From: "sakari.ailus@linux.intel.com" <sakari.ailus@linux.intel.com>
To: "T, Arun" <arun.t@intel.com>
Cc: "johannes.goede@oss.qualcomm.com"
<johannes.goede@oss.qualcomm.com>,
"Kao, Arec" <arec.kao@intel.com>,
"ilpo.jarvinen@linux.intel.com" <ilpo.jarvinen@linux.intel.com>,
"dan.scally@ideasonboard.com" <dan.scally@ideasonboard.com>,
"platform-driver-x86@vger.kernel.org"
<platform-driver-x86@vger.kernel.org>,
"linux-media@vger.kernel.org" <linux-media@vger.kernel.org>,
"linux-kernel@vger.kernel.org" <linux-kernel@vger.kernel.org>,
"Djait, Mehdi" <mehdi.djait@intel.com>
Subject: Re: [PATCH v4 1/2] platform/x86: int3472: Add TPS68470 board data for Intel nvl
Date: Mon, 23 Mar 2026 12:41:47 +0200 [thread overview]
Message-ID: <acEY6_sFAnb3aHY6@kekkonen.localdomain> (raw)
In-Reply-To: <SA3PR11MB80229E0FF7B1E8B32EB35E689D4BA@SA3PR11MB8022.namprd11.prod.outlook.com>
Hi Arun,
On Mon, Mar 23, 2026 at 06:12:29AM +0000, T, Arun wrote:
> Hi All,
>
> There has been no reply to these below patches for quite some time. Could you please provide any feedback, comments, or suggestions on these below patches
>
> https://lore.kernel.org/linux-media/20260306163019.1619490-2-arun.t@intel.com/
> https://lore.kernel.org/all/20260306163019.1619490-3-arun.t@intel.com/
Could you reply to my earlier reviews?
First and foremost, we still have eight regulators configured for a device
that uses three. Some of them have been declared as always_on, too, for no
apparent reason.
>
> -
> Regards,
> Arun T
>
> -----Original Message-----
> From: T, Arun <arun.t@intel.com>
> Sent: 06 March 2026 10:00 PM
> To: T, Arun <arun.t@intel.com>; johannes.goede@oss.qualcomm.com
> Cc: sakari.ailus@linux.intel.com; Kao, Arec <arec.kao@intel.com>; ilpo.jarvinen@linux.intel.com; dan.scally@ideasonboard.com; platform-driver-x86@vger.kernel.org; linux-media@vger.kernel.org; linux-kernel@vger.kernel.org; Djait, Mehdi <mehdi.djait@intel.com>
> Subject: [PATCH v4 1/2] platform/x86: int3472: Add TPS68470 board data for Intel nvl
>
> The Intel NVL platform uses IPU8 is powered by a TPS68470 PMIC,requiring board data to configure the GPIOs and regulators for proper camera sensor operation.
>
> Signed-off-by: Arun T <arun.t@intel.com>
> ---
> .../x86/intel/int3472/tps68470_board_data.c | 150 ++++++++++++++++++
> 1 file changed, 150 insertions(+)
>
> diff --git a/drivers/platform/x86/intel/int3472/tps68470_board_data.c b/drivers/platform/x86/intel/int3472/tps68470_board_data.c
> index 71357a036292..8ae5e01f6660 100644
> --- a/drivers/platform/x86/intel/int3472/tps68470_board_data.c
> +++ b/drivers/platform/x86/intel/int3472/tps68470_board_data.c
> @@ -143,6 +143,34 @@ static struct regulator_consumer_supply int3479_aux2_consumer_supplies[] = {
> REGULATOR_SUPPLY("dovdd", "i2c-INT3479:00"), };
>
> +/* Settings for Intel NVL platform */
> +
> +static struct regulator_consumer_supply int3472_core_consumer_supplies[] = {
> + REGULATOR_SUPPLY("dvdd", "i2c-OVTI13B1:01"), };
> +
> +static struct regulator_consumer_supply int3472_ana_consumer_supplies[] = {
> + REGULATOR_SUPPLY("avdd", "i2c-OVTI13B1:01"), };
> +
> +static struct regulator_consumer_supply int3472_vcm_consumer_supplies[] = {
> + REGULATOR_SUPPLY("vdd", "i2c-OVTI13B1:01"), };
> +
> +static struct regulator_consumer_supply int3472_vsio_consumer_supplies[] = {
> + REGULATOR_SUPPLY("dovdd", "i2c-OVTI13B1:01"),
