Re: [PATCH net 1/2] net: ti: icssg-prueth: Fix firmware load sequence.

[Roger Quadros <rogerq@kernel.org>]

Hi,

On 06/11/2024 09:40, Meghana Malladi wrote:
> From: MD Danish Anwar <danishanwar@ti.com>
> 
> Timesync related operations are ran in PRU0 cores for both ICSSG SLICE0
> and SLICE1. Currently whenever any ICSSG interface comes up we load the
> respective firmwares to PRU cores and whenever interface goes down, we
> stop the respective cores. Due to this, when SLICE0 goes down while
> SLICE1 is still active, PRU0 firmwares are unloaded and PRU0 core is
> stopped. This results in clock jump for SLICE1 interface as the timesync
> related operations are no longer running.
> 
> Fix this by running both PRU0 and PRU1 firmwares as long as at least 1
> ICSSG interface is up.
> 
> rx_flow_id is updated before firmware is loaded. Once firmware is loaded,
> it reads the flow_id and uses it for rx. emac_fdb_flow_id_updated() is
> used to let firmware know that the flow_id has been updated and to use the
> latest rx_flow_id.

is rx_flow_id releated to timesync releated issue that this patch is fixing?
If not please split it into separate patch and mention what functionality
it is fixing.

> 
> Fixes: c1e0230eeaab ("net: ti: icss-iep: Add IEP driver")
> Signed-off-by: MD Danish Anwar <danishanwar@ti.com>
> Signed-off-by: Meghana Malladi <m-malladi@ti.com>
> ---
>  drivers/net/ethernet/ti/icssg/icssg_config.c | 28 ++++++++++
>  drivers/net/ethernet/ti/icssg/icssg_config.h |  1 +
>  drivers/net/ethernet/ti/icssg/icssg_prueth.c | 58 ++++++++++++++++----
>  drivers/net/ethernet/ti/icssg/icssg_prueth.h |  1 +
>  4 files changed, 77 insertions(+), 11 deletions(-)
> 
> diff --git a/drivers/net/ethernet/ti/icssg/icssg_config.c b/drivers/net/ethernet/ti/icssg/icssg_config.c
> index 5d2491c2943a..f1f0c8659e2d 100644
> --- a/drivers/net/ethernet/ti/icssg/icssg_config.c
> +++ b/drivers/net/ethernet/ti/icssg/icssg_config.c
> @@ -786,3 +786,31 @@ void icssg_set_pvid(struct prueth *prueth, u8 vid, u8 port)
>  		writel(pvid, prueth->shram.va + EMAC_ICSSG_SWITCH_PORT0_DEFAULT_VLAN_OFFSET);
>  }
>  EXPORT_SYMBOL_GPL(icssg_set_pvid);
> +
> +int emac_fdb_flow_id_updated(struct prueth_emac *emac)
> +{
> +	struct mgmt_cmd_rsp fdb_cmd_rsp = { 0 };
> +	int slice = prueth_emac_slice(emac);
> +	struct mgmt_cmd fdb_cmd = { 0 };
> +	int ret = 0;
> +
> +	fdb_cmd.header = ICSSG_FW_MGMT_CMD_HEADER;
> +	fdb_cmd.type   = ICSSG_FW_MGMT_FDB_CMD_TYPE_RX_FLOW;
> +	fdb_cmd.seqnum = ++(emac->prueth->icssg_hwcmdseq);
> +	fdb_cmd.param  = 0;
> +
> +	fdb_cmd.param |= (slice << 4);
> +	fdb_cmd.cmd_args[0] = 0;
> +
> +	ret = icssg_send_fdb_msg(emac, &fdb_cmd, &fdb_cmd_rsp);
> +
> +	if (ret)
> +		return ret;
> +
> +	WARN_ON(fdb_cmd.seqnum != fdb_cmd_rsp.seqnum);
