From: Jonathan Cameron <jic23@kernel.org>
To: Peter Rosin <peda@axentia.se>, linux-kernel@vger.kernel.org
Cc: Hartmut Knaack <knaack.h@gmx.de>,
Lars-Peter Clausen <lars@metafoo.de>,
Peter Meerwald-Stadler <pmeerw@pmeerw.net>,
Rob Herring <robh+dt@kernel.org>,
Mark Rutland <mark.rutland@arm.com>,
linux-iio@vger.kernel.org, devicetree@vger.kernel.org
Subject: Re: [PATCH v2 2/7] iio: mcp4531: provide range of available raw values
Date: Sun, 23 Oct 2016 10:36:08 +0100 [thread overview]
Message-ID: <aa10fbe2-f902-695e-6f6d-bac5c695ea5c@kernel.org> (raw)
In-Reply-To: <1477176226-10566-3-git-send-email-peda@axentia.se>
On 22/10/16 23:43, Peter Rosin wrote:
> Signed-off-by: Peter Rosin <peda@axentia.se>
Looks great to me.
Perhaps it's worth doing a cat *_available in the directory and pasting
the result here to show what the resulting ABI looks like.
Also new ABI so needs documenting! (you didn't think it would be
this easy did you? :)
J
> ---
> drivers/iio/potentiometer/mcp4531.c | 104 +++++++++++++++++++++---------------
> 1 file changed, 62 insertions(+), 42 deletions(-)
>
> diff --git a/drivers/iio/potentiometer/mcp4531.c b/drivers/iio/potentiometer/mcp4531.c
> index 13b6ae2fcf7b..0d1bcf89ae17 100644
> --- a/drivers/iio/potentiometer/mcp4531.c
> +++ b/drivers/iio/potentiometer/mcp4531.c
> @@ -38,7 +38,7 @@
>
> struct mcp4531_cfg {
> int wipers;
> - int max_pos;
> + int avail[3];
> int kohms;
> };
>
> @@ -78,38 +78,38 @@ enum mcp4531_type {
> };
>
> static const struct mcp4531_cfg mcp4531_cfg[] = {
> - [MCP453x_502] = { .wipers = 1, .max_pos = 128, .kohms = 5, },
> - [MCP453x_103] = { .wipers = 1, .max_pos = 128, .kohms = 10, },
> - [MCP453x_503] = { .wipers = 1, .max_pos = 128, .kohms = 50, },
> - [MCP453x_104] = { .wipers = 1, .max_pos = 128, .kohms = 100, },
> - [MCP454x_502] = { .wipers = 1, .max_pos = 128, .kohms = 5, },
> - [MCP454x_103] = { .wipers = 1, .max_pos = 128, .kohms = 10, },
> - [MCP454x_503] = { .wipers = 1, .max_pos = 128, .kohms = 50, },
> - [MCP454x_104] = { .wipers = 1, .max_pos = 128, .kohms = 100, },
> - [MCP455x_502] = { .wipers = 1, .max_pos = 256, .kohms = 5, },
> - [MCP455x_103] = { .wipers = 1, .max_pos = 256, .kohms = 10, },
> - [MCP455x_503] = { .wipers = 1, .max_pos = 256, .kohms = 50, },
> - [MCP455x_104] = { .wipers = 1, .max_pos = 256, .kohms = 100, },
> - [MCP456x_502] = { .wipers = 1, .max_pos = 256, .kohms = 5, },
> - [MCP456x_103] = { .wipers = 1, .max_pos = 256, .kohms = 10, },
> - [MCP456x_503] = { .wipers = 1, .max_pos = 256, .kohms = 50, },
> - [MCP456x_104] = { .wipers = 1, .max_pos = 256, .kohms = 100, },
> - [MCP463x_502] = { .wipers = 2, .max_pos = 128, .kohms = 5, },
> - [MCP463x_103] = { .wipers = 2, .max_pos = 128, .kohms = 10, },
> - [MCP463x_503] = { .wipers = 2, .max_pos = 128, .kohms = 50, },
> - [MCP463x_104] = { .wipers = 2, .max_pos = 128, .kohms = 100, },
> - [MCP464x_502] = { .wipers = 2, .max_pos = 128, .kohms = 5, },
> - [MCP464x_103] = { .wipers = 2, .max_pos = 128, .kohms = 10, },
> - [MCP464x_503] = { .wipers = 2, .max_pos = 128, .kohms = 50, },
> - [MCP464x_104] = { .wipers = 2, .max_pos = 128, .kohms = 100, },
> - [MCP465x_502] = { .wipers = 2, .max_pos = 256, .kohms = 5, },
> - [MCP465x_103] = { .wipers = 2, .max_pos = 256, .kohms = 10, },
