From: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
To: Jacopo Mondi <jacopo+renesas@jmondi.org>,
laurent.pinchart+renesas@ideasonboard.com,
niklas.soderlund+renesas@ragnatech.se, geert@linux-m68k.org
Cc: Mauro Carvalho Chehab <mchehab@kernel.org>,
linux-media@vger.kernel.org, linux-renesas-soc@vger.kernel.org,
linux-kernel@vger.kernel.org
Subject: Re: [PATCH 16/16] media: i2c: gmsl: Use 339Kbps I2C bit-rate
Date: Thu, 18 Feb 2021 16:07:30 +0000 [thread overview]
Message-ID: <aa7d8a9c-93a0-8c14-4fe4-b831e7b45d88@ideasonboard.com> (raw)
In-Reply-To: <20210216174146.106639-17-jacopo+renesas@jmondi.org>
On 16/02/2021 17:41, Jacopo Mondi wrote:
> With the camera modules initialization routines now running with
> the noise immunity threshold enabled, it is possible to restore
> the bit rate of the I2C transactions transported on the GMSL control
> channel to 339 Kbps.
>
> The 339 Kbps bit rate represents the default setting for the serializer
> and the deserializer chips, and the setup/hold time and slave timeout
> time in use are calibrate to support that rate.
s/calibrate/calibrated/
Does that mean the setup/hold time and timeouts should be adjusted based
on the i2c speed? (which we have not been doing?)
With all of your other reliability improvements, does *this* change
alone have any difference or impact on reliability?
I.e. if we go slower (stay at current speed) - would we be more reliable?
Is there a reliability improvement by making this speed faster?
I presume we don't have a way to convey the i2c bus speed between the
max9286 and the max9271 currently? Seems a bit like a bus parameter....
> Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
> ---
> drivers/media/i2c/max9286.c | 2 +-
> drivers/media/i2c/rdacm20.c | 2 +-
> drivers/media/i2c/rdacm21.c | 2 +-
> 3 files changed, 3 insertions(+), 3 deletions(-)
>
> diff --git a/drivers/media/i2c/max9286.c b/drivers/media/i2c/max9286.c
> index aa01d5bb79ef..0b620f2f8c41 100644
> --- a/drivers/media/i2c/max9286.c
> +++ b/drivers/media/i2c/max9286.c
> @@ -330,7 +330,7 @@ static int max9286_i2c_mux_init(struct max9286_priv *priv)
> static void max9286_configure_i2c(struct max9286_priv *priv, bool localack)
> {
> u8 config = MAX9286_I2CSLVSH_469NS_234NS | MAX9286_I2CSLVTO_1024US |
> - MAX9286_I2CMSTBT_105KBPS;
> + MAX9286_I2CMSTBT_339KBPS;
>
> if (localack)
> config |= MAX9286_I2CLOCACK;
> diff --git a/drivers/media/i2c/rdacm20.c b/drivers/media/i2c/rdacm20.c
> index 0632ef98eea7..d45e8b0e52a0 100644
> --- a/drivers/media/i2c/rdacm20.c
> +++ b/drivers/media/i2c/rdacm20.c
> @@ -450,7 +450,7 @@ static int rdacm20_init(struct v4l2_subdev *sd, unsigned int val)
> ret = max9271_configure_i2c(&dev->serializer,
> MAX9271_I2CSLVSH_469NS_234NS |
> MAX9271_I2CSLVTO_1024US |
> - MAX9271_I2CMSTBT_105KBPS);
> + MAX9271_I2CMSTBT_339KBPS);
> if (ret)
> return ret;
>
> diff --git a/drivers/media/i2c/rdacm21.c b/drivers/media/i2c/rdacm21.c
> index 80b6f16f87a8..552985026458 100644
> --- a/drivers/media/i2c/rdacm21.c
> +++ b/drivers/media/i2c/rdacm21.c
> @@ -442,7 +442,7 @@ static int rdacm21_init(struct v4l2_subdev *sd, unsigned int val)
> ret = max9271_configure_i2c(&dev->serializer,
> MAX9271_I2CSLVSH_469NS_234NS |
> MAX9271_I2CSLVTO_1024US |
> - MAX9271_I2CMSTBT_105KBPS);
> + MAX9271_I2CMSTBT_339KBPS);
> if (ret)
> return ret;
>
>
next prev parent reply other threads:[~2021-02-18 18:29 UTC|newest]
Thread overview: 65+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-02-16 17:41 [PATCH 00/16] media: i2c: GMSL reliability improvements Jacopo Mondi
2021-02-16 17:41 ` [PATCH 01/16] media: i2c: rdacm20: Enable noise immunity Jacopo Mondi
