From: Suzuki K Poulose <suzuki.poulose@arm.com>
To: Mike Leach <mike.leach@linaro.org>, Yabin Cui <yabinc@google.com>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>,
Leo Yan <leo.yan@linaro.org>, James Clark <james.clark@arm.com>,
coresight@lists.linaro.org, linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org
Subject: Re: [PATCH v2] coresight: tmc: Don't enable TMC when it's not ready.
Date: Thu, 2 Feb 2023 11:24:06 +0000 [thread overview]
Message-ID: <aacdd394-3008-a7fa-66a8-1db2a8fc1065@arm.com> (raw)
In-Reply-To: <CAJ9a7VjZs_sHz=p-HQfE0gvqWx65776W8Y-gR3ATx-_k+vr7LQ@mail.gmail.com>
Hi Mike,
Thanks for the comments, please note that I have queued this patch for next.
On 01/02/2023 20:43, Mike Leach wrote:
> Hi,
>
> On Fri, 27 Jan 2023 at 23:10, Yabin Cui <yabinc@google.com> wrote:
>>
>> If TMC ETR is enabled without being ready, in later use we may
>> see AXI bus errors caused by accessing invalid addresses.
>>
>> Signed-off-by: Yabin Cui <yabinc@google.com>
>> ---
>> V1 -> V2: Make change to all TMCs instead of just ETR
>>
>> .../hwtracing/coresight/coresight-tmc-core.c | 4 +-
>> .../hwtracing/coresight/coresight-tmc-etf.c | 43 +++++++++++++++----
>> .../hwtracing/coresight/coresight-tmc-etr.c | 18 ++++++--
>> drivers/hwtracing/coresight/coresight-tmc.h | 2 +-
>> 4 files changed, 53 insertions(+), 14 deletions(-)
>>
>> diff --git a/drivers/hwtracing/coresight/coresight-tmc-core.c b/drivers/hwtracing/coresight/coresight-tmc-core.c
>> index 07abf28ad725..c106d142e632 100644
>> --- a/drivers/hwtracing/coresight/coresight-tmc-core.c
>> +++ b/drivers/hwtracing/coresight/coresight-tmc-core.c
>> @@ -31,7 +31,7 @@ DEFINE_CORESIGHT_DEVLIST(etb_devs, "tmc_etb");
>> DEFINE_CORESIGHT_DEVLIST(etf_devs, "tmc_etf");
>> DEFINE_CORESIGHT_DEVLIST(etr_devs, "tmc_etr");
>>
>> -void tmc_wait_for_tmcready(struct tmc_drvdata *drvdata)
>> +int tmc_wait_for_tmcready(struct tmc_drvdata *drvdata)
>> {
>> struct coresight_device *csdev = drvdata->csdev;
>> struct csdev_access *csa = &csdev->access;
>> @@ -40,7 +40,9 @@ void tmc_wait_for_tmcready(struct tmc_drvdata *drvdata)
>> if (coresight_timeout(csa, TMC_STS, TMC_STS_TMCREADY_BIT, 1)) {
>> dev_err(&csdev->dev,
>> "timeout while waiting for TMC to be Ready\n");
>> + return -EBUSY;
>> }
>> + return 0;
>> }
>>
>> void tmc_flush_and_stop(struct tmc_drvdata *drvdata)
>> diff --git a/drivers/hwtracing/coresight/coresight-tmc-etf.c b/drivers/hwtracing/coresight/coresight-tmc-etf.c
>> index 4c4cbd1f7258..2840227e9135 100644
>> --- a/drivers/hwtracing/coresight/coresight-tmc-etf.c
>> +++ b/drivers/hwtracing/coresight/coresight-tmc-etf.c
>> @@ -16,12 +16,19 @@
>> static int tmc_set_etf_buffer(struct coresight_device *csdev,
>> struct perf_output_handle *handle);
>>
>> -static void __tmc_etb_enable_hw(struct tmc_drvdata *drvdata)
>> +static int __tmc_etb_enable_hw(struct tmc_drvdata *drvdata)
>> {
>> + int rc = 0;
>> +
>> CS_UNLOCK(drvdata->base);
>>
>> /* Wait for TMCSReady bit to be set */
