From: Lukas Wunner <lukas@wunner.de>
To: Bjorn Helgaas <helgaas@kernel.org>
Cc: "Niklas Schnelle" <schnelle@linux.ibm.com>,
"Mahesh J Salgaonkar" <mahesh@linux.ibm.com>,
"Linas Vepstas" <linasvepstas@gmail.com>,
"Ilpo Järvinen" <ilpo.jarvinen@linux.intel.com>,
"Manivannan Sadhasivam" <mani@kernel.org>,
"Gerald Schaefer" <gerald.schaefer@linux.ibm.com>,
"Heiko Carstens" <hca@linux.ibm.com>,
"Vasily Gorbik" <gor@linux.ibm.com>,
"Alexander Gordeev" <agordeev@linux.ibm.com>,
"Christian Borntraeger" <borntraeger@linux.ibm.com>,
"Sven Schnelle" <svens@linux.ibm.com>,
"Peter Oberparleiter" <oberpar@linux.ibm.com>,
"Matthew Rosato" <mjrosato@linux.ibm.com>,
"Oliver O'Halloran" <oohall@gmail.com>,
"Sinan Kaya" <okaya@kernel.org>,
linuxppc-dev@lists.ozlabs.org, linux-s390@vger.kernel.org,
linux-kernel@vger.kernel.org, linux-pci@vger.kernel.org,
"Keith Busch" <kbusch@kernel.org>
Subject: Re: [PATCH v5 0/3] PCI/ERR: s390/pci: Use pci_uevent_ers() in PCI recovery
Date: Tue, 26 Aug 2025 08:21:24 +0200 [thread overview]
Message-ID: <aK1SZGJBjrOx0s6y@wunner.de> (raw)
In-Reply-To: <20250814210201.GA348169@bhelgaas>
On Thu, Aug 14, 2025 at 04:02:01PM -0500, Bjorn Helgaas wrote:
> On Thu, Aug 07, 2025 at 03:55:37PM +0200, Niklas Schnelle wrote:
> > Niklas Schnelle (3):
> > PCI/AER: Fix missing uevent on recovery when a reset is requested
> > PCI/ERR: s390/pci: Use pci_uevent_ers() in PCI recovery
> > powerpc/eeh: Use result of error_detected() in uevent
> >
> > arch/powerpc/kernel/eeh_driver.c | 2 +-
> > arch/s390/pci/pci_event.c | 3 +++
> > drivers/pci/pci-driver.c | 3 ++-
> > include/linux/pci.h | 2 +-
> > 4 files changed, 7 insertions(+), 3 deletions(-)
>
> Applied on pci/aer for v6.18, thanks! This on top of Lukas's series:
>
> https://lore.kernel.org/all/cover.1755008151.git.lukas@wunner.de/
>
> Expect the whole branch to be rebased to add Reviewed-by, etc.