> - [MCP465x_503] = { .wipers = 2, .max_pos = 256, .kohms = 50, },
> - [MCP465x_104] = { .wipers = 2, .max_pos = 256, .kohms = 100, },
> - [MCP466x_502] = { .wipers = 2, .max_pos = 256, .kohms = 5, },
> - [MCP466x_103] = { .wipers = 2, .max_pos = 256, .kohms = 10, },
> - [MCP466x_503] = { .wipers = 2, .max_pos = 256, .kohms = 50, },
> - [MCP466x_104] = { .wipers = 2, .max_pos = 256, .kohms = 100, },
> + [MCP453x_502] = { .wipers = 1, .avail = { 0, 1, 128 }, .kohms = 5, },
> + [MCP453x_103] = { .wipers = 1, .avail = { 0, 1, 128 }, .kohms = 10, },
> + [MCP453x_503] = { .wipers = 1, .avail = { 0, 1, 128 }, .kohms = 50, },
> + [MCP453x_104] = { .wipers = 1, .avail = { 0, 1, 128 }, .kohms = 100, },
> + [MCP454x_502] = { .wipers = 1, .avail = { 0, 1, 128 }, .kohms = 5, },
> + [MCP454x_103] = { .wipers = 1, .avail = { 0, 1, 128 }, .kohms = 10, },
> + [MCP454x_503] = { .wipers = 1, .avail = { 0, 1, 128 }, .kohms = 50, },
> + [MCP454x_104] = { .wipers = 1, .avail = { 0, 1, 128 }, .kohms = 100, },
> + [MCP455x_502] = { .wipers = 1, .avail = { 0, 1, 256 }, .kohms = 5, },
> + [MCP455x_103] = { .wipers = 1, .avail = { 0, 1, 256 }, .kohms = 10, },
> + [MCP455x_503] = { .wipers = 1, .avail = { 0, 1, 256 }, .kohms = 50, },
> + [MCP455x_104] = { .wipers = 1, .avail = { 0, 1, 256 }, .kohms = 100, },
> + [MCP456x_502] = { .wipers = 1, .avail = { 0, 1, 256 }, .kohms = 5, },
> + [MCP456x_103] = { .wipers = 1, .avail = { 0, 1, 256 }, .kohms = 10, },
> + [MCP456x_503] = { .wipers = 1, .avail = { 0, 1, 256 }, .kohms = 50, },
> + [MCP456x_104] = { .wipers = 1, .avail = { 0, 1, 256 }, .kohms = 100, },
> + [MCP463x_502] = { .wipers = 2, .avail = { 0, 1, 128 }, .kohms = 5, },
> + [MCP463x_103] = { .wipers = 2, .avail = { 0, 1, 128 }, .kohms = 10, },
> + [MCP463x_503] = { .wipers = 2, .avail = { 0, 1, 128 }, .kohms = 50, },
> + [MCP463x_104] = { .wipers = 2, .avail = { 0, 1, 128 }, .kohms = 100, },
> + [MCP464x_502] = { .wipers = 2, .avail = { 0, 1, 128 }, .kohms = 5, },
> + [MCP464x_103] = { .wipers = 2, .avail = { 0, 1, 128 }, .kohms = 10, },
> + [MCP464x_503] = { .wipers = 2, .avail = { 0, 1, 128 }, .kohms = 50, },
> + [MCP464x_104] = { .wipers = 2, .avail = { 0, 1, 128 }, .kohms = 100, },
> + [MCP465x_502] = { .wipers = 2, .avail = { 0, 1, 256 }, .kohms = 5, },
> + [MCP465x_103] = { .wipers = 2, .avail = { 0, 1, 256 }, .kohms = 10, },
> + [MCP465x_503] = { .wipers = 2, .avail = { 0, 1, 256 }, .kohms = 50, },
> + [MCP465x_104] = { .wipers = 2, .avail = { 0, 1, 256 }, .kohms = 100, },
> + [MCP466x_502] = { .wipers = 2, .avail = { 0, 1, 256 }, .kohms = 5, },
> + [MCP466x_103] = { .wipers = 2, .avail = { 0, 1, 256 }, .kohms = 10, },
> + [MCP466x_503] = { .wipers = 2, .avail = { 0, 1, 256 }, .kohms = 50, },
> + [MCP466x_104] = { .wipers = 2, .avail = { 0, 1, 256 }, .kohms = 100, },
> };
>
> #define MCP4531_WRITE (0 << 2)
> @@ -124,13 +124,14 @@ struct mcp4531_data {
> const struct mcp4531_cfg *cfg;
> };
>
> -#define MCP4531_CHANNEL(ch) { \
> - .type = IIO_RESISTANCE, \
> - .indexed = 1, \
> - .output = 1, \
> - .channel = (ch), \
> - .info_mask_separate = BIT(IIO_CHAN_INFO_RAW), \
> - .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE), \
> +#define MCP4531_CHANNEL(ch) { \
> + .type = IIO_RESISTANCE, \
> + .indexed = 1, \
> + .output = 1, \
