> On Wed, 4 Mar 2026 09:06:00 +0100 > Francesco Lavra wrote: > > > The DRDY_MASK feature implemented in sensor chips marks gyroscope and > > accelerometer invalid samples (i.e. samples that have been acquired during > > the settling time of sensor filters) with the special values 0x7FFFh, > > 0x7FFE, and 0x7FFD. > > The driver checks FIFO samples against these special values in order to > > discard invalid samples; however, it does the check regardless of the type > > of samples being processed, whereas this feature is specific to gyroscope > > and accelerometer data. This could cause valid samples to be discarded. > > > > Fix the above check so that it takes into account the type of samples being > > processed. To avoid casting to __le16 * when checking sample values, clean > > up the type representation for data read from the FIFO. > > > > Fixes: 960506ed2c69 ("iio: imu: st_lsm6dsx: enable drdy-mask if available") > > Signed-off-by: Francesco Lavra > Looks fine to me, but looking for a Lorenzo tag ideally given it's not > a particularly trivial fix! > > Jonathan Hi Francesco, thx for fixing this, I think the patch is fine, just a couple of nits inline if you need to repost. Regards, Lorenzo Acked-by: Lorenzo Bianconi > > --- > > .../iio/imu/st_lsm6dsx/st_lsm6dsx_buffer.c | 23 +++++++++++-------- > > 1 file changed, 14 insertions(+), 9 deletions(-) > > > > diff --git a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_buffer.c b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_buffer.c > > index 5b28a3ffcc3d..a6ee2da5a06c 100644 > > --- a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_buffer.c > > +++ b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_buffer.c > > @@ -365,8 +365,6 @@ static inline int st_lsm6dsx_read_block(struct st_lsm6dsx_hw *hw, u8 addr, > > return 0; > > } > > > > -#define ST_LSM6DSX_IIO_BUFF_SIZE (ALIGN(ST_LSM6DSX_SAMPLE_SIZE, \ > > - sizeof(s64)) + sizeof(s64)) > > /** > > * st_lsm6dsx_read_fifo() - hw FIFO read routine > > * @hw: Pointer to instance of struct st_lsm6dsx_hw. > > @@ -539,14 +537,14 @@ int st_lsm6dsx_read_fifo(struct st_lsm6dsx_hw *hw) > > #define ST_LSM6DSX_INVALID_SAMPLE 0x7ffd > > static int > > st_lsm6dsx_push_tagged_data(struct st_lsm6dsx_hw *hw, u8 tag, > > - u8 *data, s64 ts) > > + __le16 *data, s64 ts) > > { > > - s16 val = le16_to_cpu(*(__le16 *)data); > > struct st_lsm6dsx_sensor *sensor; > > struct iio_dev *iio_dev; > > > > /* invalid sample during bootstrap phase */ > > - if (val >= ST_LSM6DSX_INVALID_SAMPLE) > > + if ((tag == ST_LSM6DSX_GYRO_TAG || tag == ST_LSM6DSX_ACC_TAG) && > > + (s16)le16_to_cpup(data) >= ST_LSM6DSX_INVALID_SAMPLE) > > return -EINVAL; what about moving this check to a dedicated routine? Like st_lsm6dsx_check_data() or similar? > > > > /* > > @@ -609,7 +607,13 @@ int st_lsm6dsx_read_tagged_fifo(struct st_lsm6dsx_hw *hw) > > * must be passed a buffer that is aligned to 8 bytes so > > * as to allow insertion of a naturally aligned timestamp. > > */ > > - u8 iio_buff[ST_LSM6DSX_IIO_BUFF_SIZE] __aligned(8); > > + struct { > > + union { > > + __le16 data[3]; > > + __le32 fifo_ts; > > + }; > > + aligned_s64 timestamp; > > + } iio_buff = { }; you can get rid of space between brackets. > > u8 tag; > > bool reset_ts = false; > > int i, err, read_len; > > @@ -648,7 +652,7 @@ int st_lsm6dsx_read_tagged_fifo(struct st_lsm6dsx_hw *hw) > > > > for (i = 0; i < pattern_len; > > i += ST_LSM6DSX_TAGGED_SAMPLE_SIZE) { > > - memcpy(iio_buff, &hw->buff[i + ST_LSM6DSX_TAG_SIZE], > > + memcpy(&iio_buff, &hw->buff[i + ST_LSM6DSX_TAG_SIZE], > > ST_LSM6DSX_SAMPLE_SIZE); > > > > tag = hw->buff[i] >> 3; > > @@ -659,7 +663,7 @@ int st_lsm6dsx_read_tagged_fifo(struct st_lsm6dsx_hw *hw) > > * B0 = ts[7:0], B1 = ts[15:8], B2 = ts[23:16], > > * B3 = ts[31:24] > > */ > > - ts = le32_to_cpu(*((__le32 *)iio_buff)); > > + ts = le32_to_cpu(iio_buff.fifo_ts); > > /* > > * check if hw timestamp engine is going to > > * reset (the sensor generates an interrupt > > @@ -670,7 +674,8 @@ int st_lsm6dsx_read_tagged_fifo(struct st_lsm6dsx_hw *hw) > > reset_ts = true; > > ts *= hw->ts_gain; > > } else { > > - st_lsm6dsx_push_tagged_data(hw, tag, iio_buff, > > + st_lsm6dsx_push_tagged_data(hw, tag, > > + iio_buff.data, > > ts); > > } > > } >