From: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
To: Manivannan Sadhasivam <mani@kernel.org>
Cc: "Dmitry Torokhov" <dmitry.torokhov@gmail.com>,
manivannan.sadhasivam@oss.qualcomm.com,
"Rob Herring" <robh@kernel.org>,
"Greg Kroah-Hartman" <gregkh@linuxfoundation.org>,
"Jiri Slaby" <jirislaby@kernel.org>,
"Nathan Chancellor" <nathan@kernel.org>,
"Nicolas Schier" <nicolas.schier@linux.dev>,
"Hans de Goede" <hansg@kernel.org>,
"Ilpo Järvinen" <ilpo.jarvinen@linux.intel.com>,
"Mark Pearson" <mpearson-lenovo@squebb.ca>,
"Derek J. Clark" <derekjohn.clark@gmail.com>,
"Krzysztof Kozlowski" <krzk+dt@kernel.org>,
"Conor Dooley" <conor+dt@kernel.org>,
"Marcel Holtmann" <marcel@holtmann.org>,
"Luiz Augusto von Dentz" <luiz.dentz@gmail.com>,
"Bartosz Golaszewski" <brgl@bgdev.pl>,
"Daniel Scally" <djrscally@gmail.com>,
"Heikki Krogerus" <heikki.krogerus@linux.intel.com>,
"Sakari Ailus" <sakari.ailus@linux.intel.com>,
"Rafael J. Wysocki" <rafael@kernel.org>,
"Danilo Krummrich" <dakr@kernel.org>,
"Bartosz Golaszewski" <brgl@kernel.org>,
linux-serial@vger.kernel.org, linux-kernel@vger.kernel.org,
linux-kbuild@vger.kernel.org,
platform-driver-x86@vger.kernel.org, linux-pci@vger.kernel.org,
devicetree@vger.kernel.org, linux-arm-msm@vger.kernel.org,
linux-bluetooth@vger.kernel.org, linux-pm@vger.kernel.org,
"Stephan Gerhold" <stephan.gerhold@linaro.org>,
"Dmitry Baryshkov" <dmitry.baryshkov@oss.qualcomm.com>,
linux-acpi@vger.kernel.org,
"Sui Jingfeng" <sui.jingfeng@linux.dev>
Subject: Re: [PATCH v3 03/14] software node: Implement device_get_match_data fwnode callback
Date: Mon, 12 Jan 2026 10:27:45 +0200 [thread overview]
Message-ID: <aWSwgRiEkT9unYw9@smile.fi.intel.com> (raw)
In-Reply-To: <6l3rs5pv6xnrbygpvqrdxqoqtybjyefsltk5bl4336q56rfoza@ejo3sxuufghe>
On Mon, Jan 12, 2026 at 01:49:54PM +0530, Manivannan Sadhasivam wrote:
> + Dmitry Torokhov (who was against this patch previously)
>
> On Mon, Jan 12, 2026 at 09:56:06AM +0200, Andy Shevchenko wrote:
> > On Sat, Jan 10, 2026 at 12:26:21PM +0530, Manivannan Sadhasivam via B4 Relay wrote:
> >
> > > Because the software node backend of the fwnode API framework lacks an
> > > implementation for the .device_get_match_data function callback.
> >
> > Maybe this is done on purpose. Have you thought about this aspect?
>
> IMO, software nodes were introduced to add sub-properties to the existing
> firmware nodes, but it has usecase/potential to go beyond that. More below.
Potential doesn't mean the necessity.
> > > This makes it difficult to use(and/or test) a few drivers that originates
> > > from DT world on the non-DT platform.
> >
> > How difficult? DSA implementation went to the way of taking DT overlay
> > approach. Why that one can't be applied here?
>
> Sometimes you do not have any DT node at all.
Yes, that is exactly the case I have referred to. The PCI core (in Linux)
is able to create DT subtree on non-OF based platforms.
> For example, in this series, the
> M.2 pwrseq driver creates the serdev software device for the M.2 BT card to
> match it with the existing OF based BT driver (for non-M2 device). From the
> driver's point of view, a BT device attached to the M.2 slot and over custom
> connectors are both the same. Only difference is that, in the case of custom
> connectors, the bluetooth DT node will have the BT device described and in the
> case of M.2, the device won't get described, but just the connector [1].
So, what's the problem to add such a description? (Assuming you want a customisation
it can be done at run-time, correct?)
> But for the driver to identify the device (since it cannot enumerate it),
> either it has to rely on DT/ACPI or some other means.
Yes.