> +	if (fdb_cmd_rsp.status == 1)
> +		return 0;
> +
> +	return -EINVAL;
> +}
> +EXPORT_SYMBOL_GPL(emac_fdb_flow_id_updated);
> diff --git a/drivers/net/ethernet/ti/icssg/icssg_config.h b/drivers/net/ethernet/ti/icssg/icssg_config.h
> index 92c2deaa3068..c884e9fa099e 100644
> --- a/drivers/net/ethernet/ti/icssg/icssg_config.h
> +++ b/drivers/net/ethernet/ti/icssg/icssg_config.h
> @@ -55,6 +55,7 @@ struct icssg_rxq_ctx {
>  #define ICSSG_FW_MGMT_FDB_CMD_TYPE	0x03
>  #define ICSSG_FW_MGMT_CMD_TYPE		0x04
>  #define ICSSG_FW_MGMT_PKT		0x80000000
> +#define ICSSG_FW_MGMT_FDB_CMD_TYPE_RX_FLOW	0x05
>  
>  struct icssg_r30_cmd {
>  	u32 cmd[4];
> diff --git a/drivers/net/ethernet/ti/icssg/icssg_prueth.c b/drivers/net/ethernet/ti/icssg/icssg_prueth.c
> index 0556910938fa..9df67539285b 100644
> --- a/drivers/net/ethernet/ti/icssg/icssg_prueth.c
> +++ b/drivers/net/ethernet/ti/icssg/icssg_prueth.c
> @@ -534,6 +534,7 @@ static int emac_ndo_open(struct net_device *ndev)
>  {
>  	struct prueth_emac *emac = netdev_priv(ndev);
>  	int ret, i, num_data_chn = emac->tx_ch_num;
> +	struct icssg_flow_cfg __iomem *flow_cfg;
>  	struct prueth *prueth = emac->prueth;
>  	int slice = prueth_emac_slice(emac);
>  	struct device *dev = prueth->dev;
> @@ -549,8 +550,12 @@ static int emac_ndo_open(struct net_device *ndev)
>  	/* set h/w MAC as user might have re-configured */
>  	ether_addr_copy(emac->mac_addr, ndev->dev_addr);
>  
> +	if (!prueth->emacs_initialized) {
> +		icssg_class_default(prueth->miig_rt, ICSS_SLICE0, 0, false);
> +		icssg_class_default(prueth->miig_rt, ICSS_SLICE1, 0, false);
> +	}
> +
>  	icssg_class_set_mac_addr(prueth->miig_rt, slice, emac->mac_addr);
> -	icssg_class_default(prueth->miig_rt, slice, 0, false);
>  	icssg_ft1_set_mac_addr(prueth->miig_rt, slice, emac->mac_addr);
>  
>  	/* Notify the stack of the actual queue counts. */
> @@ -588,10 +593,31 @@ static int emac_ndo_open(struct net_device *ndev)
>  		goto cleanup_napi;
>  	}
>  
> -	/* reset and start PRU firmware */
> -	ret = prueth_emac_start(prueth, emac);
> -	if (ret)
> -		goto free_rx_irq;
> +	if (!prueth->emacs_initialized) {
> +		if (prueth->emac[ICSS_SLICE0]) {
> +			ret = prueth_emac_start(prueth, prueth->emac[ICSS_SLICE0]);
> +			if (ret) {
> +				netdev_err(ndev, "unable to start fw for slice %d", ICSS_SLICE0);
> +				goto free_rx_irq;
> +			}
> +		}
> +		if (prueth->emac[ICSS_SLICE1]) {
> +			ret = prueth_emac_start(prueth, prueth->emac[ICSS_SLICE1]);
> +			if (ret) {
> +				netdev_err(ndev, "unable to start fw for slice %d", ICSS_SLICE1);
> +				goto halt_slice0_prus;
> +			}

Did I understand right: SLICE0 needs to be always running if any of the
interface is up but SLICE0 doesn't need to be running if only SLICE0
interface is running.

