Re: [PATCH 2/2] iio: adc: ad9467: add support for ad9211

[Andy Shevchenko <andriy.shevchenko@intel.com>]

On Wed, Dec 03, 2025 at 12:20:34PM +0000, Tomas Melin wrote:
> The AD9211 is a 10-bit monolithic sampling analog-to-digital
> converter optimized for high performance, low power, and ease
> of use. The product operates at up to a 300 MSPS conversion
> rate and is optimized for outstanding dynamic performance
> in wideband carrier and broadband systems.
> 
> The scale table implemented here is not an exact match with the
> datasheet as the table presented there is missing some information.
> The reference presents these values as being linear,
> but that does not add up. There is information missing in the table.
> Implemented scale table matches values at the middle and at the ends,
> smoothing the curve towards middle and end.
> Impact on end result from deviation in scale factor affects only software
> using it for scaling. All the possible hw-settings are also available with
> this implementation.

> Link: https://www.analog.com/media/en/technical-documentation/data-sheets/AD9211.pdf

Datasheet: https://www.analog.com/media/en/technical-documentation/data-sheets/AD9211.pdf

> Signed-off-by: Tomas Melin <tomas.melin@vaisala.com>

...

> +static const struct ad9467_chip_info ad9211_chip_tbl = {
> +	.name = "ad9211",
> +	.id = CHIPID_AD9211,
> +	.max_rate = 300000000UL,

It's too many 0:s. Less error prone is to write it as

	300 * HZ_PER_MHZ

> +	.scale_table = ad9211_scale_table,
> +	.num_scales = ARRAY_SIZE(ad9211_scale_table),
> +	.channels = ad9211_channels,
> +	.num_channels = ARRAY_SIZE(ad9211_channels),
> +	.test_points = AD9647_MAX_TEST_POINTS,
> +	.test_mask = GENMASK(AN877_ADC_TESTMODE_ONE_ZERO_TOGGLE,
> +			     AN877_ADC_TESTMODE_OFF),
> +	.test_mask_len = AN877_ADC_TESTMODE_ONE_ZERO_TOGGLE + 1,
> +	.default_output_mode = AD9211_DEF_OUTPUT_MODE,
> +	.vref_mask = AD9211_REG_VREF_MASK,
> +	.has_dco = true,
> +};

-- 
With Best Regards,
Andy Shevchenko