> + REGULATOR_SUPPLY("vsio", "i2c-OVTI13B1:01"),
> + REGULATOR_SUPPLY("vddd", "i2c-OVTI13B1:01"), };
> +
> +static struct regulator_consumer_supply int3472_aux1_consumer_supplies[] = {
> + REGULATOR_SUPPLY("vdda", "i2c-OVTI13B1:01"), };
> +
> +static struct regulator_consumer_supply int3472_aux2_consumer_supplies[] = {
> + REGULATOR_SUPPLY("vdddo", "i2c-OVTI13B1:01"), };
> +
> static const struct regulator_init_data dell_7212_tps68470_core_reg_init_data = {
> .constraints = {
> .min_uV = 1200000,
> @@ -220,6 +248,82 @@ static const struct regulator_init_data dell_7212_tps68470_aux2_reg_init_data =
> .consumer_supplies = int3479_aux2_consumer_supplies, };
>
> +static const struct regulator_init_data intel_nvl_tps68470_core_reg_init_data = {
> + .constraints = {
> + .min_uV = 1200000,
> + .max_uV = 1200000,
> + .apply_uV = true,
> + .always_on = true,
> + },
> + .num_consumer_supplies = ARRAY_SIZE(int3472_core_consumer_supplies),
> + .consumer_supplies = int3472_core_consumer_supplies, };
> +
> +static const struct regulator_init_data intel_nvl_tps68470_ana_reg_init_data = {
> + .constraints = {
> + .min_uV = 2815200,
> + .max_uV = 2815200,
> + .apply_uV = true,
> + .always_on = true,
> + },
> + .num_consumer_supplies = ARRAY_SIZE(int3472_ana_consumer_supplies),
> + .consumer_supplies = int3472_ana_consumer_supplies, };
> +
> +static const struct regulator_init_data intel_nvl_tps68470_vcm_reg_init_data = {
> + .constraints = {
> + .min_uV = 2815200,
> + .max_uV = 2815200,
> + .apply_uV = true,
> + .always_on = true,
> + },
> + .num_consumer_supplies = ARRAY_SIZE(int3472_vcm_consumer_supplies),
> + .consumer_supplies = int3472_vcm_consumer_supplies, };
> +
> +/* Ensure the always-on VIO regulator has the same voltage as VSIO */
> +static const struct regulator_init_data intel_nvl_tps68470_vio_reg_init_data = {
> + .constraints = {
> + .min_uV = 1800600,
> + .max_uV = 1800600,
> + .apply_uV = true,
> + .always_on = true,
> + },
> +};
> +
> +static const struct regulator_init_data intel_nvl_tps68470_vsio_reg_init_data = {
> + .constraints = {
> + .min_uV = 1800600,
> + .max_uV = 1800600,
> + .apply_uV = true,
> + .always_on = true,
> + },
> + .num_consumer_supplies = ARRAY_SIZE(int3472_vsio_consumer_supplies),
> + .consumer_supplies = int3472_vsio_consumer_supplies, };
> +
> +static const struct regulator_init_data intel_nvl_tps68470_aux1_reg_init_data = {
> + .constraints = {
> + .min_uV = 2815200,
> + .max_uV = 2815200,
> + .apply_uV = 1,
> + .valid_ops_mask = REGULATOR_CHANGE_STATUS,
> + },
> + .num_consumer_supplies = ARRAY_SIZE(int3472_aux1_consumer_supplies),
> + .consumer_supplies = int3472_aux1_consumer_supplies, };
> +
> +static const struct regulator_init_data intel_nvl_tps68470_aux2_reg_init_data = {
> + .constraints = {
> + .min_uV = 1800600,
> + .max_uV = 1800600,
> + .apply_uV = 1,
> + .valid_ops_mask = REGULATOR_CHANGE_STATUS,
> + },
> + .num_consumer_supplies = ARRAY_SIZE(int3472_aux2_consumer_supplies),
> + .consumer_supplies = int3472_aux2_consumer_supplies, };
> +
> static const struct tps68470_regulator_platform_data dell_7212_tps68470_pdata = {
> .reg_init_data = {
> [TPS68470_CORE] = &dell_7212_tps68470_core_reg_init_data,
> @@ -232,6 +336,18 @@ static const struct tps68470_regulator_platform_data dell_7212_tps68470_pdata =
> },
> };
>
