From: Liviu Dudau <liviu.dudau@arm.com>
To: Karunika Choo <karunika.choo@arm.com>
Cc: dri-devel@lists.freedesktop.org, nd@arm.com,
Boris Brezillon <boris.brezillon@collabora.com>,
Steven Price <steven.price@arm.com>,
Maarten Lankhorst <maarten.lankhorst@linux.intel.com>,
Maxime Ripard <mripard@kernel.org>,
Thomas Zimmermann <tzimmermann@suse.de>,
David Airlie <airlied@gmail.com>, Simona Vetter <simona@ffwll.ch>,
linux-kernel@vger.kernel.org
Subject: Re: [PATCH v5 4/6] drm/panthor: Add support for Mali-Gx15 family of GPUs
Date: Mon, 21 Jul 2025 15:46:31 +0100 [thread overview]
Message-ID: <aH5Sx15_pyMa1rmN@e110455-lin.cambridge.arm.com> (raw)
In-Reply-To: <20250721111344.1610250-5-karunika.choo@arm.com>
On Mon, Jul 21, 2025 at 12:13:42PM +0100, Karunika Choo wrote:
> Mali-Gx15 introduces a new GPU_FEATURES register that provides
> information about GPU-wide supported features. The register value will
> be passed on to userspace via gpu_info. It also adds the following
> registers that are specific to the kernel driver only:
> - ASN_HASH_0~2
> - DOORBELL_FEATURES
> - PRFCNT_FEATURES
> - SYSC_ALLOC0~7
> - SYSC_PBHA_OVERRIDE0~3
>
> Additionally, Mali-Gx15 presents an 'Immortalis' naming variant
> depending on the shader core count and presence of Ray Intersection
> feature support.
>
> This patch adds:
> - support for correctly identifying the model names for Mali-Gx15 GPUs.
> - arch 11.8 FW binary support
>
> Signed-off-by: Karunika Choo <karunika.choo@arm.com>
> ---
> drivers/gpu/drm/panthor/panthor_fw.c | 1 +
> drivers/gpu/drm/panthor/panthor_hw.c | 15 +++++++++++++++
> drivers/gpu/drm/panthor/panthor_regs.h | 11 +++++++++++
> include/uapi/drm/panthor_drm.h | 3 +++
> 4 files changed, 30 insertions(+)
>
> diff --git a/drivers/gpu/drm/panthor/panthor_fw.c b/drivers/gpu/drm/panthor/panthor_fw.c
> index b7b454d16f12..fa6e0b48a0b2 100644
> --- a/drivers/gpu/drm/panthor/panthor_fw.c
> +++ b/drivers/gpu/drm/panthor/panthor_fw.c
> @@ -1404,3 +1404,4 @@ int panthor_fw_init(struct panthor_device *ptdev)
> MODULE_FIRMWARE("arm/mali/arch10.8/mali_csffw.bin");
> MODULE_FIRMWARE("arm/mali/arch10.10/mali_csffw.bin");
> MODULE_FIRMWARE("arm/mali/arch10.12/mali_csffw.bin");
> +MODULE_FIRMWARE("arm/mali/arch11.8/mali_csffw.bin");
> diff --git a/drivers/gpu/drm/panthor/panthor_hw.c b/drivers/gpu/drm/panthor/panthor_hw.c
> index 7f138974d43b..a7583342d797 100644
> --- a/drivers/gpu/drm/panthor/panthor_hw.c
> +++ b/drivers/gpu/drm/panthor/panthor_hw.c
> @@ -13,6 +13,9 @@ static char *get_gpu_model_name(struct panthor_device *ptdev)
> const u32 gpu_id = ptdev->gpu_info.gpu_id;
> const u32 product_id = GPU_PROD_ID_MAKE(GPU_ARCH_MAJOR(gpu_id),
> GPU_PROD_MAJOR(gpu_id));
> + const bool ray_intersection = !!(ptdev->gpu_info.gpu_features &
> + GPU_FEATURES_RAY_INTERSECTION);
> + const u8 shader_core_count = hweight64(ptdev->gpu_info.shader_present);
>
> switch (product_id) {
> case GPU_PROD_ID_MAKE(10, 2):
> @@ -23,6 +26,15 @@ static char *get_gpu_model_name(struct panthor_device *ptdev)
> return "Mali-G510";
> case GPU_PROD_ID_MAKE(10, 4):
> return "Mali-G310";
> + case GPU_PROD_ID_MAKE(11, 2):
> + if (shader_core_count > 10 && ray_intersection)
> + return "Mali-G715-Immortalis";
> + else if (shader_core_count >= 7)
> + return "Mali-G715";
> +
> + fallthrough;
> + case GPU_PROD_ID_MAKE(11, 3):
> + return "Mali-G615";
> }
>
> return "(Unknown Mali GPU)";
> @@ -53,6 +65,9 @@ static void panthor_gpu_info_init(struct panthor_device *ptdev)
> ptdev->gpu_info.shader_present = gpu_read64(ptdev, GPU_SHADER_PRESENT);
> ptdev->gpu_info.tiler_present = gpu_read64(ptdev, GPU_TILER_PRESENT);
> ptdev->gpu_info.l2_present = gpu_read64(ptdev, GPU_L2_PRESENT);
> +
> + /* Introduced in arch 11.x */
> + ptdev->gpu_info.gpu_features = gpu_read64(ptdev, GPU_FEATURES);
> }
>
> static void panthor_hw_info_init(struct panthor_device *ptdev)
> diff --git a/drivers/gpu/drm/panthor/panthor_regs.h b/drivers/gpu/drm/panthor/panthor_regs.h
> index 48bbfd40138c..e4c34f70a880 100644
> --- a/drivers/gpu/drm/panthor/panthor_regs.h
> +++ b/drivers/gpu/drm/panthor/panthor_regs.h
> @@ -70,6 +70,10 @@
> #define GPU_PWR_OVERRIDE0 0x54
> #define GPU_PWR_OVERRIDE1 0x58
>
> +#define GPU_FEATURES 0x60
> +#define GPU_FEATURES_RAY_INTERSECTION BIT(2)
> +#define GPU_PRFCNT_FEATURES 0x68
> +
> #define GPU_TIMESTAMP_OFFSET 0x88
> #define GPU_CYCLE_COUNT 0x90
> #define GPU_TIMESTAMP 0x98
> @@ -81,6 +85,8 @@
>
> #define GPU_TEXTURE_FEATURES(n) (0xB0 + ((n) * 4))
Until they are actually used I would suggest that you remove the definitions for the
registers that are following this line.
