mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Frank Li <Frank.li@nxp.com>
To: Richard Zhu <hongxing.zhu@nxp.com>
Cc: l.stach@pengutronix.de, lpieralisi@kernel.org,
	kwilczynski@kernel.org, mani@kernel.org, robh@kernel.org,
	bhelgaas@google.com, s.hauer@pengutronix.de,
	kernel@pengutronix.de, festevam@gmail.com,
	linux-pci@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
	imx@lists.linux.dev, linux-kernel@vger.kernel.org,
	stable@vger.kernel.org
Subject: Re: [PATCH v3] PCI: imx6: Don't remove MSI capability for i.MX7D/i.MX8M
Date: Thu, 2 Apr 2026 10:30:59 -0400	[thread overview]
Message-ID: <ac59o5IEef9oyx0U@lizhi-Precision-Tower-5810> (raw)
In-Reply-To: <20260331085252.1243108-1-hongxing.zhu@nxp.com>

On Tue, Mar 31, 2026 at 04:52:52PM +0800, Richard Zhu wrote:
> The MSI trigger mechanism for endpoint devices connected to i.MX7D,
> i.MX8MM, and i.MX8MQ PCIe root complex ports depends on the MSI
> capability register settings in the root complex. Removing the MSI
> capability breaks MSI functionality for these endpoints.
>
> Add keep_rp_msi_en flag to indicate platforms (i.MX7D, i.MX8MM, i.MX8MQ)
> that should preserve the MSI capability during initialization.

