From: Herbert Xu <herbert@gondor.apana.org.au>
To: T Pratham <t-pratham@ti.com>
Cc: "David S . Miller" <davem@davemloft.net>,
Rob Herring <robh@kernel.org>,
Krzysztof Kozlowski <krzk+dt@kernel.org>,
Conor Dooley <conor+dt@kernel.org>,
linux-crypto@vger.kernel.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org, Kamlesh Gurudasani <kamlesh@ti.com>,
Manorit Chawdhry <m-chawdhry@ti.com>,
Vignesh Raghavendra <vigneshr@ti.com>,
Praneeth Bajjuri <praneeth@ti.com>,
Vishal Mahaveer <vishalm@ti.com>,
Kavitha Malarvizhi <k-malarvizhi@ti.com>
Subject: Re: [PATCH v7 0/2] Add support for Texas Instruments DTHEv2 Crypto Engine
Date: Sat, 30 Aug 2025 16:51:06 +0800 [thread overview]
Message-ID: <aLK7eiozc2F-kM_z@gondor.apana.org.au> (raw)
In-Reply-To: <20250820092710.3510788-1-t-pratham@ti.com>
On Wed, Aug 20, 2025 at 02:42:25PM +0530, T Pratham wrote:
> Data Transform and Hashing Engine (DTHE) v2 is a new cryptography engine
> introduced i TI AM62L SoC. DTHEv2 consists of multiple crypto IPs[1] (such
> as AES Engine, hashing engine, TRNG, etc.) which can be used for
> offloading cryptographic operations off of the CPU. The primary benefit
> of DTHEv2 is enhanced side-channel attack resistance, with AES and PKE
> engine being DPA and EMA resistant. These side-channel resistances are
> the underlying requirement for various certifications like SESIP, PSA,
> and IEC62443 (lvl 3+). Thus, DTHEv2 provides critical security benefits
> for embedded systems that require protection against passive physical
> attacks.
>
> The AES Engine of DTHEv2 supports multiple AES modes (ECB, CBC, CTR,
> CFB, f8), several protocols (GCM, CCM, XTS) and authentication modes
> (CBC-MAC and f9). The hashing engine supports MD5, SHA1, and SHA2 (224,
> 256, 384, 512) algorithms along with HMAC. This patch series introduces
> basic driver support for DTHEv2 engine, beginning with suporting AES-ECB
> and AES-CBC algorithms. Other algorithms are planned to be added
> gradually in phases after initial suppport is added.
>
> The driver is tested using full kernel crypto selftests (CRYPTO_SELFTESTS)
> which all pass successfully [2].
>
> Signed-off-by: T Pratham <t-pratham@ti.com>
> ---
> [1]: Section 14.6.3 (DMA Control Registers -> DMASS_DTHE)
> Link: https://www.ti.com/lit/ug/sprujb4/sprujb4.pdf
>
> [2]: DTHEv2 AES-ECB and AES-CBC kernel self-tests logs
> Link: https://gist.github.com/Pratham-T/aaa499cf50d20310cb27266a645bfd60
>
> Change log:
> v7:
> - Dropped redundant crypto_engine_stop() calls.
> - Corrected Reviewed-by tag.
> v6:
> - Reworded the cover letter and commit messages to name DTHEv2 as a
> crypto engine instead of crypto accelerator.
> - Reworded the cover letter completely to emphasise more on the utility
> of DTHEv2 as better resistance against physical attacks
> - Reworded DTHEv2 description (help text) in KConfig
> - Added dma_terminate_sync calls to ensure DMA requests are removed in
> case when completion times-out.
> - Some rearrangement of fields between dthe_tfm_ctx and dthe_aes_req_ctx
> struct, so that per tfm members are correctly placed in tfm_ctx and per
> request members are in req_ctx. Subsequently setkey, encrypt and
> decrypt functions are also changed.
> - Removed exit_tfm function which was useless and not required.
> - Removed unnecessary zeroing of tfm_ctx object in init_tfm.
> - Corrected return value in dthe_aes_run function.
> - Reduced cra_priority of DTHEv2 algorithms.