2021-02-17 12:55 ` Kieran Bingham
2021-02-22 0:49 ` Laurent Pinchart
2021-02-22 14:59 ` Jacopo Mondi
2021-02-24 20:35 ` Laurent Pinchart
2021-02-16 17:41 ` [PATCH 02/16] media: i2c: rdacm20: Embedded 'serializer' field Jacopo Mondi
2021-02-17 12:56 ` Kieran Bingham
2021-02-22 0:58 ` Laurent Pinchart
2021-02-16 17:41 ` [PATCH 03/16] media: i2c: rdacm20: Replace goto with a loop Jacopo Mondi
2021-02-17 13:01 ` Kieran Bingham
2021-02-22 1:05 ` Laurent Pinchart
2021-02-22 15:06 ` Jacopo Mondi
2021-02-24 20:27 ` Laurent Pinchart
2021-02-25 8:56 ` Kieran Bingham
2021-02-16 17:41 ` [PATCH 04/16] media: i2c: rdacm20: Report camera module name Jacopo Mondi
2021-02-17 13:02 ` Kieran Bingham
2021-02-22 1:06 ` Laurent Pinchart
2021-02-16 17:41 ` [PATCH 05/16] media: i2c: rdacm20: Check return values Jacopo Mondi
2021-02-17 13:08 ` Kieran Bingham
2021-02-22 1:09 ` Laurent Pinchart
2021-02-22 15:08 ` Jacopo Mondi
2021-02-16 17:41 ` [PATCH 06/16] media: i2c: rdacm20: Re-work ov10635 reset Jacopo Mondi
2021-02-17 13:22 ` Kieran Bingham
2021-02-22 1:15 ` Laurent Pinchart
2021-02-16 17:41 ` [PATCH 07/16] media: i2c: rdacm2x: Fix wake up delay Jacopo Mondi
2021-02-17 8:02 ` Geert Uytterhoeven
2021-02-17 13:33 ` Kieran Bingham
2021-02-22 1:18 ` Laurent Pinchart
2021-02-22 15:11 ` Jacopo Mondi
2021-02-24 20:29 ` Laurent Pinchart
2021-02-16 17:41 ` [PATCH 08/16] media: i2c: max9286: Adjust parameters indent Jacopo Mondi
2021-02-17 13:36 ` Kieran Bingham
2021-02-22 1:20 ` Laurent Pinchart
2021-02-16 17:41 ` [PATCH 09/16] media: i2c: rdacm21: Re-work OV10640 initialization Jacopo Mondi
2021-02-17 8:06 ` Geert Uytterhoeven
2021-02-17 13:55 ` Kieran Bingham
2021-02-22 1:27 ` Laurent Pinchart
2021-02-22 15:19 ` Jacopo Mondi
2021-02-24 20:30 ` Laurent Pinchart
2021-02-16 17:41 ` [PATCH 10/16] media: i2c: max9286: Rename reverse_channel_mv Jacopo Mondi
2021-02-17 8:07 ` Geert Uytterhoeven
2021-02-18 15:06 ` Kieran Bingham
2021-02-22 1:29 ` Laurent Pinchart
2021-02-16 17:41 ` [PATCH 11/16] media: i2c: max9286: Cache channel amplitude Jacopo Mondi
2021-02-17 8:08 ` Geert Uytterhoeven
2021-02-18 15:39 ` Kieran Bingham
2021-02-22 1:33 ` Laurent Pinchart
2021-02-16 17:41 ` [PATCH 12/16] media: i2c: max9286: Define high " Jacopo Mondi
2021-02-18 15:39 ` Kieran Bingham
2021-02-22 1:35 ` Laurent Pinchart
2021-02-16 17:41 ` [PATCH 13/16] media: i2c: rdacm2x: Implement .init() subdev op Jacopo Mondi
2021-02-17 8:17 ` Geert Uytterhoeven
2021-02-18 16:13 ` Kieran Bingham
2021-02-22 1:52 ` Laurent Pinchart
2021-02-16 17:41 ` [PATCH 14/16] media: i2c: max9286: Initialize remotes when bound Jacopo Mondi
2021-02-17 8:19 ` Geert Uytterhoeven
2021-02-18 16:00 ` Kieran Bingham
2021-02-22 2:03 ` Laurent Pinchart
2021-02-16 17:41 ` [PATCH 15/16] media: i2c: max9286: Rework comments in .bound() Jacopo Mondi
2021-02-18 16:03 ` Kieran Bingham
2021-02-16 17:41 ` [PATCH 16/16] media: i2c: gmsl: Use 339Kbps I2C bit-rate Jacopo Mondi
2021-02-17 8:19 ` Geert Uytterhoeven
2021-02-18 16:07 ` Kieran Bingham [this message]
2021-02-22 2:06 ` Laurent Pinchart
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=aa7d8a9c-93a0-8c14-4fe4-b831e7b45d88@ideasonboard.com \
--to=kieran.bingham+renesas@ideasonboard.com \
--cc=geert@linux-m68k.org \
--cc=jacopo+renesas@jmondi.org \
--cc=laurent.pinchart+renesas@ideasonboard.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-media@vger.kernel.org \
--cc=linux-renesas-soc@vger.kernel.org \
--cc=mchehab@kernel.org \
--cc=niklas.soderlund+renesas@ragnatech.se \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®