From: Thomas Zimmermann <tzimmermann@suse.de>
To: Icenowy Zheng <zhengxingda@iscas.ac.cn>,
Maarten Lankhorst <maarten.lankhorst@linux.intel.com>,
Maxime Ripard <mripard@kernel.org>
Cc: David Airlie <airlied@gmail.com>, Simona Vetter <simona@ffwll.ch>,
Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>,
Joey Lu <a0987203069@gmail.com>, Han Gao <gaohan@iscas.ac.cn>,
dri-devel@lists.freedesktop.org, linux-kernel@vger.kernel.org
Subject: Re: [PATCH v2 2/4] drm/verisilicon: nuke planes' atomic_enable hooks
Date: Tue, 17 Nov 2026 08:25:07 +0100 [thread overview]
Message-ID: <a96e7813-6918-44f5-82e2-ca40051abea0@suse.de> (raw)
In-Reply-To: <7e4b4fd185f47404bb5f18e7c2c8086d24e673f4.camel@iscas.ac.cn>
Hi
Am 17.11.26 um 06:19 schrieb Icenowy Zheng:
[...]
>>> Sure, but is that a problem for this hardware?
>> For the cursor plane, the unchecked coordinate might be improper for
>> the registers.
>>
>> For the primary plane, if the plane is found to be totally off by
>> drm_atomic_helper_check_plane_state(), the check for can_position,
>> which is below the code snippet I referenced, would be bypassed, and
>> such plane would be programmed to be visible by the atomic_update
>> hook
>> even if it shouldn't be visible.
> Well I am now thinking that bound-but-invisible situation is commonly
> ignored by drivers.
>
> For drm/verisilicon, maybe I'd remove both atomic_disable and
> atomic_enable; however I think the atomic helpers may need some flag to
> consider bound-but-invisible planes when calling atomic_{dis,en}able.
I don't think I really understand what you're up to, but it seems you're
overthinking the whole thing. Other drivers only care about plane on/off
and the contained image. That's also what the 3 callbacks are for. It
usually works nicely. Hence me asking. But maybe verisilicon is
different, IDK.
My suggestion is therefore to remove _enable and _disable and keep all
logic in _update.
atomic_update()
{
if (plane_state->visible) {
// do update
// enable hw plane
} else {
// disable hw plane
}
}
If you have any special cases where you want visible to be false (or
true), detect them in atomic_check and set the flags accordingly.
atomic_check()
{
drm_atomic_helper_check_plane_state() if (awkward coords)
plane_state->visible = false;
}
Best regards
Thomas
>
> Thanks,
> Icenowy
>
>> Thanks,
>> Icenowy
>>
>>> Best regards
>>> Thomas
>>>
>>>> The end of drm_atomic_helper_check_plane_state() says:
>>>>
>>>> ```
>>>> if (!plane_state->visible)
>>>> /*
>>>> * Plane isn't visible; some drivers can handle
>>>> this
>>>> * so we just return success here. Drivers that
>>>> can't
>>>> * (including those that use the primary plane
>>>> helper's
>>>> * update function) will return an error from
>>>> their
>>>> * update_plane handler.
>>>> */
>>>> return 0;
>>>> ```
>>>>
>>>> Thanks,
>>>> Icenowy
>>>>
>>>>> [1]
>>>>> https://elixir.bootlin.com/linux/v7.3.1/source/drivers/gpu/drm/drm_atomic_helper.c#L3030
>>>>>
>>>>> Best regards
>>>>> Thomas
>>>>>
>>>>>> };
>>>>>>
>>>>>> diff --git a/drivers/gpu/drm/verisilicon/vs_primary_plane.c
>>>>>> b/drivers/gpu/drm/verisilicon/vs_primary_plane.c
>>>>>> index 8e94491693019..fca692f4f7d5c 100644
>>>>>> --- a/drivers/gpu/drm/verisilicon/vs_primary_plane.c
>>>>>> +++ b/drivers/gpu/drm/verisilicon/vs_primary_plane.c
>>>>>> @@ -59,25 +59,6 @@ static void vs_primary_plane_commit(struct
>>>>>> vs_dc
>>>>>> *dc, unsigned int output)
>>>>>> VSDC_FB_CONFIG_EX_COMMIT);
>>>>>> }
>>>>>>
>>>>>> -static void vs_primary_plane_atomic_enable(struct drm_plane
>>>>>> *plane,
