Re: [PATCH v6 2/2] media: i2c: imx412: Extend the power-on waiting time

[Sakari Ailus <sakari.ailus@linux.intel.com>]

Hi Wenmeng,

On Thu, Jan 22, 2026 at 05:31:19PM +0800, Wenmeng Liu wrote:
> The Arducam IMX577 module requires a longer reset time than the 1000µs
> configured in the current driver. Increase the wait time after power-on
> to ensure proper initialization.
> 
> Signed-off-by: Wenmeng Liu <wenmeng.liu@oss.qualcomm.com>
> ---
>  drivers/media/i2c/imx412.c | 6 +++++-
>  1 file changed, 5 insertions(+), 1 deletion(-)
> 
> diff --git a/drivers/media/i2c/imx412.c b/drivers/media/i2c/imx412.c
> index aa63dfc349181bf9c180ffd566b0317d05b410c1..9154c238949e4308755e757bd9c71f0b44f433ee 100644
> --- a/drivers/media/i2c/imx412.c
> +++ b/drivers/media/i2c/imx412.c
> @@ -1037,7 +1037,11 @@ static int imx412_power_on(struct device *dev)
>  		goto error_reset;
>  	}
>  
> -	usleep_range(1000, 1200);
> +	/*
> +	 * Some IMX577 modules require a longer reset settle time.
> +	 * Increasing the delay from 1ms to 10ms ensures reliable startup.
> +	 */

This still doesn't mention the Arducam module. :-(

> +	usleep_range(10000, 12000);
>  
>  	return 0;
>  
> 

-- 
Regards,

Sakari Ailus