Re: Re: Re: [PATCH] media:v4l2-async:debugfs for registered subdevices

[Sakari Ailus <sakari.ailus@linux.intel.com>]

Hi Luo,

On Fri, Mar 13, 2026 at 09:50:56PM +0800, luo.liu.linux wrote:
> 
> Hi Sakari,
> 
>     Apologies if my previous explanation wasn't clear enough. 
> 
>     To clarify, the primary goal of this interface is not merely to verify if insmod/rmmod succeeds, 
> but to validate the correctness of the asynchronous subdevice registration and unregistration paths,
> specifically ensuring that resource allocation and reclamation are handled properly.
> 
>    I would like to share a real-world scenario that motivated this patch:
> 
>    We had a camera subsystem pipeline like sensor -> dphy -> mipi-csi2 -> isp
> subdevice driver that appeared to function perfectly for six months. insmod and rmmod completed without any errors,
> and the system seemed stable during normal operation. However, just before a major release, a QA engineer performed 
> stress testing involving rapid, repeated cycles of insmod and rmmod, which eventually triggered a kernel crash.
> 
> During the debugging process, I inspected the internal global lists:
> 
> static LIST_HEAD(subdev_list);
> static LIST_HEAD(notifier_list);
> 
> By dumping the subdev_list via this debugfs interface, I discovered that a D-PHY subdevice entry remained in the list even 
> after its driver was unloaded. Crucially, the output explicitly showed the device name, allowing me to immediately pinpoint
> the D-PHY driver as the culprit, rather than blindly troubleshooting other components in the pipeline (such as the sensor or ISP).
> 
> This was the critical clue that led me to the root cause: 
> 
> The D-PHY subdriver's remove function was missing a call to v4l2_async_cleanup(sd). Consequently, the subdevice was never properly 
> unregistered from the async framework, leading to a use-after-free or stale pointer issue during the stress test.
> 
> Without this debugfs interface, detecting such "silent" registration leaks is extremely difficult. 
> The driver loads and unloads without reporting errors, and standard logs (dmesg) often provide
> no indication that an entry was left behind in the core framework's list until a crash occurs under specific timing conditions.
> 
> 
> Given this experience, I believe this interface provides a vital visibility point for engineers to:
> 
> 1,Verify that subdevices are correctly removed from the global list upon driver unload.
> 2,Catch missing cleanup calls (like v4l2_async_cleanup) early in the development cycle, rather than discovering them through random crashes in stress testing.

I guess you'd have found this with either KASAN or linked list debugging?

-- 
Sakari Ailus