With that change,
Reviewed-by: Liviu Dudau <liviu.dudau@arm.com>
Best regards,
Liviu
>
> +#define GPU_DOORBELL_FEATURES 0xC0
> +
> #define GPU_SHADER_PRESENT 0x100
> #define GPU_TILER_PRESENT 0x110
> #define GPU_L2_PRESENT 0x120
> @@ -107,6 +113,8 @@
>
> #define GPU_REVID 0x280
>
> +#define GPU_ASN_HASH(n) (0x2C0 + ((n) * 4))
> +
> #define GPU_COHERENCY_FEATURES 0x300
> #define GPU_COHERENCY_PROT_BIT(name) BIT(GPU_COHERENCY_ ## name)
>
> @@ -115,6 +123,9 @@
> #define GPU_COHERENCY_ACE 1
> #define GPU_COHERENCY_NONE 31
>
> +#define GPU_SYSC_PBHA_OVERRIDE(n) (0x320 + ((n) * 4))
> +#define GPU_SYSC_ALLOC(n) (0x340 + ((n) * 4))
> +
> #define MCU_CONTROL 0x700
> #define MCU_CONTROL_ENABLE 1
> #define MCU_CONTROL_AUTO 2
> diff --git a/include/uapi/drm/panthor_drm.h b/include/uapi/drm/panthor_drm.h
> index e1f43deb7eca..467d365ed7ba 100644
> --- a/include/uapi/drm/panthor_drm.h
> +++ b/include/uapi/drm/panthor_drm.h
> @@ -327,6 +327,9 @@ struct drm_panthor_gpu_info {
>
> /** @pad: MBZ. */
> __u32 pad;
> +
> + /** @gpu_features: Bitmask describing supported GPU-wide features */
> + __u64 gpu_features;
> };
>
> /**
> --
> 2.49.0
>
--
====================
| I would like to |
| fix the world, |
| but they're not |
| giving me the |
\ source code! /
---------------
¯\_(ツ)_/¯
next prev parent reply other threads:[~2025-07-21 14:46 UTC|newest]
Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-07-21 11:13 [PATCH v5 0/6] Add support for new Mali GPUs Karunika Choo
2025-07-21 11:13 ` [PATCH v5 1/6] drm/panthor: Add panthor_hw and move gpu_info initialization into it Karunika Choo
2025-07-21 14:30 ` Liviu Dudau
2025-07-21 11:13 ` [PATCH v5 2/6] drm/panthor: Simplify getting the GPU model name Karunika Choo
2025-07-21 14:41 ` Liviu Dudau
2025-07-21 11:13 ` [PATCH v5 3/6] drm/panthor: Add support for Mali-G710, Mali-G510 and Mali-G310 Karunika Choo
2025-07-21 14:42 ` Liviu Dudau
2025-07-22 8:29 ` Erik Faye-Lund
2025-07-22 8:55 ` Liviu Dudau
2025-07-24 5:34 ` Chia-I Wu
2025-07-21 11:13 ` [PATCH v5 4/6] drm/panthor: Add support for Mali-Gx15 family of GPUs Karunika Choo
2025-07-21 14:46 ` Liviu Dudau [this message]
2025-07-21 11:13 ` [PATCH v5 5/6] drm/panthor: Make MMU cache maintenance use FLUSH_CACHES command Karunika Choo
2025-07-21 14:54 ` Liviu Dudau
2025-07-21 11:13 ` [PATCH v5 6/6] drm/panthor: Add support for Mali-Gx20 and Mali-Gx25 GPUs Karunika Choo
2025-07-21 14:59 ` Liviu Dudau
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=aH5Sx15_pyMa1rmN@e110455-lin.cambridge.arm.com \
--to=liviu.dudau@arm.com \
--cc=airlied@gmail.com \
--cc=boris.brezillon@collabora.com \
--cc=dri-devel@lists.freedesktop.org \
--cc=karunika.choo@arm.com \
--cc=linux-kernel@vger.kernel.org \
--cc=maarten.lankhorst@linux.intel.com \
--cc=mripard@kernel.org \
--cc=nd@arm.com \
--cc=simona@ffwll.ch \
--cc=steven.price@arm.com \
--cc=tzimmermann@suse.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®