mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
To: Christian Marangi <ansuelsmth@gmail.com>
Cc: "Uwe Kleine-König" <ukleinek@kernel.org>,
	linux-kernel@vger.kernel.org, linux-pwm@vger.kernel.org,
	"Benjamin Larsson" <benjamin.larsson@genexis.eu>,
	"AngeloGioacchino Del Regno"
	<angelogioacchino.delregno@collabora.com>,
	"Lorenzo Bianconi" <lorenzo@kernel.org>
Subject: Re: [PATCH v18] pwm: airoha: Add support for EN7581 SoC
Date: Fri, 27 Jun 2025 11:58:04 +0300	[thread overview]
Message-ID: <aF5dHDr8yDSKlp5j@smile.fi.intel.com> (raw)
In-Reply-To: <20250626224805.9034-1-ansuelsmth@gmail.com>

On Fri, Jun 27, 2025 at 12:47:53AM +0200, Christian Marangi wrote:
> From: Benjamin Larsson <benjamin.larsson@genexis.eu>
> 
> Introduce driver for PWM module available on EN7581 SoC.

...

> + * Copyright 2025 Markus Gothe <markus.gothe@genexis.eu>
> + *		  Christian Marangi <ansuelsmth@gmail.com>

I'm not sure you can change the copyright line like this. I would rather expect

 * Copyright 2012 Markus Gothe <markus.gothe@genexis.eu>
 * Copyright 2025 Christian Marangi <ansuelsmth@gmail.com>

(Sorry, I forgot the exact original year there, but you got the point)

...

> +	/* Global mutex to protect bucket used refcount_t */
> +	struct mutex mutex;

This makes a little sense. Either you use refcount_t (which is atomic) or
use mutex + regular variable.

...

> +	/*
> +	 * It is necessary to explicitly shift out all zeros after muxing
> +	 * to initialize the shift register before enabling PWM
> +	 * mode because in PWM mode SIPO will not start shifting until
> +	 * it needs to output a non-zero value (bit 31 of led_data
> +	 * indicates shifting in progress and it must return to zero
> +	 * before led_data can be written or PWM mode can be set)

Missing period at the end.

> +	 */

...

> +static void airoha_pwm_disable(struct airoha_pwm *pc, struct pwm_device *pwm)
> +{
> +	/* Disable PWM and release the bucket */
> +	airoha_pwm_config_flash_map(pc, pwm->hwpwm, -1);
> +	airoha_pwm_release_bucket_config(pc, pwm->hwpwm);
> +
> +	clear_bit(pwm->hwpwm, pc->initialized);
> +
> +	/* If no SIPO is used, disable the shift register chip */
> +	if (find_next_bit(pc->initialized, AIROHA_PWM_MAX_CHANNELS,
> +			  AIROHA_PWM_NUM_GPIO) >= AIROHA_PWM_NUM_GPIO)

This can be rewritten as

	if (!bitmap_read(pc->initialized, AIROHA_PWM_NUM_GPIO, AIROHA_PWM_NUM_SIPO))

(seems to me that the above code is buggy and has to have a check against the
 full size of bitmap).

> +		regmap_clear_bits(pc->regmap, AIROHA_PWM_REG_SIPO_FLASH_MODE_CFG,
> +				  AIROHA_PWM_SERIAL_GPIO_FLASH_MODE);
> +}

-- 
With Best Regards,
Andy Shevchenko



  reply	other threads:[~2025-06-27  8:58 UTC|newest]

Thread overview: 8+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2025-06-26 22:47 Christian Marangi
2025-06-27  8:58 ` Andy Shevchenko [this message]
2025-06-27  9:32   ` Christian Marangi
2025-06-27 10:25     ` Andy Shevchenko
2025-06-27 10:34       ` Christian Marangi
2025-06-27 10:56         ` Andy Shevchenko
2025-06-30 10:19           ` Christian Marangi
2025-06-30 10:29             ` Andy Shevchenko

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=aF5dHDr8yDSKlp5j@smile.fi.intel.com \
    --to=andriy.shevchenko@linux.intel.com \
    --cc=angelogioacchino.delregno@collabora.com \
    --cc=ansuelsmth@gmail.com \
    --cc=benjamin.larsson@genexis.eu \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-pwm@vger.kernel.org \
    --cc=lorenzo@kernel.org \
    --cc=ukleinek@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®