>> - tmc_wait_for_tmcready(drvdata);
>> + rc = tmc_wait_for_tmcready(drvdata);
>> + if (rc) {
>> + dev_err(&drvdata->csdev->dev, "fails to enable not ready TMC\n");
>> + CS_LOCK(drvdata->base);
>> + return rc;
>> + }
>>
>> writel_relaxed(TMC_MODE_CIRCULAR_BUFFER, drvdata->base + TMC_MODE);
>> writel_relaxed(TMC_FFCR_EN_FMT | TMC_FFCR_EN_TI |
>> @@ -33,6 +40,7 @@ static void __tmc_etb_enable_hw(struct tmc_drvdata *drvdata)
>> tmc_enable_hw(drvdata);
>>
>> CS_LOCK(drvdata->base);
>> + return rc;
>> }
>>
>> static int tmc_etb_enable_hw(struct tmc_drvdata *drvdata)
>> @@ -42,8 +50,10 @@ static int tmc_etb_enable_hw(struct tmc_drvdata *drvdata)
>> if (rc)
>> return rc;
>>
>> - __tmc_etb_enable_hw(drvdata);
>> - return 0;
>> + rc = __tmc_etb_enable_hw(drvdata);
>> + if (rc)
>> + coresight_disclaim_device(drvdata->csdev);
>> + return rc;
>> }
>>
>> static void tmc_etb_dump_hw(struct tmc_drvdata *drvdata)
>> @@ -91,12 +101,19 @@ static void tmc_etb_disable_hw(struct tmc_drvdata *drvdata)
>> coresight_disclaim_device(drvdata->csdev);
>> }
>>
>> -static void __tmc_etf_enable_hw(struct tmc_drvdata *drvdata)
>> +static int __tmc_etf_enable_hw(struct tmc_drvdata *drvdata)
>> {
>> + int rc = 0;
>> +
>> CS_UNLOCK(drvdata->base);
>>
>> /* Wait for TMCSReady bit to be set */
>> - tmc_wait_for_tmcready(drvdata);
>> + rc = tmc_wait_for_tmcready(drvdata);
>> + if (rc) {
>> + dev_err(&drvdata->csdev->dev, "fails to enable not ready TMC\n");
>> + CS_LOCK(drvdata->base);
>> + return rc;
>> + }
>>
>> writel_relaxed(TMC_MODE_HARDWARE_FIFO, drvdata->base + TMC_MODE);
>> writel_relaxed(TMC_FFCR_EN_FMT | TMC_FFCR_EN_TI,
>> @@ -105,6 +122,7 @@ static void __tmc_etf_enable_hw(struct tmc_drvdata *drvdata)
>> tmc_enable_hw(drvdata);
>>
>> CS_LOCK(drvdata->base);
>> + return rc;
>> }
>>
>> static int tmc_etf_enable_hw(struct tmc_drvdata *drvdata)
>> @@ -114,8 +132,10 @@ static int tmc_etf_enable_hw(struct tmc_drvdata *drvdata)
>> if (rc)
>> return rc;
>>
>> - __tmc_etf_enable_hw(drvdata);
>> - return 0;
>> + rc = __tmc_etf_enable_hw(drvdata);
>> + if (rc)
>> + coresight_disclaim_device(drvdata->csdev);
>> + return rc;
>> }
>>
>> static void tmc_etf_disable_hw(struct tmc_drvdata *drvdata)
>> @@ -639,6 +659,7 @@ int tmc_read_unprepare_etb(struct tmc_drvdata *drvdata)
>> char *buf = NULL;
>> enum tmc_mode mode;
>> unsigned long flags;
>> + int rc = 0;
>>
>> /* config types are set a boot time and never change */
>> if (WARN_ON_ONCE(drvdata->config_type != TMC_CONFIG_TYPE_ETB &&
>> @@ -664,7 +685,11 @@ int tmc_read_unprepare_etb(struct tmc_drvdata *drvdata)
>> * can't be NULL.
>> */
>> memset(drvdata->buf, 0, drvdata->size);
>> - __tmc_etb_enable_hw(drvdata);
>> + rc = __tmc_etb_enable_hw(drvdata);
>> + if (rc) {
>> + spin_unlock_irqrestore(&drvdata->spinlock, flags);
>> + return rc;
>> + }
>
> There is a similar unprepare function in ETR - this should have similar updates.
>
>
>> } else {
>> /*
>> * The ETB/ETF is not tracing and the buffer was just read.