If yes then you need to update the patch so SLICE1 is not always running.

> +		}
> +	}
> +
> +	flow_cfg = emac->dram.va + ICSSG_CONFIG_OFFSET + PSI_L_REGULAR_FLOW_ID_BASE_OFFSET;
> +	writew(emac->rx_flow_id_base, &flow_cfg->rx_base_flow);
> +	ret = emac_fdb_flow_id_updated(emac);
> +
> +	if (ret) {
> +		netdev_err(ndev, "Failed to update Rx Flow ID %d", ret);
> +		goto stop;
> +	}
>  
>  	icssg_mii_update_mtu(prueth->mii_rt, slice, ndev->max_mtu);
>  
> @@ -644,7 +670,11 @@ static int emac_ndo_open(struct net_device *ndev)
>  free_tx_ts_irq:
>  	free_irq(emac->tx_ts_irq, emac);
>  stop:
> -	prueth_emac_stop(emac);
> +	if (prueth->emac[ICSS_SLICE1])
> +		prueth_emac_stop(prueth->emac[ICSS_SLICE1]);
> +halt_slice0_prus:
> +	if (prueth->emac[ICSS_SLICE0])
> +		prueth_emac_stop(prueth->emac[ICSS_SLICE0]);
>  free_rx_irq:
>  	free_irq(emac->rx_chns.irq[rx_flow], emac);
>  cleanup_napi:
> @@ -680,7 +710,10 @@ static int emac_ndo_stop(struct net_device *ndev)
>  	if (ndev->phydev)
>  		phy_stop(ndev->phydev);
>  
> -	icssg_class_disable(prueth->miig_rt, prueth_emac_slice(emac));
> +	if (prueth->emacs_initialized == 1) {
> +		icssg_class_disable(prueth->miig_rt, ICSS_SLICE0);
> +		icssg_class_disable(prueth->miig_rt, ICSS_SLICE1);
> +	}
>  
>  	if (emac->prueth->is_hsr_offload_mode)
>  		__dev_mc_unsync(ndev, icssg_prueth_hsr_del_mcast);
> @@ -719,11 +752,14 @@ static int emac_ndo_stop(struct net_device *ndev)
>  	/* Destroying the queued work in ndo_stop() */
>  	cancel_delayed_work_sync(&emac->stats_work);
>  
> -	if (prueth->emacs_initialized == 1)
> +	if (prueth->emacs_initialized == 1) {
>  		icss_iep_exit(emac->iep);
> -
> -	/* stop PRUs */
> -	prueth_emac_stop(emac);
> +		/* stop PRUs */
> +		if (prueth->emac[ICSS_SLICE0])
> +			prueth_emac_stop(prueth->emac[ICSS_SLICE0]);
> +		if (prueth->emac[ICSS_SLICE1])
> +			prueth_emac_stop(prueth->emac[ICSS_SLICE1]);
> +	}
>  
>  	free_irq(emac->tx_ts_irq, emac);
>  
> diff --git a/drivers/net/ethernet/ti/icssg/icssg_prueth.h b/drivers/net/ethernet/ti/icssg/icssg_prueth.h
> index 8722bb4a268a..c4f5f0349ae7 100644
> --- a/drivers/net/ethernet/ti/icssg/icssg_prueth.h
> +++ b/drivers/net/ethernet/ti/icssg/icssg_prueth.h
> @@ -365,6 +365,7 @@ void icssg_vtbl_modify(struct prueth_emac *emac, u8 vid, u8 port_mask,
>  		       u8 untag_mask, bool add);
>  u16 icssg_get_pvid(struct prueth_emac *emac);
>  void icssg_set_pvid(struct prueth *prueth, u8 vid, u8 port);
> +int emac_fdb_flow_id_updated(struct prueth_emac *emac);
>  #define prueth_napi_to_tx_chn(pnapi) \
>  	container_of(pnapi, struct prueth_tx_chn, napi_tx)
>  

-- 
cheers,
-roger