Hi Andy,

thanks for the detailed review again. Some comments below.

Andy Shevchenko <andriy.shevchenko@linux.intel.com> schrieb am Mi, 16. Jul 10:34:
> > +#define	VEML6046X00_GAIN_1          0x0
> > +#define	VEML6046X00_GAIN_2          0x1
> > +#define	VEML6046X00_GAIN_0_66       0x2
> > +#define	VEML6046X00_GAIN_0_5        0x3
> 
> Is it defined as hexadecimal in the datasheet? Otherwise use plain decimal
> numbers.

It's in the datasheet defined exactly the way i did.

> > +static int veml6046x00_validate_part_id(struct veml6046x00_data *data)
> > +{
> > +	struct device *dev = regmap_get_device(data->regmap);
> > +	unsigned int part_id;
> > +	int ret;
> > +	__le16 reg;
> > +
> > +	ret = regmap_bulk_read(data->regmap, VEML6046X00_REG_ID,
> > +			       &reg, sizeof(reg));
> > +	if (ret)
> > +		return dev_err_probe(dev, ret, "Failed to read ID\n");
> > +
> > +	part_id = le16_to_cpu(reg);
> > +	if (part_id != 0x0001)
> > +		dev_info(dev, "Unknown ID %#04x\n", part_id);
> 
> For 0 it will print 0 and not 0x0000. Is it okay?

I just tried and it prints 0x00 if the part_id is 0.

Best regards,

Andreas