> v5:
> - Simplified tfm ctx struct
> - Set cra_reqsize instead of using crypto_skcipher_set_reqsize()
> - Move setting sysconfig and irqenable registers to dthe_aes_run
> v4:
> - Corrected dt-bindings example indentation
> - Simplified dt-bindings example, removing the node surrounding crypto
> - Fixed typo in dthev2-common.h header guard
> - Removed unused ctx field in dev_data struct
> - Moved per-op data into request context
> v3:
> - Corrected dt-bindings reg length is too long error
> - Converted AES driver code to use crypto_engine APIs for using
> internal crypto queue instead of mutex.
> - Removed calls to skcipher_request_complete in paths not returning
> -EINPROGRESS before.
> - Added missing KConfig import, which was accidentally removed in v2.
>
> v2:
> - Corrected dt-bindings syntax errors and other review comments in v1.
> - Completely changed driver code structure, splitting code into
> multiple files
>
> Link to previous versions:
> v6: https://lore.kernel.org/all/20250819065844.3337101-1-t-pratham@ti.com/
> v5: https://lore.kernel.org/all/20250603124217.957116-1-t-pratham@ti.com/
> v4: https://lore.kernel.org/all/20250508101723.846210-2-t-pratham@ti.com/
> v3: https://lore.kernel.org/all/20250502121253.456974-2-t-pratham@ti.com/
> v2: https://lore.kernel.org/all/20250411091321.2925308-1-t-pratham@ti.com/
> v1: https://lore.kernel.org/all/20250206-dthe-v2-aes-v1-0-1e86cf683928@ti.com/
> ---
>
> T Pratham (2):
> dt-bindings: crypto: Add binding for TI DTHE V2
> crypto: ti: Add driver for DTHE V2 AES Engine (ECB, CBC)
>
> .../bindings/crypto/ti,am62l-dthev2.yaml | 50 +++
> MAINTAINERS | 7 +
> drivers/crypto/Kconfig | 1 +
> drivers/crypto/Makefile | 1 +
> drivers/crypto/ti/Kconfig | 14 +
> drivers/crypto/ti/Makefile | 3 +
> drivers/crypto/ti/dthev2-aes.c | 411 ++++++++++++++++++
> drivers/crypto/ti/dthev2-common.c | 217 +++++++++
> drivers/crypto/ti/dthev2-common.h | 101 +++++
> 9 files changed, 805 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/crypto/ti,am62l-dthev2.yaml
> create mode 100644 drivers/crypto/ti/Kconfig
> create mode 100644 drivers/crypto/ti/Makefile
> create mode 100644 drivers/crypto/ti/dthev2-aes.c
> create mode 100644 drivers/crypto/ti/dthev2-common.c
> create mode 100644 drivers/crypto/ti/dthev2-common.h
>
> --
> 2.43.0
All applied. Thanks.
--
Email: Herbert Xu <herbert@gondor.apana.org.au>
Home Page: http://gondor.apana.org.au/~herbert/
PGP Key: http://gondor.apana.org.au/~herbert/pubkey.txt
next prev parent reply other threads:[~2025-08-30 8:51 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-08-20 9:12 T Pratham
2025-08-20 9:12 ` [PATCH v7 1/2] dt-bindings: crypto: Add binding for TI DTHE V2 T Pratham
2025-08-20 9:12 ` [PATCH v7 2/2] crypto: ti: Add driver for DTHE V2 AES Engine (ECB, CBC) T Pratham
2025-08-30 8:51 ` Herbert Xu [this message]
2025-08-30 8:52 ` [PATCH] crypto: ti - Enable compile testing for dthev2 Herbert Xu
2025-09-03 14:45 ` T Pratham
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=aLK7eiozc2F-kM_z@gondor.apana.org.au \
--to=herbert@gondor.apana.org.au \
--cc=conor+dt@kernel.org \
--cc=davem@davemloft.net \
--cc=devicetree@vger.kernel.org \
--cc=k-malarvizhi@ti.com \
--cc=kamlesh@ti.com \
--cc=krzk+dt@kernel.org \
--cc=linux-crypto@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=m-chawdhry@ti.com \
--cc=praneeth@ti.com \
--cc=robh@kernel.org \
--cc=t-pratham@ti.com \
--cc=vigneshr@ti.com \
--cc=vishalm@ti.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®