Re: [PATCH v6 4/7] mfd: p3h2x4x: Add driver for NXP P3H2x4x i3c hub and on-die regulator

[Frank Li <Frank.li@nxp.com>]

On Tue, Mar 10, 2026 at 12:27:24PM +0530, Lakshay Piplani wrote:
> From: Aman Kumar Pandey <aman.kumarpandey@nxp.com>
>
> Add core MFD support for the NXP P3H2x4x (P3H2440/P3H2441/P3H2840/P3H2841)
> family of multiport I3C hub devices. These devices connect to a host via
> I3C/I2C/SMBus and expose multiple downstream target ports.
>
> Signed-off-by: Aman Kumar Pandey <aman.kumarpandey@nxp.com>
> Signed-off-by: Vikash Bansal <vikash.bansal@nxp.com>
>
...
>
> +config MFD_P3H2X4X
> +       tristate "NXP P3H2X4X I3C Hub Device"
> +       depends on I3C

Use new config I3C_OR_I2C

> +       select MFD_CORE
> +       select REGMAP_I3C
> +       help
> +         Enable Support for NXP P3H244x/P3H284x I3C HUB device using I3C/I2c
> +         communication interface.
> +
> +         This driver provides support for I3C Hub and regulator, additional
> +         drivers must be enabled in order to use the functionality of the device.
> +
...
> +
> +struct p3h2x4x_dev {
> +	struct i3c_device *i3cdev;
> +	struct i2c_client *i2c_client;

Any place use this variable? suppose you get it from regmap's dev by
i2c_get_clientdata()

Frank
> +	struct regmap *regmap;
> +	bool is_p3h2x4x_in_i3c;
> +};
> +#endif /* _LINUX_MFD_P3H2840_H */
> --
> 2.25.1
>