Hi,

On Fri 21 Feb 25, 17:17, Kuba Szczodrzyński wrote:
> Add LVDS pins to the PIO since it's now supported on D1s/T113.
> 
> Signed-off-by: Kuba Szczodrzyński <kuba@szczodrzynski.pl>
> ---
>  arch/riscv/boot/dts/allwinner/sunxi-d1s-t113.dtsi | 8 ++++++++
>  1 file changed, 8 insertions(+)
> 
> diff --git a/arch/riscv/boot/dts/allwinner/sunxi-d1s-t113.dtsi b/arch/riscv/boot/dts/allwinner/sunxi-d1s-t113.dtsi
> index d241ba306..174b6d8f9 100644
> --- a/arch/riscv/boot/dts/allwinner/sunxi-d1s-t113.dtsi
> +++ b/arch/riscv/boot/dts/allwinner/sunxi-d1s-t113.dtsi
> @@ -78,6 +78,15 @@ dsi_4lane_pins: dsi-4lane-pins {
>  				function = "dsi";
>  			};
>  
> +			/omit-if-no-ref/
> +			lvds0_pins: lvds0-pins {

This usually has a lcd_ prefix (see sun7i-a20.dtsi and sun8i-a83t.dtsi).
It should also be sorted alphabetically.

Thanks!

Paul

> +				pins = "PD0", "PD1", "PD2", "PD3", "PD4", "PD5",
> +				       "PD6", "PD7", "PD8", "PD9";
> +				function = "lvds0";
> +				drive-strength = <30>;
> +				bias-disable;
> +			};
> +
>  			/omit-if-no-ref/
>  			lcd_rgb666_pins: lcd-rgb666-pins {
>  				pins = "PD0", "PD1", "PD2", "PD3", "PD4", "PD5",
> -- 
> 2.25.1
> 
> 

-- 
Paul Kocialkowski,

Independent contractor - sys-base - https://www.sys-base.io/
Free software developer - https://www.paulk.fr/

Expert in multimedia, graphics and embedded hardware support with Linux.