Re: [PATCH v2 2/3] PCI: endpoint: pci-epf-vntb: Align mw naming with config names

[Frank Li <Frank.li@nxp.com>]

On Tue, Jun 03, 2025 at 07:03:39PM +0200, Jerome Brunet wrote:
> The config file related to the memory windows start the numbering of
> the MW from 1. The other NTB function does the same, yet the enumeration
> defining the BARs of the vNTB function starts numbering the MW from 0.
>
> Both numbering are fine I suppose but mixing the two is a bit confusing.
> The configfs file being the interface with userspace, lets keep that stable
> and consistently start the numbering of the MW from 1.
>
> Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>

Reviewed-by: Frank Li <Frank.Li@nxp.com>

> ---
>  drivers/pci/endpoint/functions/pci-epf-vntb.c | 10 +++++-----
>  1 file changed, 5 insertions(+), 5 deletions(-)
>
> diff --git a/drivers/pci/endpoint/functions/pci-epf-vntb.c b/drivers/pci/endpoint/functions/pci-epf-vntb.c
> index 35fa0a21fc91100a5539bff775e7ebc25e1fb9c1..2198282a80a40774047502a37f0288ca396bdb0e 100644
> --- a/drivers/pci/endpoint/functions/pci-epf-vntb.c
> +++ b/drivers/pci/endpoint/functions/pci-epf-vntb.c
> @@ -70,9 +70,9 @@ static struct workqueue_struct *kpcintb_workqueue;
>  enum epf_ntb_bar {
>  	BAR_CONFIG,
>  	BAR_DB,
> -	BAR_MW0,
>  	BAR_MW1,
>  	BAR_MW2,
> +	BAR_MW3,
>  };
>
>  /*
> @@ -576,7 +576,7 @@ static int epf_ntb_mw_bar_init(struct epf_ntb *ntb)
>
>  	for (i = 0; i < ntb->num_mws; i++) {
>  		size = ntb->mws_size[i];
> -		barno = ntb->epf_ntb_bar[BAR_MW0 + i];
> +		barno = ntb->epf_ntb_bar[BAR_MW1 + i];
>
>  		ntb->epf->bar[barno].barno = barno;
>  		ntb->epf->bar[barno].size = size;
> @@ -629,7 +629,7 @@ static void epf_ntb_mw_bar_clear(struct epf_ntb *ntb, int num_mws)
>  	int i;
>
>  	for (i = 0; i < num_mws; i++) {
> -		barno = ntb->epf_ntb_bar[BAR_MW0 + i];
> +		barno = ntb->epf_ntb_bar[BAR_MW1 + i];
>  		pci_epc_clear_bar(ntb->epf->epc,
>  				  ntb->epf->func_no,
>  				  ntb->epf->vfunc_no,
> @@ -676,7 +676,7 @@ static int epf_ntb_init_epc_bar(struct epf_ntb *ntb)
>  	epc_features = pci_epc_get_features(ntb->epf->epc, ntb->epf->func_no, ntb->epf->vfunc_no);
>
>  	/* These are required BARs which are mandatory for NTB functionality */
> -	for (bar = BAR_CONFIG; bar <= BAR_MW0; bar++, barno++) {
> +	for (bar = BAR_CONFIG; bar <= BAR_MW1; bar++, barno++) {
>  		barno = pci_epc_get_next_free_bar(epc_features, barno);
>  		if (barno < 0) {
>  			dev_err(dev, "Fail to get NTB function BAR\n");
> @@ -1048,7 +1048,7 @@ static int vntb_epf_mw_set_trans(struct ntb_dev *ndev, int pidx, int idx,
>  	struct device *dev;
>
>  	dev = &ntb->ntb.dev;
> -	barno = ntb->epf_ntb_bar[BAR_MW0 + idx];
> +	barno = ntb->epf_ntb_bar[BAR_MW1 + idx];
>  	epf_bar = &ntb->epf->bar[barno];
>  	epf_bar->phys_addr = addr;
>  	epf_bar->barno = barno;
>
> --
> 2.47.2
>