> In the previous version of this series [2], I used the serdev ID based on the
> product name for creating the serdev device and added a new id_table for serdev
> driver to match with the device [3]. This almost duplicated the existing OF
> match logic.
That's how we do when we want to add a board file, but thing is that we do not
want board files (only in the cases when other ways are impossible or make less
sense).
> Then Bartosz suggested to use swnode approach [4], to get rid of
> the custom serdev ID based matching. When I prototyped, it mostly worked well,
I know that Bart is fan of swnodes, but it should not be used as a silver
bullet, really.
> except that swnode needed to have its own .device_get_match_data(), match() and
> uevent/modalias functions. And if the swnode reused the existing DT compatible
> string, it can work with the existing BT driver without modifications. And this
> approach can also be extended to devices instantiated from the board specific
> drivers.
DT overlay should work without even modifications done to swnode code, right?
> [1] https://lore.kernel.org/all/20260110-pci-m2-e-v3-10-4faee7d0d5ae@oss.qualcomm.com/
> [2] https://lore.kernel.org/all/20251125-pci-m2-e-v2-0-32826de07cc5@oss.qualcomm.com/
> [3] https://lore.kernel.org/all/20251125-pci-m2-e-v2-2-32826de07cc5@oss.qualcomm.com/
> [4] https://lore.kernel.org/all/CAMRc=Mc-WebsQZ3jt2xirioNMticiWj9PJ3fsPTXGCeJ1iTLRg@mail.gmail.com/
>
> > > Implement the .device_get_match_data fwnode callback, which helps to keep
> > > the three backends of the fwnode API aligned as much as possible. This is
> > > also a fundamental step to make a few drivers OF-independent truely
> > > possible.
> > >
> > > Device drivers or platform setup codes are expected to provide a software
> > > node string property, named as "compatible". At this moment, the value of
> > > this string property is being used to match against the compatible entries
> > > in the of_device_id table. It can be extended in the future though.
> >
> > I really do not want to see this patch without very good justification
> > (note, there were at least two attempts in the past to add this stuff
> > and no-one was merged, have you studied those cases?).
>
> Yes I did. I didn't put the above justification in the cover letter, as it was
> already overwhelmed with too much information regarding the connector node.
> Maybe I should've added it in the comments section of this patch. But I didn't
> know how to do that with b4.
Then you missed it. The cover letter for such a change is way too short.
--
With Best Regards,
Andy Shevchenko
next prev parent reply other threads:[~2026-01-12 8:27 UTC|newest]
Thread overview: 43+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-01-10 6:56 [PATCH v3 00/14] Add support for handling PCIe M.2 Key E connectors in devicetree Manivannan Sadhasivam via B4 Relay
2026-01-10 6:56 ` [PATCH v3 01/14] serdev: Convert to_serdev_*() helpers to macros and use container_of_const() Manivannan Sadhasivam via B4 Relay
2026-01-10 6:56 ` [PATCH v3 02/14] serdev: Add an API to find the serdev controller associated with the devicetree node Manivannan Sadhasivam via B4 Relay
2026-01-12 7:50 ` Andy Shevchenko
2026-01-12 7:55 ` Manivannan Sadhasivam
2026-01-12 8:06 ` Andy Shevchenko
2026-01-12 10:59 ` Bartosz Golaszewski
2026-01-10 6:56 ` [PATCH v3 03/14] software node: Implement device_get_match_data fwnode callback Manivannan Sadhasivam via B4 Relay
2026-01-12 7:56 ` Andy Shevchenko
2026-01-12 8:19 ` Manivannan Sadhasivam
2026-01-12 8:27 ` Andy Shevchenko [this message]
2026-01-12 9:02 ` Manivannan Sadhasivam
2026-01-12 16:31 ` Manivannan Sadhasivam
2026-08-14 12:49 ` Manivannan Sadhasivam
2026-08-17 6:35 ` Andy Shevchenko
2026-08-17 13:01 ` Andy Shevchenko
