +
>>   		main_navss_intr: interrupt-controller@310e0000 {
>>   			compatible = "ti,sci-intr";
>>   			reg = <0x00 0x310e0000 0x00 0x4000>;
>