Re: [PATCH 2/2] arm64: dts: qcom: Enable tsens and thermal for sa8775p SoC

[Konrad Dybcio <konradybcio@kernel.org>]

On 21.08.2023 13:29, Priyansh Jain wrote:
> Add tsens and thermal devicetree node for sa8775p SoC.
> 
> Signed-off-by: Priyansh Jain <quic_priyjain@quicinc.com>
> ---
>  arch/arm64/boot/dts/qcom/sa8775p.dtsi | 1096 +++++++++++++++++++++++++
>  1 file changed, 1096 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/qcom/sa8775p.dtsi b/arch/arm64/boot/dts/qcom/sa8775p.dtsi
> index b130136acffe..b9c622b3bf7e 100644
> --- a/arch/arm64/boot/dts/qcom/sa8775p.dtsi
> +++ b/arch/arm64/boot/dts/qcom/sa8775p.dtsi
> @@ -2306,6 +2306,1102 @@
>  
>  			#freq-domain-cells = <1>;
>  		};
> +
> +		tsens0: thermal-sensor@c222000 {
> +			compatible = "qcom,sa8775p-tsens", "qcom,tsens-v2";
> +			reg = <0x0C263000 0x1ff>,  /* TM */
> +				<0x0C222000 0x1ff>; /* SROT */
1. Test your patches. This will obviously not work due to the
   #address/size-cells values of /soc@0.

2. Use lowercase hex.

3. Align subsequent entries for a property with the previous line

4. Are you sure SROT is 0x1ff-long?

5. The usefulness of these comments is questionable, many DTs have
   them because of copypasta but I think it's time to stop that.

6. No pdc wake-capable interrupts?

> +			#qcom,sensors = <12>;
> +			interrupts = <GIC_SPI 506 IRQ_TYPE_LEVEL_HIGH>,
> +				<GIC_SPI 508 IRQ_TYPE_LEVEL_HIGH>;
> +			interrupt-names = "uplow","critical";
Missing space after the comma

Please move interrupt properties right after 'reg'.

Konrad