2026-08-31 13:02 ` Manivannan Sadhasivam
2026-01-12 13:37 ` Konstantin Ryabitsev
2026-01-12 16:41 ` Manivannan Sadhasivam
2026-01-14 3:40 ` Sui Jingfeng
[not found] ` <26a001c3-2140-4241-87dd-604eab3f827b@linux.dev>
2026-01-22 8:51 ` Andy Shevchenko
2026-01-10 6:56 ` [PATCH v3 04/14] software node: Add software_node_match_device() API Manivannan Sadhasivam via B4 Relay
2026-01-12 8:31 ` Andy Shevchenko
2026-01-12 11:03 ` Bartosz Golaszewski
2026-01-12 11:15 ` Andy Shevchenko
2026-01-10 6:56 ` [PATCH v3 05/14] software node: Add software_node_device_uevent() API Manivannan Sadhasivam via B4 Relay
2026-01-12 8:09 ` Andy Shevchenko
2026-01-10 6:56 ` [PATCH v3 06/14] software node: Add software_node_device_modalias() API Manivannan Sadhasivam via B4 Relay
2026-01-12 8:32 ` Andy Shevchenko
2026-01-10 6:56 ` [PATCH v3 07/14] serdev: Do not return -ENODEV from of_serdev_register_devices() if external connector is used Manivannan Sadhasivam via B4 Relay
2026-01-10 6:56 ` [PATCH v3 08/14] serdev: Add support for swnode based driver matching and uevent/modalias Manivannan Sadhasivam via B4 Relay
2026-01-10 6:56 ` [PATCH v3 09/14] dt-bindings: serial: Document the graph port Manivannan Sadhasivam via B4 Relay
2026-01-10 6:56 ` [PATCH v3 10/14] dt-bindings: connector: Add PCIe M.2 Mechanical Key E connector Manivannan Sadhasivam via B4 Relay
2026-01-10 6:56 ` [PATCH v3 11/14] dt-bindings: connector: m2: Add M.2 1620 LGA soldered down connector Manivannan Sadhasivam via B4 Relay
2026-01-10 6:56 ` [PATCH v3 12/14] Bluetooth: hci_qca: Add M.2 Bluetooth device support using pwrseq Manivannan Sadhasivam via B4 Relay
2026-01-10 6:56 ` [PATCH v3 13/14] power: sequencing: pcie-m2: Add support for PCIe M.2 Key E connectors Manivannan Sadhasivam via B4 Relay
2026-01-10 6:56 ` [PATCH v3 14/14] power: sequencing: pcie-m2: Create serdev device for WCN7850 bluetooth Manivannan Sadhasivam via B4 Relay
2026-01-12 8:04 ` [PATCH v3 00/14] Add support for handling PCIe M.2 Key E connectors in devicetree Andy Shevchenko
2026-01-12 8:18 ` Andy Shevchenko
2026-01-14 12:40 ` Herve Codina
2026-01-22 8:52 ` Andy Shevchenko
2026-01-12 10:54 ` Bartosz Golaszewski
2026-01-12 16:25 [PATCH v4 0/9] " Manivannan Sadhasivam via B4 Relay
2026-01-12 16:26 ` [PATCH v4 9/9] power: sequencing: pcie-m2: Create serdev device for WCN7850 bluetooth Manivannan Sadhasivam via B4 Relay
2026-01-12 16:43 ` [PATCH v3 03/14] software node: Implement device_get_match_data fwnode callback Manivannan Sadhasivam
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=aWSwgRiEkT9unYw9@smile.fi.intel.com \
--to=andriy.shevchenko@linux.intel.com \
--cc=brgl@bgdev.pl \
--cc=brgl@kernel.org \
--cc=conor+dt@kernel.org \
--cc=dakr@kernel.org \
--cc=derekjohn.clark@gmail.com \
--cc=devicetree@vger.kernel.org \
--cc=djrscally@gmail.com \
--cc=dmitry.baryshkov@oss.qualcomm.com \
--cc=dmitry.torokhov@gmail.com \
--cc=gregkh@linuxfoundation.org \
--cc=hansg@kernel.org \
--cc=heikki.krogerus@linux.intel.com \
--cc=ilpo.jarvinen@linux.intel.com \
--cc=jirislaby@kernel.org \
--cc=krzk+dt@kernel.org \
--cc=linux-acpi@vger.kernel.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-bluetooth@vger.kernel.org \
--cc=linux-kbuild@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pci@vger.kernel.org \
--cc=linux-pm@vger.kernel.org \
--cc=linux-serial@vger.kernel.org \
--cc=luiz.dentz@gmail.com \
--cc=mani@kernel.org \
--cc=manivannan.sadhasivam@oss.qualcomm.com \
--cc=marcel@holtmann.org \
--cc=mpearson-lenovo@squebb.ca \
--cc=nathan@kernel.org \
--cc=nicolas.schier@linux.dev \
--cc=platform-driver-x86@vger.kernel.org \
--cc=rafael@kernel.org \
--cc=robh@kernel.org \
--cc=sakari.ailus@linux.intel.com \
--cc=stephan.gerhold@linaro.org \
--cc=sui.jingfeng@linux.dev \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®