Hi,

On Sat, Dec 20, 2025 at 11:46:24PM +0100, Waqar Hameed wrote:
> Instead of handling the registration manually, use the automatic
> `devres` variant `devm_power_supply_register()`. This is less error
> prone and cleaner.
> 
> Signed-off-by: Waqar Hameed <waqar.hameed@axis.com>
> ---
>  drivers/power/supply/wm97xx_battery.c | 8 ++------
>  1 file changed, 2 insertions(+), 6 deletions(-)
> 
> diff --git a/drivers/power/supply/wm97xx_battery.c b/drivers/power/supply/wm97xx_battery.c
> index f00722c88c6fe..e91467dcab19c 100644
> --- a/drivers/power/supply/wm97xx_battery.c
> +++ b/drivers/power/supply/wm97xx_battery.c
> @@ -223,7 +223,7 @@ static int wm97xx_bat_probe(struct platform_device *dev)
>  	bat_psy_desc.properties = prop;
>  	bat_psy_desc.num_properties = props;
>  
> -	bat_psy = power_supply_register(&dev->dev, &bat_psy_desc, &cfg);
> +	bat_psy = devm_power_supply_register(&dev->dev, &bat_psy_desc, &cfg);
>  	if (!IS_ERR(bat_psy)) {
>  		schedule_work(&bat_work);
>  	} else {
> @@ -237,15 +237,12 @@ static int wm97xx_bat_probe(struct platform_device *dev)
>  		if (ret) {
>  			dev_err_probe(&dev->dev, ret,
>  				      "failed to request GPIO irq\n");
> -			goto unregister;
> +			goto free;
>  		}
>  	}
>  
>  	return 0;
>  
> -unregister:
> -	power_supply_unregister(bat_psy);
> -
>  free:
>  	kfree(prop);
>  
> @@ -257,7 +254,6 @@ static void wm97xx_bat_remove(struct platform_device *dev)
>  	if (charge_gpiod)
>  		free_irq(gpiod_to_irq(charge_gpiod), dev);
>  	cancel_work_sync(&bat_work);
> -	power_supply_unregister(bat_psy);
>  	kfree(prop);
>  }

This free's prop before bat_psy. You fix that in the next patch, but
to be bisectable those two patches must be swapped.

Greetings,

-- Sebastian