mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: "David Hildenbrand (Arm)" <david@kernel.org>
To: Joanne Koong <joannelkoong@gmail.com>,
	Andrew Morton <akpm@linux-foundation.org>
Cc: linux-mm@kvack.org, linux-kernel@vger.kernel.org,
	Lorenzo Stoakes <ljs@kernel.org>,
	"Liam R . Howlett" <liam@infradead.org>,
	Vlastimil Babka <vbabka@kernel.org>,
	Mike Rapoport <rppt@kernel.org>,
	Suren Baghdasaryan <surenb@google.com>,
	Michal Hocko <mhocko@suse.com>,
	Johannes Weiner <hannes@cmpxchg.org>,
	Qi Zheng <qi.zheng@linux.dev>,
	Shakeel Butt <shakeel.butt@linux.dev>,
	Roman Gushchin <roman.gushchin@linux.dev>,
	Muchun Song <muchun.song@linux.dev>, Zi Yan <ziy@nvidia.com>,
	Baolin Wang <baolin.wang@linux.alibaba.com>,
	Ryan Roberts <ryan.roberts@arm.com>,
	Barry Song <baohua@kernel.org>, Usama Arif <usama.arif@linux.dev>,
	Lance Yang <lance.yang@linux.dev>,
	Hugh Dickins <hughd@google.com>
Subject: Re: [PATCH v3] mm: unqueue deferred split folios outside the lruvec lock
Date: Tue, 20 Oct 2026 10:15:46 +0200	[thread overview]
Message-ID: <a9dedb1a-3b96-496b-ace8-6135167a61f6@kernel.org> (raw)
In-Reply-To: <20261019230646.3510790-1-joannelkoong@gmail.com>

On 10/20/26 01:06, Joanne Koong wrote:
> move_folios_to_lru(), folio_batch_move_lru() and folios_put_refs() call
> folio_unqueue_deferred_split() on folios where the refcount has dropped
> to zero. In these paths, folio_unqueue_deferred_split() is called with
> the lruvec lock often held (move_folios_to_lru() always holds it and
> folio_batch_move_lru()/folios_put_refs() usually hold it for every folio
> in the batch except the first). However, it's not needed to hold the
> lruvec lock.
> 
> The lruvec lock protects folio->lru and the reclaim LRU lists whereas
> the deferred split queue lives on folio->_deferred_list in
> deferred_split_lru. The deferred_split_lru is a list_lru with its own
> per-memcg per-node lock.
> 
> There are already other existing callers that call
> folio_unqueue_deferred_split() without holding the lruvec lock (eg
> __folio_put(), shrink_folio_list(), __folio_migrate_mapping(), ...).
> 
> Add folio_batch_unqueue_deferred_split() and use it in
> move_folios_to_lru(), folio_batch_move_lru(), and folios_put_refs() to
> unqueue each batch of zero-refcount folios from the deferred split list
> after the lruvec lock is released and before
> mem_cgroup_uncharge_folios(). This helps shorten the lruvec lock's
> critical sections, which run with IRQs disabled and are highly
> contended.
> 
> This came out of the discussion on v2 of the mTHP shrinker series [1],
> where queueing small mTHP folios on the deferred split queue was found
> to regress Barry's fault microbenchmark. With [1] applied and
> khugepaged/max_ptes_none=0 so that every folio is queued, perf lock
> contention showed that the extra cost came from waiting on the lruvec
> lock in the free path.
> 
> Test setup: 2-socket Intel Skylake, 40 cores / 80 threads, memory bound
> to node 0 so that all threads contend on one lruvec, with each of 80
> threads faulting in and unmapping 16 MB of anonymous memory 200 times.
> With only 16K mTHP enabled, this patch reduces the queueing cost from
> 15% runtime to noise, and lruvec lock wait time (summed across threads)
> drops from 491 seconds to 38 seconds. Most of the remaining contention
> moves to the deferred split list_lru lock, but runtime still drops back
> to the unqueued baseline. This test uses a worst-case configuration ([1]
> is expected to only queue folios of 2M and larger).
> 
> [1] https://lore.kernel.org/linux-mm/CAJnrk1a2PpUGTsCgS7jct2KET4K2zAL+_h+te8G1MaU9bXs99w@mail.gmail.com/
> 
> Reviewed-by: Lance Yang <lance.yang@linux.dev>
> Signed-off-by: Joanne Koong <joannelkoong@gmail.com>
> ---

Thanks Joanne!

Acked-by: David Hildenbrand (Arm) <david@kernel.org>

-- 
Cheers,

David

  parent reply	other threads:[~2026-10-20  8:15 UTC|newest]

Thread overview: 5+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-10-19 23:06 Joanne Koong
2026-10-20  0:16 ` Shakeel Butt
2026-10-20  2:28 ` Muchun Song
2026-10-20  8:15 ` David Hildenbrand (Arm) [this message]
2026-10-20  9:26 ` Barry Song

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=a9dedb1a-3b96-496b-ace8-6135167a61f6@kernel.org \
    --to=david@kernel.org \
    --cc=akpm@linux-foundation.org \
    --cc=baohua@kernel.org \
    --cc=baolin.wang@linux.alibaba.com \
    --cc=hannes@cmpxchg.org \
    --cc=hughd@google.com \
    --cc=joannelkoong@gmail.com \
    --cc=lance.yang@linux.dev \
    --cc=liam@infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mm@kvack.org \
    --cc=ljs@kernel.org \
    --cc=mhocko@suse.com \
    --cc=muchun.song@linux.dev \
    --cc=qi.zheng@linux.dev \
    --cc=roman.gushchin@linux.dev \
    --cc=rppt@kernel.org \
    --cc=ryan.roberts@arm.com \
    --cc=shakeel.butt@linux.dev \
    --cc=surenb@google.com \
    --cc=usama.arif@linux.dev \
    --cc=vbabka@kernel.org \
    --cc=ziy@nvidia.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®