In case it helps, these are all the tags that were offered for my series
and that haven't been added to the pci/aer branch yet:
d0a2dee7d458 PCI/AER: Allow drivers to opt in to Bus Reset on Non-Fatal Errors
Reviewed-by: Linas Vepstas <linasvepstas@gmail.com>
https://lore.kernel.org/r/CAHrUA34fVV48MShC4CrXSmveR9i8MC4KAQxtM+XQY_Ao8joBQw@mail.gmail.com/
Reviewed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
https://lore.kernel.org/r/8491adbd-d8e8-465a-971e-3fe50e2561b1@linux.intel.com/
1cbc5e25fb70 PCI/ERR: Fix uevent on failure to recover
Reviewed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
https://lore.kernel.org/r/f0b59604-ae4d-4afe-8522-a8fbe5568e96@linux.intel.com/
Reviewed-by: Linas Vepstas <linasvepstas@gmail.com>
https://lore.kernel.org/r/CAHrUA34fVV48MShC4CrXSmveR9i8MC4KAQxtM+XQY_Ao8joBQw@mail.gmail.com/
Reviewed-by: Niklas Schnelle <schnelle@linux.ibm.com>
https://lore.kernel.org/r/a4419480c3d494a5940e87fea0c7b9864dc3e85b.camel@linux.ibm.com/
9011f0667c93 PCI/ERR: Notify drivers on failure to recover
Reviewed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
https://lore.kernel.org/r/fa9f42ab-bced-4c7f-9977-c0b611e92e2e@linux.intel.com/
Reviewed-by: Linas Vepstas <linasvepstas@gmail.com>
https://lore.kernel.org/r/CAHrUA34fVV48MShC4CrXSmveR9i8MC4KAQxtM+XQY_Ao8joBQw@mail.gmail.com/
45bc82563d55 PCI/ERR: Update device error_state already after reset
Reviewed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
https://lore.kernel.org/r/004298f7-ae08-428e-9b98-995fc56e55b1@linux.intel.com/
Reviewed-by: Linas Vepstas <linasvepstas@gmail.com>
https://lore.kernel.org/r/CAHrUA34fVV48MShC4CrXSmveR9i8MC4KAQxtM+XQY_Ao8joBQw@mail.gmail.com/
cc4a7a21e815 PCI/ERR: Remove remnants of .link_reset() callback
Reviewed-by: Linas Vepstas <linasvepstas@gmail.com>
https://lore.kernel.org/r/CAHrUA34fVV48MShC4CrXSmveR9i8MC4KAQxtM+XQY_Ao8joBQw@mail.gmail.com/
Reviewed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
https://lore.kernel.org/r/59308229-24ed-4b8a-b398-cc47c61dfc47@linux.intel.com/
Reviewed-by: Justin Tee <justin.tee@broadcom.com>
https://lore.kernel.org/r/CABPRKS_Ut8Z+rvM4+-E0YvEwUKbMb0SDpLBdH+g1sYEh+YcxFA@mail.gmail.com/
Thanks!
Lukas
prev parent reply other threads:[~2025-08-26 6:27 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-08-07 13:55 Niklas Schnelle
2025-08-07 13:55 ` [PATCH v5 1/3] PCI/AER: Fix missing uevent on recovery when a reset is requested Niklas Schnelle
2025-08-07 13:55 ` [PATCH v5 2/3] PCI/ERR: s390/pci: Use pci_uevent_ers() in PCI recovery Niklas Schnelle
2025-08-07 13:55 ` [PATCH v5 3/3] powerpc/eeh: Use result of error_detected() in uevent Niklas Schnelle
2025-08-07 14:59 ` Mahesh J Salgaonkar
2025-08-07 16:17 ` Sathyanarayanan Kuppuswamy
2025-08-14 8:44 ` [PATCH v5 0/3] PCI/ERR: s390/pci: Use pci_uevent_ers() in PCI recovery Niklas Schnelle
2025-08-14 21:02 ` Bjorn Helgaas
2025-08-26 6:21 ` Lukas Wunner [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=aK1SZGJBjrOx0s6y@wunner.de \
--to=lukas@wunner.de \
--cc=agordeev@linux.ibm.com \
--cc=borntraeger@linux.ibm.com \
--cc=gerald.schaefer@linux.ibm.com \
--cc=gor@linux.ibm.com \
--cc=hca@linux.ibm.com \
--cc=helgaas@kernel.org \
--cc=ilpo.jarvinen@linux.intel.com \
--cc=kbusch@kernel.org \
--cc=linasvepstas@gmail.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pci@vger.kernel.org \
--cc=linux-s390@vger.kernel.org \
--cc=linuxppc-dev@lists.ozlabs.org \
--cc=mahesh@linux.ibm.com \
--cc=mani@kernel.org \
--cc=mjrosato@linux.ibm.com \
--cc=oberpar@linux.ibm.com \
--cc=okaya@kernel.org \
--cc=oohall@gmail.com \
--cc=schnelle@linux.ibm.com \
--cc=svens@linux.ibm.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®