Reviewed-by: Frank Li <Frank.Li@nxp.com>

>
> Cc: stable@vger.kernel.org
> Fixes: f5cd8a929c825 ("PCI: dwc: Remove MSI/MSIX capability for Root Port if iMSI-RX is used as MSI controller")
> Suggested-by: Manivannan Sadhasivam <mani@kernel.org>
> Signed-off-by: Richard Zhu <hongxing.zhu@nxp.com>
> ---
> v3 changes:
> Use a flag 'dw_pcie_rp::keep_rp_msi_en' to identify SoCs that require MSI
> capability preservation, and skip the capability removal in
> pcie-designware-host.c accordingly.
>
> v2 changes:
> CC stable tree.
> ---
>  drivers/pci/controller/dwc/pci-imx6.c             | 7 +++++++
>  drivers/pci/controller/dwc/pcie-designware-host.c | 2 +-
>  drivers/pci/controller/dwc/pcie-designware.h      | 1 +
>  3 files changed, 9 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/pci/controller/dwc/pci-imx6.c b/drivers/pci/controller/dwc/pci-imx6.c
> index 20dafd2710a3..fde173770933 100644
> --- a/drivers/pci/controller/dwc/pci-imx6.c
> +++ b/drivers/pci/controller/dwc/pci-imx6.c
> @@ -117,6 +117,8 @@ enum imx_pcie_variants {
>  #define IMX_PCIE_FLAG_HAS_LUT			BIT(10)
>  #define IMX_PCIE_FLAG_8GT_ECN_ERR051586		BIT(11)
>  #define IMX_PCIE_FLAG_SKIP_L23_READY		BIT(12)
> +/* Preserve MSI capability for platforms that require it */
> +#define IMX_PCIE_FLAG_KEEP_MSI_CAP		BIT(13)
>
>  #define imx_check_flag(pci, val)	(pci->drvdata->flags & val)
>
> @@ -1820,6 +1822,8 @@ static int imx_pcie_probe(struct platform_device *pdev)
>  	} else {
>  		if (imx_check_flag(imx_pcie, IMX_PCIE_FLAG_SKIP_L23_READY))
>  			pci->pp.skip_l23_ready = true;
> +		if (imx_check_flag(imx_pcie, IMX_PCIE_FLAG_KEEP_MSI_CAP))
> +			pci->pp.keep_rp_msi_en = true;
>  		pci->pp.use_atu_msg = true;
>  		ret = dw_pcie_host_init(&pci->pp);
>  		if (ret < 0)
> @@ -1897,6 +1901,7 @@ static const struct imx_pcie_drvdata drvdata[] = {
>  	[IMX7D] = {
>  		.variant = IMX7D,
>  		.flags = IMX_PCIE_FLAG_SUPPORTS_SUSPEND |
> +			 IMX_PCIE_FLAG_KEEP_MSI_CAP |
>  			 IMX_PCIE_FLAG_HAS_APP_RESET |
>  			 IMX_PCIE_FLAG_SKIP_L23_READY |
>  			 IMX_PCIE_FLAG_HAS_PHY_RESET,
> @@ -1909,6 +1914,7 @@ static const struct imx_pcie_drvdata drvdata[] = {
>  	[IMX8MQ] = {
>  		.variant = IMX8MQ,
>  		.flags = IMX_PCIE_FLAG_HAS_APP_RESET |
> +			 IMX_PCIE_FLAG_KEEP_MSI_CAP |
>  			 IMX_PCIE_FLAG_HAS_PHY_RESET |
>  			 IMX_PCIE_FLAG_SUPPORTS_SUSPEND,
>  		.gpr = "fsl,imx8mq-iomuxc-gpr",
> @@ -1923,6 +1929,7 @@ static const struct imx_pcie_drvdata drvdata[] = {
>  	[IMX8MM] = {
>  		.variant = IMX8MM,
>  		.flags = IMX_PCIE_FLAG_SUPPORTS_SUSPEND |
> +			 IMX_PCIE_FLAG_KEEP_MSI_CAP |
>  			 IMX_PCIE_FLAG_HAS_PHYDRV |
>  			 IMX_PCIE_FLAG_HAS_APP_RESET,
>  		.gpr = "fsl,imx8mm-iomuxc-gpr",
> diff --git a/drivers/pci/controller/dwc/pcie-designware-host.c b/drivers/pci/controller/dwc/pcie-designware-host.c
> index a74339982c24..7b5558561e15 100644
> --- a/drivers/pci/controller/dwc/pcie-designware-host.c
> +++ b/drivers/pci/controller/dwc/pcie-designware-host.c
> @@ -1171,7 +1171,7 @@ int dw_pcie_setup_rc(struct dw_pcie_rp *pp)
>  	 * the MSI and MSI-X capabilities of the Root Port to allow the drivers
>  	 * to fall back to INTx instead.
>  	 */
> -	if (pp->use_imsi_rx) {
> +	if (pp->use_imsi_rx && !pp->keep_rp_msi_en) {
>  		dw_pcie_remove_capability(pci, PCI_CAP_ID_MSI);
>  		dw_pcie_remove_capability(pci, PCI_CAP_ID_MSIX);
>  	}
> diff --git a/drivers/pci/controller/dwc/pcie-designware.h b/drivers/pci/controller/dwc/pcie-designware.h
> index ae6389dd9caa..b12c5334552c 100644
> --- a/drivers/pci/controller/dwc/pcie-designware.h
> +++ b/drivers/pci/controller/dwc/pcie-designware.h
> @@ -421,6 +421,7 @@ struct dw_pcie_host_ops {
>
>  struct dw_pcie_rp {
>  	bool			use_imsi_rx:1;
> +	bool			keep_rp_msi_en:1;
>  	bool			cfg0_io_shared:1;
>  	u64			cfg0_base;
>  	void __iomem		*va_cfg0_base;
> --
> 2.37.1
>

  reply	other threads:[~2026-04-02 14:31 UTC|newest]

Thread overview: 5+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-03-31  8:52 Richard Zhu
2026-04-02 14:30 ` Frank Li [this message]
2026-04-02 16:57 ` Manivannan Sadhasivam
2026-04-03 21:56 ` Bjorn Helgaas
2026-04-04  2:33   ` Manivannan Sadhasivam

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=ac59o5IEef9oyx0U@lizhi-Precision-Tower-5810 \
    --to=frank.li@nxp.com \
    --cc=bhelgaas@google.com \
    --cc=festevam@gmail.com \
    --cc=hongxing.zhu@nxp.com \
    --cc=imx@lists.linux.dev \
    --cc=kernel@pengutronix.de \
    --cc=kwilczynski@kernel.org \
    --cc=l.stach@pengutronix.de \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-pci@vger.kernel.org \
    --cc=lpieralisi@kernel.org \
    --cc=mani@kernel.org \
    --cc=robh@kernel.org \
    --cc=s.hauer@pengutronix.de \
    --cc=stable@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®