> + .channel = (ch), \
> + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW), \
> + .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE), \
> + .info_mask_shared_by_type_available = BIT(IIO_CHAN_INFO_RAW), \
> }
>
> static const struct iio_chan_spec mcp4531_channels[] = {
> @@ -156,13 +157,31 @@ static int mcp4531_read_raw(struct iio_dev *indio_dev,
> return IIO_VAL_INT;
> case IIO_CHAN_INFO_SCALE:
> *val = 1000 * data->cfg->kohms;
> - *val2 = data->cfg->max_pos;
> + *val2 = data->cfg->avail[2];
> return IIO_VAL_FRACTIONAL;
> }
>
> return -EINVAL;
> }
>
> +static int mcp4531_read_avail(struct iio_dev *indio_dev,
> + struct iio_chan_spec const *chan,
> + const int **vals, int *type, int *length,
> + long mask)
> +{
> + struct mcp4531_data *data = iio_priv(indio_dev);
> +
> + switch (mask) {
> + case IIO_CHAN_INFO_RAW:
> + *length = ARRAY_SIZE(data->cfg->avail);
> + *vals = data->cfg->avail;
> + *type = IIO_VAL_INT;
> + return IIO_AVAIL_RANGE;
> + }
> +
> + return -EINVAL;
> +}
> +
> static int mcp4531_write_raw(struct iio_dev *indio_dev,
> struct iio_chan_spec const *chan,
> int val, int val2, long mask)
> @@ -172,7 +191,7 @@ static int mcp4531_write_raw(struct iio_dev *indio_dev,
>
> switch (mask) {
> case IIO_CHAN_INFO_RAW:
> - if (val > data->cfg->max_pos || val < 0)
> + if (val > data->cfg->avail[2] || val < 0)
> return -EINVAL;
> break;
> default:
> @@ -186,6 +205,7 @@ static int mcp4531_write_raw(struct iio_dev *indio_dev,
>
> static const struct iio_info mcp4531_info = {
> .read_raw = mcp4531_read_raw,
> + .read_avail = mcp4531_read_avail,
> .write_raw = mcp4531_write_raw,
> .driver_module = THIS_MODULE,
> };
>
next prev parent reply other threads:[~2016-10-23 9:36 UTC|newest]
Thread overview: 15+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-10-22 22:43 [PATCH v2 0/7] IIO wrapper drivers, dpot-dac and envelope-detector Peter Rosin
2016-10-22 22:43 ` [PATCH v2 1/7] iio:core: add a callback to allow drivers to provide _available attributes Peter Rosin
2016-10-23 9:33 ` Jonathan Cameron
2016-10-23 22:10 ` Peter Rosin
2016-10-22 22:43 ` [PATCH v2 2/7] iio: mcp4531: provide range of available raw values Peter Rosin
2016-10-23 9:36 ` Jonathan Cameron [this message]
2016-10-22 22:43 ` [PATCH v2 3/7] dt-bindings: add axentia to vendor-prefixes Peter Rosin
2016-10-22 22:43 ` [PATCH v2 4/7] dt-bindings: iio: document dpot-dac bindings Peter Rosin
2016-10-23 8:02 ` Peter Meerwald-Stadler
2016-10-22 22:43 ` [PATCH v2 5/7] iio: dpot-dac: DAC driver based on a digital potentiometer Peter Rosin
2016-10-23 9:42 ` Jonathan Cameron
2016-10-22 22:43 ` [PATCH v2 6/7] dt-bindings: iio: document envelope-detector bindings Peter Rosin
2016-10-23 9:01 ` Peter Rosin
2016-10-22 22:43 ` [PATCH v2 7/7] iio: envelope-detector: ADC driver based on a DAC and a comparator Peter Rosin
2016-10-23 9:48 ` Jonathan Cameron
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=aa10fbe2-f902-695e-6f6d-bac5c695ea5c@kernel.org \
--to=jic23@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=knaack.h@gmx.de \
--cc=lars@metafoo.de \
--cc=linux-iio@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mark.rutland@arm.com \
--cc=peda@axentia.se \
--cc=pmeerw@pmeerw.net \
--cc=robh+dt@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®