From: Minas Harutyunyan <Minas.Harutyunyan@synopsys.com>
To: Geert Uytterhoeven <geert+renesas@glider.be>,
Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
Li Yang <leoyang.li@nxp.com>, Felipe Balbi <balbi@kernel.org>,
Bin Liu <b-liu@ti.com>, Jiri Kosina <trivial@kernel.org>
Cc: "linux-usb@vger.kernel.org" <linux-usb@vger.kernel.org>,
"linux-kernel@vger.kernel.org" <linux-kernel@vger.kernel.org>
Subject: Re: [PATCH trivial] usb: Spelling s/enpoint/endpoint/
Date: Fri, 25 Oct 2019 05:30:18 +0000 [thread overview]
Message-ID: <aa4cfba1-45de-a646-adde-3eedc8c2341e@synopsys.com> (raw)
In-Reply-To: <20191024152833.30698-1-geert+renesas@glider.be>
On 10/24/2019 7:28 PM, Geert Uytterhoeven wrote:
> Fix misspellings of "endpoint".
>
> Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Minas Harutyunyan <hminas@synopsys.com>
> ---
> drivers/usb/dwc2/core.h | 2 +-
> drivers/usb/gadget/udc/fsl_qe_udc.h | 4 ++--
> drivers/usb/gadget/udc/mv_u3d.h | 2 +-
> drivers/usb/musb/musb_gadget.c | 2 +-
> 4 files changed, 5 insertions(+), 5 deletions(-)
>
> diff --git a/drivers/usb/dwc2/core.h b/drivers/usb/dwc2/core.h
> index d08d070a0fb6f598..968e03b89d04d5d8 100644
> --- a/drivers/usb/dwc2/core.h
> +++ b/drivers/usb/dwc2/core.h
> @@ -134,7 +134,7 @@ struct dwc2_hsotg_req;
> * @target_frame: Targeted frame num to setup next ISOC transfer
> * @frame_overrun: Indicates SOF number overrun in DSTS
> *
> - * This is the driver's state for each registered enpoint, allowing it
> + * This is the driver's state for each registered endpoint, allowing it
> * to keep track of transactions that need doing. Each endpoint has a
> * lock to protect the state, to try and avoid using an overall lock
> * for the host controller as much as possible.
> diff --git a/drivers/usb/gadget/udc/fsl_qe_udc.h b/drivers/usb/gadget/udc/fsl_qe_udc.h
> index 2c537a904ee73950..53ca0ff7c2cbd48c 100644
> --- a/drivers/usb/gadget/udc/fsl_qe_udc.h
> +++ b/drivers/usb/gadget/udc/fsl_qe_udc.h
> @@ -333,8 +333,8 @@ struct qe_udc {
> u32 resume_state; /* USB state to resume*/
> u32 usb_state; /* USB current state */
> u32 usb_next_state; /* USB next state */
> - u32 ep0_state; /* Enpoint zero state */
> - u32 ep0_dir; /* Enpoint zero direction: can be
> + u32 ep0_state; /* Endpoint zero state */
> + u32 ep0_dir; /* Endpoint zero direction: can be
> USB_DIR_IN or USB_DIR_OUT*/
> u32 usb_sof_count; /* SOF count */
> u32 errors; /* USB ERRORs count */
> diff --git a/drivers/usb/gadget/udc/mv_u3d.h b/drivers/usb/gadget/udc/mv_u3d.h
> index 982625b7197a0d9c..66b84f792f646bb9 100644
> --- a/drivers/usb/gadget/udc/mv_u3d.h
> +++ b/drivers/usb/gadget/udc/mv_u3d.h
> @@ -138,7 +138,7 @@ struct mv_u3d_op_regs {
> u32 doorbell; /* doorbell register */
> };
>
> -/* control enpoint enable registers */
> +/* control endpoint enable registers */
> struct epxcr {
> u32 epxoutcr0; /* ep out control 0 register */
> u32 epxoutcr1; /* ep out control 1 register */
> diff --git a/drivers/usb/musb/musb_gadget.c b/drivers/usb/musb/musb_gadget.c
> index 2cb31fc0cd601eb4..f62ffaede1abba48 100644
> --- a/drivers/usb/musb/musb_gadget.c
> +++ b/drivers/usb/musb/musb_gadget.c
> @@ -1315,7 +1315,7 @@ static int musb_gadget_dequeue(struct usb_ep *ep, struct usb_request *request)
> }
>
> /*
> - * Set or clear the halt bit of an endpoint. A halted enpoint won't tx/rx any
> + * Set or clear the halt bit of an endpoint. A halted endpoint won't tx/rx any
> * data but will queue requests.
> *
> * exported to ep0 code
>
next prev parent reply other threads:[~2019-10-25 5:30 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-10-24 15:28 Geert Uytterhoeven
2019-10-25 5:30 ` Minas Harutyunyan [this message]
2019-10-25 19:27 ` Li Yang
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=aa4cfba1-45de-a646-adde-3eedc8c2341e@synopsys.com \
--to=minas.harutyunyan@synopsys.com \
--cc=b-liu@ti.com \
--cc=balbi@kernel.org \
--cc=geert+renesas@glider.be \
--cc=gregkh@linuxfoundation.org \
--cc=leoyang.li@nxp.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-usb@vger.kernel.org \
--cc=trivial@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®