>> diff --git a/drivers/hwtracing/coresight/coresight-tmc-etr.c b/drivers/hwtracing/coresight/coresight-tmc-etr.c
>> index 867ad8bb9b0c..0811cb44588b 100644
>> --- a/drivers/hwtracing/coresight/coresight-tmc-etr.c
>> +++ b/drivers/hwtracing/coresight/coresight-tmc-etr.c
>> @@ -983,15 +983,21 @@ static void tmc_sync_etr_buf(struct tmc_drvdata *drvdata)
>> etr_buf->ops->sync(etr_buf, rrp, rwp);
>> }
>>
>> -static void __tmc_etr_enable_hw(struct tmc_drvdata *drvdata)
>> +static int __tmc_etr_enable_hw(struct tmc_drvdata *drvdata)
>> {
>> u32 axictl, sts;
>> struct etr_buf *etr_buf = drvdata->etr_buf;
>> + int rc = 0;
>>
>> CS_UNLOCK(drvdata->base);
>>
>> /* Wait for TMCSReady bit to be set */
>> - tmc_wait_for_tmcready(drvdata);
>> + rc = tmc_wait_for_tmcready(drvdata);
>> + if (rc) {
>> + dev_err(&drvdata->csdev->dev, "fails to enable not ready TMC\n");
>> + CS_LOCK(drvdata->base);
>> + return rc;
>> + }
>>
>> writel_relaxed(etr_buf->size / 4, drvdata->base + TMC_RSZ);
>> writel_relaxed(TMC_MODE_CIRCULAR_BUFFER, drvdata->base + TMC_MODE);
>> @@ -1032,6 +1038,7 @@ static void __tmc_etr_enable_hw(struct tmc_drvdata *drvdata)
>> tmc_enable_hw(drvdata);
>>
>> CS_LOCK(drvdata->base);
>> + return rc;
>> }
>>
>> static int tmc_etr_enable_hw(struct tmc_drvdata *drvdata,
>> @@ -1060,7 +1067,12 @@ static int tmc_etr_enable_hw(struct tmc_drvdata *drvdata,
>> rc = coresight_claim_device(drvdata->csdev);
>> if (!rc) {
>> drvdata->etr_buf = etr_buf;
>> - __tmc_etr_enable_hw(drvdata);
>> + rc = __tmc_etr_enable_hw(drvdata);
>> + if (rc) {
>> + drvdata->etr_buf = NULL;
>> + coresight_disclaim_device(drvdata->csdev);
>> + tmc_etr_disable_catu(drvdata);
>> + }
>> }
>>
>> return rc;
>> diff --git a/drivers/hwtracing/coresight/coresight-tmc.h b/drivers/hwtracing/coresight/coresight-tmc.h
>> index 66959557cf39..01c0382a29c0 100644
>> --- a/drivers/hwtracing/coresight/coresight-tmc.h
>> +++ b/drivers/hwtracing/coresight/coresight-tmc.h
>> @@ -255,7 +255,7 @@ struct tmc_sg_table {
>> };
>>
>> /* Generic functions */
>> -void tmc_wait_for_tmcready(struct tmc_drvdata *drvdata);
>> +int tmc_wait_for_tmcready(struct tmc_drvdata *drvdata);
>> void tmc_flush_and_stop(struct tmc_drvdata *drvdata);
>> void tmc_enable_hw(struct tmc_drvdata *drvdata);
>> void tmc_disable_hw(struct tmc_drvdata *drvdata);
>> --
>> 2.39.1.456.gfc5497dd1b-goog
>>
>
> The tmc_flush_and_stop() function also calls tmc_wait_for_tmcready().
I think this already an error message there, when it fails to complete
the flush.I thought of adding a WARN_ON, but thought it is not worth much.
>
> The etb/etf_prepare_read operations disable the etb /etf before a
> read commences. For consistency if this fails due to TMC not being
> ready do we also need to fail the read prepare operations?
I think that should be OK, as we can read what the TMC has already
flushed/written to the memory. A following session may not be able
to use the ETR, which is fine.
Cheers
Suzuki
>
> Regards
>
> Mike
>
>
next prev parent reply other threads:[~2023-02-02 11:24 UTC|newest]
Thread overview: 18+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-01-09 23:43 [PATCH] coresight: tmc-etr: Don't enable ETR " Yabin Cui
2023-01-10 9:30 ` James Clark
2023-01-10 17:48 ` Mike Leach
2023-01-10 18:04 ` Suzuki K Poulose
2023-01-10 21:06 ` Yabin Cui
2023-01-24 20:09 ` Yabin Cui
2023-01-25 10:21 ` James Clark
2023-01-25 10:27 ` Suzuki K Poulose
2023-01-27 23:10 ` [PATCH v2] coresight: tmc: Don't enable TMC " Yabin Cui
2023-02-01 20:43 ` Mike Leach
2023-02-02 11:24 ` Suzuki K Poulose [this message]
2023-02-02 20:54 ` Yabin Cui
2023-02-02 21:46 ` [PATCH v3] " Yabin Cui
2023-02-09 1:08 ` Yabin Cui
2023-02-09 10:31 ` Suzuki K Poulose
2023-02-10 23:43 ` [PATCH] coresight: tmc-etr: Handle enable failure in tmc_read_unprepare_etr Yabin Cui
2023-02-21 18:38 ` Yabin Cui
2023-02-22 9:33 ` Suzuki K Poulose
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=aacdd394-3008-a7fa-66a8-1db2a8fc1065@arm.com \
--to=suzuki.poulose@arm.com \
--cc=coresight@lists.linaro.org \
--cc=james.clark@arm.com \
--cc=leo.yan@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mathieu.poirier@linaro.org \
--cc=mike.leach@linaro.org \
--cc=yabinc@google.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®