> +static const struct tps68470_regulator_platform_data intel_nvl_tps68470_pdata = {
> + .reg_init_data = {
> + [TPS68470_CORE] = &intel_nvl_tps68470_core_reg_init_data,
> + [TPS68470_ANA] = &intel_nvl_tps68470_ana_reg_init_data,
> + [TPS68470_VCM] = &intel_nvl_tps68470_vcm_reg_init_data,
> + [TPS68470_VIO] = &intel_nvl_tps68470_vio_reg_init_data,
> + [TPS68470_VSIO] = &intel_nvl_tps68470_vsio_reg_init_data,
> + [TPS68470_AUX1] = &intel_nvl_tps68470_aux1_reg_init_data,
> + [TPS68470_AUX2] = &intel_nvl_tps68470_aux2_reg_init_data,
> + },
> +};
> +
> static struct gpiod_lookup_table surface_go_int347a_gpios = {
> .dev_id = "i2c-INT347A:00",
> .table = {
> @@ -258,6 +374,23 @@ static struct gpiod_lookup_table dell_7212_int3479_gpios = {
> }
> };
>
> +static struct gpiod_lookup_table intel_nvl_int347a_gpios = {
> + .dev_id = "i2c-OVTI13B1:01",
> + .table = {
> + GPIO_LOOKUP("tps68470-gpio", 9, "reset", GPIO_ACTIVE_LOW),
> + GPIO_LOOKUP("tps68470-gpio", 8, "s_idle", GPIO_ACTIVE_LOW),
> + { }
> + }
> +};
> +
> +static struct gpiod_lookup_table intel_nvl_int347e_gpios = {
> + .dev_id = "i2c-OVTI13B1:01",
> + .table = {
> + GPIO_LOOKUP("tps68470-gpio", 7, "s_enable", GPIO_ACTIVE_LOW),
> + { }
> + }
> +};
> +
> static const struct int3472_tps68470_board_data surface_go_tps68470_board_data = {
> .dev_name = "i2c-INT3472:05",
> .tps68470_regulator_pdata = &surface_go_tps68470_pdata, @@ -287,6 +420,16 @@ static const struct int3472_tps68470_board_data dell_7212_tps68470_board_data =
> },
> };
>
> +static const struct int3472_tps68470_board_data intel_nvl_tps68470_board_data = {
> + .dev_name = "i2c-INT3472:04",
> + .tps68470_regulator_pdata = &intel_nvl_tps68470_pdata,
> + .n_gpiod_lookups = 2,
> + .tps68470_gpio_lookup_tables = {
> + &intel_nvl_int347a_gpios,
> + &intel_nvl_int347e_gpios,
> + },
> +};
> +
> static const struct dmi_system_id int3472_tps68470_board_data_table[] = {
> {
> .matches = {
> @@ -316,6 +459,13 @@ static const struct dmi_system_id int3472_tps68470_board_data_table[] = {
> },
> .driver_data = (void *)&dell_7212_tps68470_board_data,
> },
> + {
> + .matches = {
> + DMI_EXACT_MATCH(DMI_SYS_VENDOR, "Intel Corporation"),
> + DMI_EXACT_MATCH(DMI_PRODUCT_NAME, "Nova Lake Client Platform"),
> + },
> + .driver_data = (void *)&intel_nvl_tps68470_board_data,
> + },
> { }
> };
>
--
Regards,
Sakari Ailus
next prev parent reply other threads:[~2026-03-23 10:41 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-03-06 16:30 [PATCH v4 0/2] Add TPS68470 power supply support for ov13b10 sensor Arun T
2026-03-06 16:30 ` [PATCH v4 1/2] platform/x86: int3472: Add TPS68470 board data for Intel nvl Arun T
2026-03-23 6:12 ` T, Arun
2026-03-23 10:41 ` sakari.ailus [this message]
2026-03-24 8:27 ` T, Arun
2026-03-25 10:09 ` Dan Scally
2026-03-27 13:45 ` T, Arun
2026-03-06 16:30 ` [PATCH v4 2/2] media: i2c: ov13b10: support tps68470 regulator and gpio Arun T
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=acEY6_sFAnb3aHY6@kekkonen.localdomain \
--to=sakari.ailus@linux.intel.com \
--cc=arec.kao@intel.com \
--cc=arun.t@intel.com \
--cc=dan.scally@ideasonboard.com \
--cc=ilpo.jarvinen@linux.intel.com \
--cc=johannes.goede@oss.qualcomm.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-media@vger.kernel.org \
--cc=mehdi.djait@intel.com \
--cc=platform-driver-x86@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
Powered by JetHome