>>>>>> - struct
>>>>>> drm_atomic_commit *atomic_state)
>>>>>> -{
>>>>>> - struct drm_plane_state *state =
>>>>>> drm_atomic_get_new_plane_state(atomic_state,
>>>>>> -
>>>>>>
>>>>>> plane);
>>>>>> - struct drm_crtc *crtc = state->crtc;
>>>>>> - struct vs_crtc *vcrtc = drm_crtc_to_vs_crtc(crtc);
>>>>>> - unsigned int output = vcrtc->id;
>>>>>> - struct vs_dc *dc = vcrtc->dc;
>>>>>> -
>>>>>> - regmap_set_bits(dc->regs, VSDC_FB_CONFIG_EX(output),
>>>>>> - VSDC_FB_CONFIG_EX_FB_EN);
>>>>>> - regmap_update_bits(dc->regs,
>>>>>> VSDC_FB_CONFIG_EX(output),
>>>>>> -
>>>>>> VSDC_FB_CONFIG_EX_DISPLAY_ID_MASK,
>>>>>> -
>>>>>> VSDC_FB_CONFIG_EX_DISPLAY_ID(output));
>>>>>> -
>>>>>> - vs_primary_plane_commit(dc, output);
>>>>>> -}
>>>>>> -
>>>>>> static void vs_primary_plane_atomic_disable(struct
>>>>>> drm_plane
>>>>>> *plane,
>>>>>> struct
>>>>>> drm_atomic_commit *atomic_state)
>>>>>> {
>>>>>> @@ -144,13 +125,18 @@ static void
>>>>>> vs_primary_plane_atomic_update(struct drm_plane *plane,
>>>>>> regmap_write(dc->regs, VSDC_FB_BLEND_CONFIG(output),
>>>>>> VSDC_FB_BLEND_CONFIG_BLEND_DISABLE);
>>>>>>
>>>>>> + regmap_set_bits(dc->regs, VSDC_FB_CONFIG_EX(output),
>>>>>> + VSDC_FB_CONFIG_EX_FB_EN);
>>>>>> + regmap_update_bits(dc->regs,
>>>>>> VSDC_FB_CONFIG_EX(output),
>>>>>> +
>>>>>> VSDC_FB_CONFIG_EX_DISPLAY_ID_MASK,
>>>>>> +
>>>>>> VSDC_FB_CONFIG_EX_DISPLAY_ID(output));
>>>>>> +
>>>>>> vs_primary_plane_commit(dc, output);
>>>>>> }
>>>>>>
>>>>>> static const struct drm_plane_helper_funcs
>>>>>> vs_primary_plane_helper_funcs = {
>>>>>> .atomic_check = vs_primary_plane_atomic_check,
>>>>>> .atomic_update = vs_primary_plane_atomic_update,
>>>>>> - .atomic_enable = vs_primary_plane_atomic_enable,
>>>>>> .atomic_disable =
>>>>>> vs_primary_plane_atomic_disable,
>>>>>> };
>>>>>>
--
--
Thomas Zimmermann
Graphics Driver Developer
SUSE Software Solutions Germany GmbH
Frankenstr. 146, 90461 Nürnberg, Germany, www.suse.com
GF: Stefan Gaiser, Jochen Jaser, Abhinav Puri, (HRB 36809, AG Nürnberg)
next prev parent reply other threads:[~2026-11-17 7:25 UTC|newest]
Thread overview: 15+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-11-02 7:57 [PATCH v2 0/4] drm/verisilicon: misc fixes Icenowy Zheng
2026-11-02 7:57 ` [PATCH v2 1/4] drm/verisilicon: disable the output before enabling it Icenowy Zheng
2026-11-02 7:57 ` [PATCH v2 2/4] drm/verisilicon: nuke planes' atomic_enable hooks Icenowy Zheng
2026-11-16 13:37 ` Thomas Zimmermann
2026-11-16 15:11 ` Icenowy Zheng
2026-11-16 15:20 ` Thomas Zimmermann
2026-11-16 15:25 ` Icenowy Zheng
2026-11-17 5:19 ` Icenowy Zheng
2026-11-17 7:25 ` Thomas Zimmermann [this message]
2026-11-17 7:34 ` Icenowy Zheng
2026-11-17 7:39 ` Thomas Zimmermann
2026-11-02 7:57 ` [PATCH v2 3/4] drm/verisilicon: fix DC8200 primary plane disable clearing FB_EN Icenowy Zheng
2026-11-02 7:57 ` [PATCH v2 4/4] drm/verisilicon: check old state CRTC in plane atomic_disable Icenowy Zheng
2026-11-16 13:42 ` Thomas Zimmermann
2026-11-12 7:46 ` [PATCH v2 0/4] drm/verisilicon: misc fixes Icenowy Zheng
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=a96e7813-6918-44f5-82e2-ca40051abea0@suse.de \
--to=tzimmermann@suse.de \
--cc=a0987203069@gmail.com \
--cc=airlied@gmail.com \
--cc=dmitry.baryshkov@oss.qualcomm.com \
--cc=dri-devel@lists.freedesktop.org \
--cc=gaohan@iscas.ac.cn \
--cc=linux-kernel@vger.kernel.org \
--cc=maarten.lankhorst@linux.intel.com \
--cc=mripard@kernel.org \
--cc=simona@ffwll.ch \
--cc=zhengxingda@iscas.ac.cn \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®