Re: [PATCH V2 2/5] dt-bindings: nvmem: Convert xlnx,zynqmp-nvmem.txt to yaml

[Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>]

On 19/10/2023 08:06, Praveen Teja Kundanala wrote:
> Convert the xlnx,zynqmp-nvmem.txt to yaml.
> 
> Signed-off-by: Praveen Teja Kundanala <praveen.teja.kundanala@amd.com>
> ---
>  .../bindings/nvmem/xlnx,zynqmp-nvmem.txt      | 46 -------------------
>  .../bindings/nvmem/xlnx,zynqmp-nvmem.yaml     | 40 ++++++++++++++++
>  2 files changed, 40 insertions(+), 46 deletions(-)
>  delete mode 100644 Documentation/devicetree/bindings/nvmem/xlnx,zynqmp-nvmem.txt
>  create mode 100644 Documentation/devicetree/bindings/nvmem/xlnx,zynqmp-nvmem.yaml
> 
> diff --git a/Documentation/devicetree/bindings/nvmem/xlnx,zynqmp-nvmem.txt b/Documentation/devicetree/bindings/nvmem/xlnx,zynqmp-nvmem.txt
> deleted file mode 100644
> index 4881561b3a02..000000000000
> --- a/Documentation/devicetree/bindings/nvmem/xlnx,zynqmp-nvmem.txt
> +++ /dev/null
> @@ -1,46 +0,0 @@
> ---------------------------------------------------------------------------
> -=  Zynq UltraScale+ MPSoC nvmem firmware driver binding =
> ---------------------------------------------------------------------------
> -The nvmem_firmware node provides access to the hardware related data
> -like soc revision, IDCODE... etc, By using the firmware interface.
> -
> -Required properties:
> -- compatible: should be "xlnx,zynqmp-nvmem-fw"
> -
> -= Data cells =
> -Are child nodes of silicon id, bindings of which as described in
> -bindings/nvmem/nvmem.txt
> -
> --------
> - Example
> --------
> -firmware {
> -	zynqmp_firmware: zynqmp-firmware {
> -		compatible = "xlnx,zynqmp-firmware";
> -		method = "smc";
> -
> -		nvmem_firmware {
> -			compatible = "xlnx,zynqmp-nvmem-fw";
> -			#address-cells = <1>;
> -			#size-cells = <1>;
> -
> -			/* Data cells */
> -			soc_revision: soc_revision {
> -				reg = <0x0 0x4>;
> -			};
> -		};
> -	};
> -};
> -
> -= Data consumers =
> -Are device nodes which consume nvmem data cells.
> -
> -For example:
> -	pcap {
> -		...
> -
> -		nvmem-cells = <&soc_revision>;
> -		nvmem-cell-names = "soc_revision";
> -
> -		...
> -	};
> diff --git a/Documentation/devicetree/bindings/nvmem/xlnx,zynqmp-nvmem.yaml b/Documentation/devicetree/bindings/nvmem/xlnx,zynqmp-nvmem.yaml
> new file mode 100644
> index 000000000000..5d20362a0615
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/nvmem/xlnx,zynqmp-nvmem.yaml
> @@ -0,0 +1,40 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/nvmem/xlnx,zynqmp-nvmem.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Zynq UltraScale+ MPSoC Non Volatile Memory interface
> +
> +description: |
> +    The ZynqMP MPSoC provides access to the hardware related data
> +    like SOC revision, IDCODE and specific purpose efuses.
> +
> +maintainers:
> +  - Kalyani Akula <kalyani.akula@amd.com>
> +  - Praveen Teja Kundanala <praveen.teja.kundanala@amd.com>
> +
> +allOf:
> +  - $ref: nvmem.yaml#
> +
> +properties:
> +  compatible:
> +    const: xlnx,zynqmp-nvmem-fw
> +
> +required:
> +  - compatible

Test your bindings before sending. I am not a free tester of your
code... It's your duty.

> +
> +unevaluatedProperties: false
> +
> +examples:
> +  - |
> +    nvmem-firmware {

Node names should be generic, so "nvmem". See also an explanation and
list of examples (not exhaustive) in DT specification:
https://devicetree-specification.readthedocs.io/en/latest/chapter2-devicetree-basics.html#generic-names-recommendation

I already asked for this.

Best regards,
Krzysztof